Run Lisp.go
Closed this issue · 26 comments
Tauqeer20 commented
When I run the lisp.go, that's show the error which is mentioned in the attached file.
Anyone have any idea why this shows this error please help me out.
Thanks
farinacci commented
You should not run it that way. You uncomment the LISP_RUN_LISP_XTR line in RUN-LISP and then you run RESTART-LISP.
#
# Run go data-plane. Called lisp-xtr.
#
#setenv LISP_RUN_LISP_XTR
#setenv LISP_USE_AF_PACKET
This will run the LISP data-plane using the go code.
Dino
… On Dec 20, 2022, at 10:48 AM, Tauqeer20 ***@***.***> wrote:
When I run the lisp.go, that's show the error which is mentioned in the attached file.
Anyone have any idea why this shows this error please help me out.
Thanks
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you are subscribed to this thread.
Tauqeer20 commented
After clone the repo, I try to run the lisp.go but they didnt run. As you
can mention some steps, Can i try it after clone then it will run…??? Or
there is some other method to run the go file after cloning the repo…???
Hoping to hear from you soon
Thanks
On Wed, 21 Dec 2022 at 2:19 AM, Dino Farinacci ***@***.***>
wrote:
… You should not run it that way. You uncomment the LISP_RUN_LISP_XTR line
in RUN-LISP and then you run RESTART-LISP.
#
# Run go data-plane. Called lisp-xtr.
#
#setenv LISP_RUN_LISP_XTR
#setenv LISP_USE_AF_PACKET
This will run the LISP data-plane using the go code.
Dino
> On Dec 20, 2022, at 10:48 AM, Tauqeer20 ***@***.***> wrote:
>
>
> When I run the lisp.go, that's show the error which is mentioned in the
attached file.
> Anyone have any idea why this shows this error please help me out.
>
> Thanks
>
>
> —
> Reply to this email directly, view it on GitHub, or unsubscribe.
> You are receiving this because you are subscribed to this thread.
>
—
Reply to this email directly, view it on GitHub
<#19 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2MEFBMVWDYYYV5JCCJGFN3WOIPH7ANCNFSM6AAAAAATEZ7ZUE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
farinacci commented
Even if you have a repo cloned, the go file is precompiled and the binary is the file lisp-xtr. The only way for you to run it and make it work successfully is using the method I indicated below.
You do not have to compile any code. Use the release in ./build/latest (which is version 0.385). Do not untar the tarball in the source directory, use a directory like ~/lispers.net/.
Dino
… On Dec 21, 2022, at 7:14 AM, Tauqeer20 ***@***.***> wrote:
After clone the repo, I try to run the lisp.go but they didnt run. As you
can mention some steps, Can i try it after clone then it will run…??? Or
there is some other method to run the go file after cloning the repo…???
Hoping to hear from you soon
Thanks
On Wed, 21 Dec 2022 at 2:19 AM, Dino Farinacci ***@***.***>
wrote:
> You should not run it that way. You uncomment the LISP_RUN_LISP_XTR line
> in RUN-LISP and then you run RESTART-LISP.
>
> #
> # Run go data-plane. Called lisp-xtr.
> #
> #setenv LISP_RUN_LISP_XTR
> #setenv LISP_USE_AF_PACKET
>
> This will run the LISP data-plane using the go code.
>
> Dino
>
> > On Dec 20, 2022, at 10:48 AM, Tauqeer20 ***@***.***> wrote:
> >
> >
> > When I run the lisp.go, that's show the error which is mentioned in the
> attached file.
> > Anyone have any idea why this shows this error please help me out.
> >
> > Thanks
> >
> >
> > —
> > Reply to this email directly, view it on GitHub, or unsubscribe.
> > You are receiving this because you are subscribed to this thread.
> >
>
> —
> Reply to this email directly, view it on GitHub
> <#19 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/A2MEFBMVWDYYYV5JCCJGFN3WOIPH7ANCNFSM6AAAAAATEZ7ZUE>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you commented.
Tauqeer20 commented
I have tried the steps you mentioned earlier but still there is error. I
mentioned it in the attached folder. Any file I tried, they showed the same
error message, I also attached the GoPath and GoRoot. With that I also
mentioned that where I extract the GO folder which is in Home.In Go folder
and then src folder I clone the repo which is mentioned. Please check it
and let me know where the problem is.
Thanks and Regards
Muhammad Tauqeer
On Thu, 22 Dec 2022 at 01:38, Dino Farinacci ***@***.***>
wrote:
… Even if you have a repo cloned, the go file is precompiled and the binary
is the file lisp-xtr. The only way for you to run it and make it work
successfully is using the method I indicated below.
You do not have to compile any code. Use the release in ./build/latest
(which is version 0.385). Do not untar the tarball in the source directory,
use a directory like ~/lispers.net/.
Dino
> On Dec 21, 2022, at 7:14 AM, Tauqeer20 ***@***.***> wrote:
>
>
> After clone the repo, I try to run the lisp.go but they didnt run. As you
> can mention some steps, Can i try it after clone then it will run…??? Or
> there is some other method to run the go file after cloning the repo…???
>
> Hoping to hear from you soon
>
> Thanks
>
> On Wed, 21 Dec 2022 at 2:19 AM, Dino Farinacci ***@***.***>
> wrote:
>
> > You should not run it that way. You uncomment the LISP_RUN_LISP_XTR
line
> > in RUN-LISP and then you run RESTART-LISP.
> >
> > #
> > # Run go data-plane. Called lisp-xtr.
> > #
> > #setenv LISP_RUN_LISP_XTR
> > #setenv LISP_USE_AF_PACKET
> >
> > This will run the LISP data-plane using the go code.
> >
> > Dino
> >
> > > On Dec 20, 2022, at 10:48 AM, Tauqeer20 ***@***.***> wrote:
> > >
> > >
> > > When I run the lisp.go, that's show the error which is mentioned in
the
> > attached file.
> > > Anyone have any idea why this shows this error please help me out.
> > >
> > > Thanks
> > >
> > >
> > > —
> > > Reply to this email directly, view it on GitHub, or unsubscribe.
> > > You are receiving this because you are subscribed to this thread.
> > >
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
#19 (comment)
>,
> > or unsubscribe
> > <
https://github.com/notifications/unsubscribe-auth/A2MEFBMVWDYYYV5JCCJGFN3WOIPH7ANCNFSM6AAAAAATEZ7ZUE
>
> > .
> > You are receiving this because you authored the thread.Message ID:
> > ***@***.***>
> >
> —
> Reply to this email directly, view it on GitHub, or unsubscribe.
> You are receiving this because you commented.
>
—
Reply to this email directly, view it on GitHub
<#19 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2MEFBONWGTX6HVN4JF4UITWONTEVANCNFSM6AAAAAATEZ7ZUE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
farinacci commented
I have tried the steps you mentioned earlier but still there is error. I
mentioned it in the attached folder. Any file I tried, they showed the same
I don't see an attachment. Show me what you did from a screen shot.
error message, I also attached the GoPath and GoRoot. With that I also
mentioned that where I extract the GO folder which is in Home.In Go folder
and then src folder I clone the repo which is mentioned. Please check it
and let me know where the problem is.
You do not have to mess with any go stuff. Unless your system needs configuration. Did you read these instructions from the build/README file?
You shouldn't have to build it but you need the libraries above.
Dino
Tauqeer20 commented
Yes I read the build/readme. But still there is error. I mention snap above
if you are able to see and then tell me whats the problem.
Thanks
On Fri, 23 Dec 2022 at 12:02 PM, Muhammad Tauqeer ***@***.***>
wrote:
…
On Fri, 23 Dec 2022 at 02:15, Dino Farinacci ***@***.***>
wrote:
> > I have tried the steps you mentioned earlier but still there is error. I
> > mentioned it in the attached folder. Any file I tried, they showed the
> same
>
> I don't see an attachment. Show me what you did from a screen shot.
>
> > error message, I also attached the GoPath and GoRoot. With that I also
> > mentioned that where I extract the GO folder which is in Home.In Go
> folder
> > and then src folder I clone the repo which is mentioned. Please check it
> > and let me know where the problem is.
>
> You do not have to mess with any go stuff. Unless your system needs
> configuration. Did you read these instructions from the build/README file?
>
>
> You shouldn't have to build it but you need the libraries above.
>
> Dino
>
> —
> Reply to this email directly, view it on GitHub
> <#19 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/A2MEFBJ6ZDYIK7FDGPKL2QDWOTAIDANCNFSM6AAAAAATEZ7ZUE>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
farinacci commented
I am reading this from email and haven't seen any error messages. I will have a look on github on Monday.
Dino
… On Dec 24, 2022, at 2:21 AM, Tauqeer20 ***@***.***> wrote:
Yes I read the build/readme. But still there is error. I mention snap above
if you are able to see and then tell me whats the problem.
Thanks
On Fri, 23 Dec 2022 at 12:02 PM, Muhammad Tauqeer ***@***.***>
wrote:
>
>
> On Fri, 23 Dec 2022 at 02:15, Dino Farinacci ***@***.***>
> wrote:
>
>> > I have tried the steps you mentioned earlier but still there is error. I
>> > mentioned it in the attached folder. Any file I tried, they showed the
>> same
>>
>> I don't see an attachment. Show me what you did from a screen shot.
>>
>> > error message, I also attached the GoPath and GoRoot. With that I also
>> > mentioned that where I extract the GO folder which is in Home.In Go
>> folder
>> > and then src folder I clone the repo which is mentioned. Please check it
>> > and let me know where the problem is.
>>
>> You do not have to mess with any go stuff. Unless your system needs
>> configuration. Did you read these instructions from the build/README file?
>>
>>
>> You shouldn't have to build it but you need the libraries above.
>>
>> Dino
>>
>> —
>> Reply to this email directly, view it on GitHub
>> <#19 (comment)>,
>> or unsubscribe
>> <https://github.com/notifications/unsubscribe-auth/A2MEFBJ6ZDYIK7FDGPKL2QDWOTAIDANCNFSM6AAAAAATEZ7ZUE>
>> .
>> You are receiving this because you authored the thread.Message ID:
>> ***@***.***>
>>
>
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you commented.
Tauqeer20 commented
Ok, thanks.
On Sat, 24 Dec 2022 at 9:03 PM, Dino Farinacci ***@***.***>
wrote:
… I am reading this from email and haven't seen any error messages. I will
have a look on github on Monday.
Dino
> On Dec 24, 2022, at 2:21 AM, Tauqeer20 ***@***.***> wrote:
>
>
> Yes I read the build/readme. But still there is error. I mention snap
above
> if you are able to see and then tell me whats the problem.
>
> Thanks
>
> On Fri, 23 Dec 2022 at 12:02 PM, Muhammad Tauqeer ***@***.***>
> wrote:
>
> >
> >
> > On Fri, 23 Dec 2022 at 02:15, Dino Farinacci ***@***.***>
> > wrote:
> >
> >> > I have tried the steps you mentioned earlier but still there is
error. I
> >> > mentioned it in the attached folder. Any file I tried, they showed
the
> >> same
> >>
> >> I don't see an attachment. Show me what you did from a screen shot.
> >>
> >> > error message, I also attached the GoPath and GoRoot. With that I
also
> >> > mentioned that where I extract the GO folder which is in Home.In Go
> >> folder
> >> > and then src folder I clone the repo which is mentioned. Please
check it
> >> > and let me know where the problem is.
> >>
> >> You do not have to mess with any go stuff. Unless your system needs
> >> configuration. Did you read these instructions from the build/README
file?
> >>
> >>
> >> You shouldn't have to build it but you need the libraries above.
> >>
> >> Dino
> >>
> >> —
> >> Reply to this email directly, view it on GitHub
> >> <
#19 (comment)
>,
> >> or unsubscribe
> >> <
https://github.com/notifications/unsubscribe-auth/A2MEFBJ6ZDYIK7FDGPKL2QDWOTAIDANCNFSM6AAAAAATEZ7ZUE
>
> >> .
> >> You are receiving this because you authored the thread.Message ID:
> >> ***@***.***>
> >>
> >
> —
> Reply to this email directly, view it on GitHub, or unsubscribe.
> You are receiving this because you commented.
>
—
Reply to this email directly, view it on GitHub
<#19 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2MEFBIJ7MMJWVRNKUP72PDWO4NE5ANCNFSM6AAAAAATEZ7ZUE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
farinacci commented
If you can email me the error messages to ***@***.*** that would make it simpler. Thanks.
Dino
… On Dec 24, 2022, at 8:04 AM, Tauqeer20 ***@***.***> wrote:
Ok, thanks.
On Sat, 24 Dec 2022 at 9:03 PM, Dino Farinacci ***@***.***>
wrote:
> I am reading this from email and haven't seen any error messages. I will
> have a look on github on Monday.
>
> Dino
>
> > On Dec 24, 2022, at 2:21 AM, Tauqeer20 ***@***.***> wrote:
> >
> >
> > Yes I read the build/readme. But still there is error. I mention snap
> above
> > if you are able to see and then tell me whats the problem.
> >
> > Thanks
> >
> > On Fri, 23 Dec 2022 at 12:02 PM, Muhammad Tauqeer ***@***.***>
> > wrote:
> >
> > >
> > >
> > > On Fri, 23 Dec 2022 at 02:15, Dino Farinacci ***@***.***>
> > > wrote:
> > >
> > >> > I have tried the steps you mentioned earlier but still there is
> error. I
> > >> > mentioned it in the attached folder. Any file I tried, they showed
> the
> > >> same
> > >>
> > >> I don't see an attachment. Show me what you did from a screen shot.
> > >>
> > >> > error message, I also attached the GoPath and GoRoot. With that I
> also
> > >> > mentioned that where I extract the GO folder which is in Home.In Go
> > >> folder
> > >> > and then src folder I clone the repo which is mentioned. Please
> check it
> > >> > and let me know where the problem is.
> > >>
> > >> You do not have to mess with any go stuff. Unless your system needs
> > >> configuration. Did you read these instructions from the build/README
> file?
> > >>
> > >>
> > >> You shouldn't have to build it but you need the libraries above.
> > >>
> > >> Dino
> > >>
> > >> —
> > >> Reply to this email directly, view it on GitHub
> > >> <
> #19 (comment)
> >,
> > >> or unsubscribe
> > >> <
> https://github.com/notifications/unsubscribe-auth/A2MEFBJ6ZDYIK7FDGPKL2QDWOTAIDANCNFSM6AAAAAATEZ7ZUE
> >
> > >> .
> > >> You are receiving this because you authored the thread.Message ID:
> > >> ***@***.***>
> > >>
> > >
> > —
> > Reply to this email directly, view it on GitHub, or unsubscribe.
> > You are receiving this because you commented.
> >
>
> —
> Reply to this email directly, view it on GitHub
> <#19 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/A2MEFBIJ7MMJWVRNKUP72PDWO4NE5ANCNFSM6AAAAAATEZ7ZUE>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you commented.
Tauqeer20 commented
Your email is hidden.
On Sat, 24 Dec 2022 at 9:06 PM, Dino Farinacci ***@***.***>
wrote:
… If you can email me the error messages to ***@***.*** that would make it
simpler. Thanks.
Dino
> On Dec 24, 2022, at 8:04 AM, Tauqeer20 ***@***.***> wrote:
>
>
> Ok, thanks.
>
> On Sat, 24 Dec 2022 at 9:03 PM, Dino Farinacci ***@***.***>
> wrote:
>
> > I am reading this from email and haven't seen any error messages. I
will
> > have a look on github on Monday.
> >
> > Dino
> >
> > > On Dec 24, 2022, at 2:21 AM, Tauqeer20 ***@***.***> wrote:
> > >
> > >
> > > Yes I read the build/readme. But still there is error. I mention snap
> > above
> > > if you are able to see and then tell me whats the problem.
> > >
> > > Thanks
> > >
> > > On Fri, 23 Dec 2022 at 12:02 PM, Muhammad Tauqeer ***@***.***>
> > > wrote:
> > >
> > > >
> > > >
> > > > On Fri, 23 Dec 2022 at 02:15, Dino Farinacci ***@***.***>
> > > > wrote:
> > > >
> > > >> > I have tried the steps you mentioned earlier but still there is
> > error. I
> > > >> > mentioned it in the attached folder. Any file I tried, they
showed
> > the
> > > >> same
> > > >>
> > > >> I don't see an attachment. Show me what you did from a screen
shot.
> > > >>
> > > >> > error message, I also attached the GoPath and GoRoot. With that
I
> > also
> > > >> > mentioned that where I extract the GO folder which is in
Home.In Go
> > > >> folder
> > > >> > and then src folder I clone the repo which is mentioned. Please
> > check it
> > > >> > and let me know where the problem is.
> > > >>
> > > >> You do not have to mess with any go stuff. Unless your system
needs
> > > >> configuration. Did you read these instructions from the
build/README
> > file?
> > > >>
> > > >>
> > > >> You shouldn't have to build it but you need the libraries above.
> > > >>
> > > >> Dino
> > > >>
> > > >> —
> > > >> Reply to this email directly, view it on GitHub
> > > >> <
> >
#19 (comment)
> > >,
> > > >> or unsubscribe
> > > >> <
> >
https://github.com/notifications/unsubscribe-auth/A2MEFBJ6ZDYIK7FDGPKL2QDWOTAIDANCNFSM6AAAAAATEZ7ZUE
> > >
> > > >> .
> > > >> You are receiving this because you authored the thread.Message ID:
> > > >> ***@***.***>
> > > >>
> > > >
> > > —
> > > Reply to this email directly, view it on GitHub, or unsubscribe.
> > > You are receiving this because you commented.
> > >
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
#19 (comment)
>,
> > or unsubscribe
> > <
https://github.com/notifications/unsubscribe-auth/A2MEFBIJ7MMJWVRNKUP72PDWO4NE5ANCNFSM6AAAAAATEZ7ZUE
>
> > .
> > You are receiving this because you authored the thread.Message ID:
> > ***@***.***>
> >
> —
> Reply to this email directly, view it on GitHub, or unsubscribe.
> You are receiving this because you commented.
>
—
Reply to this email directly, view it on GitHub
<#19 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2MEFBOTTHJDGRNLC2OD7HDWO4NQFANCNFSM6AAAAAATEZ7ZUE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
Tauqeer20 commented
Send me your email that I text you there.
Thanks
On Sat, 24 Dec 2022 at 9:07 PM, Muhammad Tauqeer ***@***.***>
wrote:
… Your email is hidden.
On Sat, 24 Dec 2022 at 9:06 PM, Dino Farinacci ***@***.***>
wrote:
> If you can email me the error messages to ***@***.*** that would make it
> simpler. Thanks.
>
> Dino
>
> > On Dec 24, 2022, at 8:04 AM, Tauqeer20 ***@***.***> wrote:
> >
> >
> > Ok, thanks.
> >
> > On Sat, 24 Dec 2022 at 9:03 PM, Dino Farinacci ***@***.***>
> > wrote:
> >
> > > I am reading this from email and haven't seen any error messages. I
> will
> > > have a look on github on Monday.
> > >
> > > Dino
> > >
> > > > On Dec 24, 2022, at 2:21 AM, Tauqeer20 ***@***.***> wrote:
> > > >
> > > >
> > > > Yes I read the build/readme. But still there is error. I mention
> snap
> > > above
> > > > if you are able to see and then tell me whats the problem.
> > > >
> > > > Thanks
> > > >
> > > > On Fri, 23 Dec 2022 at 12:02 PM, Muhammad Tauqeer ***@***.***>
> > > > wrote:
> > > >
> > > > >
> > > > >
> > > > > On Fri, 23 Dec 2022 at 02:15, Dino Farinacci ***@***.***>
> > > > > wrote:
> > > > >
> > > > >> > I have tried the steps you mentioned earlier but still there is
> > > error. I
> > > > >> > mentioned it in the attached folder. Any file I tried, they
> showed
> > > the
> > > > >> same
> > > > >>
> > > > >> I don't see an attachment. Show me what you did from a screen
> shot.
> > > > >>
> > > > >> > error message, I also attached the GoPath and GoRoot. With
> that I
> > > also
> > > > >> > mentioned that where I extract the GO folder which is in
> Home.In Go
> > > > >> folder
> > > > >> > and then src folder I clone the repo which is mentioned. Please
> > > check it
> > > > >> > and let me know where the problem is.
> > > > >>
> > > > >> You do not have to mess with any go stuff. Unless your system
> needs
> > > > >> configuration. Did you read these instructions from the
> build/README
> > > file?
> > > > >>
> > > > >>
> > > > >> You shouldn't have to build it but you need the libraries above.
> > > > >>
> > > > >> Dino
> > > > >>
> > > > >> —
> > > > >> Reply to this email directly, view it on GitHub
> > > > >> <
> > >
> #19 (comment)
> > > >,
> > > > >> or unsubscribe
> > > > >> <
> > >
> https://github.com/notifications/unsubscribe-auth/A2MEFBJ6ZDYIK7FDGPKL2QDWOTAIDANCNFSM6AAAAAATEZ7ZUE
> > > >
> > > > >> .
> > > > >> You are receiving this because you authored the thread.Message
> ID:
> > > > >> ***@***.***>
> > > > >>
> > > > >
> > > > —
> > > > Reply to this email directly, view it on GitHub, or unsubscribe.
> > > > You are receiving this because you commented.
> > > >
> > >
> > > —
> > > Reply to this email directly, view it on GitHub
> > > <
> #19 (comment)
> >,
> > > or unsubscribe
> > > <
> https://github.com/notifications/unsubscribe-auth/A2MEFBIJ7MMJWVRNKUP72PDWO4NE5ANCNFSM6AAAAAATEZ7ZUE
> >
> > > .
> > > You are receiving this because you authored the thread.Message ID:
> > > ***@***.***>
> > >
> > —
> > Reply to this email directly, view it on GitHub, or unsubscribe.
> > You are receiving this because you commented.
> >
>
> —
> Reply to this email directly, view it on GitHub
> <#19 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/A2MEFBOTTHJDGRNLC2OD7HDWO4NQFANCNFSM6AAAAAATEZ7ZUE>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
farinacci commented
***@***.*** or my personal email ***@***.*** Thanks,DinoOn Dec 24, 2022, at 8:13 AM, Tauqeer20 ***@***.***> wrote:
Send me your email that I text you there.
Thanks
On Sat, 24 Dec 2022 at 9:07 PM, Muhammad Tauqeer ***@***.***>
wrote:
Your email is hidden.
On Sat, 24 Dec 2022 at 9:06 PM, Dino Farinacci ***@***.***>
wrote:
> If you can email me the error messages to ***@***.*** that would make it
> simpler. Thanks.
>
> Dino
>
> > On Dec 24, 2022, at 8:04 AM, Tauqeer20 ***@***.***> wrote:
> >
> >
> > Ok, thanks.
> >
> > On Sat, 24 Dec 2022 at 9:03 PM, Dino Farinacci ***@***.***>
> > wrote:
> >
> > > I am reading this from email and haven't seen any error messages. I
> will
> > > have a look on github on Monday.
> > >
> > > Dino
> > >
> > > > On Dec 24, 2022, at 2:21 AM, Tauqeer20 ***@***.***> wrote:
> > > >
> > > >
> > > > Yes I read the build/readme. But still there is error. I mention
> snap
> > > above
> > > > if you are able to see and then tell me whats the problem.
> > > >
> > > > Thanks
> > > >
> > > > On Fri, 23 Dec 2022 at 12:02 PM, Muhammad Tauqeer ***@***.***>
> > > > wrote:
> > > >
> > > > >
> > > > >
> > > > > On Fri, 23 Dec 2022 at 02:15, Dino Farinacci ***@***.***>
> > > > > wrote:
> > > > >
> > > > >> > I have tried the steps you mentioned earlier but still there is
> > > error. I
> > > > >> > mentioned it in the attached folder. Any file I tried, they
> showed
> > > the
> > > > >> same
> > > > >>
> > > > >> I don't see an attachment. Show me what you did from a screen
> shot.
> > > > >>
> > > > >> > error message, I also attached the GoPath and GoRoot. With
> that I
> > > also
> > > > >> > mentioned that where I extract the GO folder which is in
> Home.In Go
> > > > >> folder
> > > > >> > and then src folder I clone the repo which is mentioned. Please
> > > check it
> > > > >> > and let me know where the problem is.
> > > > >>
> > > > >> You do not have to mess with any go stuff. Unless your system
> needs
> > > > >> configuration. Did you read these instructions from the
> build/README
> > > file?
> > > > >>
> > > > >>
> > > > >> You shouldn't have to build it but you need the libraries above.
> > > > >>
> > > > >> Dino
> > > > >>
> > > > >> —
> > > > >> Reply to this email directly, view it on GitHub
> > > > >> <
> > >
> #19 (comment)
> > > >,
> > > > >> or unsubscribe
> > > > >> <
> > >
> https://github.com/notifications/unsubscribe-auth/A2MEFBJ6ZDYIK7FDGPKL2QDWOTAIDANCNFSM6AAAAAATEZ7ZUE
> > > >
> > > > >> .
> > > > >> You are receiving this because you authored the thread.Message
> ID:
> > > > >> ***@***.***>
> > > > >>
> > > > >
> > > > —
> > > > Reply to this email directly, view it on GitHub, or unsubscribe.
> > > > You are receiving this because you commented.
> > > >
> > >
> > > —
> > > Reply to this email directly, view it on GitHub
> > > <
> #19 (comment)
> >,
> > > or unsubscribe
> > > <
> https://github.com/notifications/unsubscribe-auth/A2MEFBIJ7MMJWVRNKUP72PDWO4NE5ANCNFSM6AAAAAATEZ7ZUE
> >
> > > .
> > > You are receiving this because you authored the thread.Message ID:
> > > ***@***.***>
> > >
> > —
> > Reply to this email directly, view it on GitHub, or unsubscribe.
> > You are receiving this because you commented.
> >
>
> —
> Reply to this email directly, view it on GitHub
> <#19 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/A2MEFBOTTHJDGRNLC2OD7HDWO4NQFANCNFSM6AAAAAATEZ7ZUE>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: ***@***.***>
Tauqeer20 commented
Please send a message on this email that I will send you attachement “
***@***.***”.
Thanks
On Sat, 24 Dec 2022 at 11:40 PM, Dino Farinacci ***@***.***>
wrote:
… ***@***.*** or my personal email ***@***.*** Thanks,DinoOn Dec 24, 2022,
at 8:13 AM, Tauqeer20 ***@***.***> wrote:
Send me your email that I text you there.
Thanks
On Sat, 24 Dec 2022 at 9:07 PM, Muhammad Tauqeer ***@***.***>
wrote:
> Your email is hidden.
>
> On Sat, 24 Dec 2022 at 9:06 PM, Dino Farinacci ***@***.***>
> wrote:
>
>> If you can email me the error messages to ***@***.*** that would make it
>> simpler. Thanks.
>>
>> Dino
>>
>> > On Dec 24, 2022, at 8:04 AM, Tauqeer20 ***@***.***> wrote:
>> >
>> >
>> > Ok, thanks.
>> >
>> > On Sat, 24 Dec 2022 at 9:03 PM, Dino Farinacci ***@***.***>
>> > wrote:
>> >
>> > > I am reading this from email and haven't seen any error messages. I
>> will
>> > > have a look on github on Monday.
>> > >
>> > > Dino
>> > >
>> > > > On Dec 24, 2022, at 2:21 AM, Tauqeer20 ***@***.***> wrote:
>> > > >
>> > > >
>> > > > Yes I read the build/readme. But still there is error. I mention
>> snap
>> > > above
>> > > > if you are able to see and then tell me whats the problem.
>> > > >
>> > > > Thanks
>> > > >
>> > > > On Fri, 23 Dec 2022 at 12:02 PM, Muhammad Tauqeer ***@***.***>
>> > > > wrote:
>> > > >
>> > > > >
>> > > > >
>> > > > > On Fri, 23 Dec 2022 at 02:15, Dino Farinacci ***@***.***>
>> > > > > wrote:
>> > > > >
>> > > > >> > I have tried the steps you mentioned earlier but still there
is
>> > > error. I
>> > > > >> > mentioned it in the attached folder. Any file I tried, they
>> showed
>> > > the
>> > > > >> same
>> > > > >>
>> > > > >> I don't see an attachment. Show me what you did from a screen
>> shot.
>> > > > >>
>> > > > >> > error message, I also attached the GoPath and GoRoot. With
>> that I
>> > > also
>> > > > >> > mentioned that where I extract the GO folder which is in
>> Home.In Go
>> > > > >> folder
>> > > > >> > and then src folder I clone the repo which is mentioned.
Please
>> > > check it
>> > > > >> > and let me know where the problem is.
>> > > > >>
>> > > > >> You do not have to mess with any go stuff. Unless your system
>> needs
>> > > > >> configuration. Did you read these instructions from the
>> build/README
>> > > file?
>> > > > >>
>> > > > >>
>> > > > >> You shouldn't have to build it but you need the libraries
above.
>> > > > >>
>> > > > >> Dino
>> > > > >>
>> > > > >> —
>> > > > >> Reply to this email directly, view it on GitHub
>> > > > >> <
>> > >
>>
#19 (comment)
>> > > >,
>> > > > >> or unsubscribe
>> > > > >> <
>> > >
>>
https://github.com/notifications/unsubscribe-auth/A2MEFBJ6ZDYIK7FDGPKL2QDWOTAIDANCNFSM6AAAAAATEZ7ZUE
>> > > >
>> > > > >> .
>> > > > >> You are receiving this because you authored the thread.Message
>> ID:
>> > > > >> ***@***.***>
>> > > > >>
>> > > > >
>> > > > —
>> > > > Reply to this email directly, view it on GitHub, or unsubscribe.
>> > > > You are receiving this because you commented.
>> > > >
>> > >
>> > > —
>> > > Reply to this email directly, view it on GitHub
>> > > <
>>
#19 (comment)
>> >,
>> > > or unsubscribe
>> > > <
>>
https://github.com/notifications/unsubscribe-auth/A2MEFBIJ7MMJWVRNKUP72PDWO4NE5ANCNFSM6AAAAAATEZ7ZUE
>> >
>> > > .
>> > > You are receiving this because you authored the thread.Message ID:
>> > > ***@***.***>
>> > >
>> > —
>> > Reply to this email directly, view it on GitHub, or unsubscribe.
>> > You are receiving this because you commented.
>> >
>>
>> —
>> Reply to this email directly, view it on GitHub
>> <
#19 (comment)
>,
>> or unsubscribe
>> <
https://github.com/notifications/unsubscribe-auth/A2MEFBOTTHJDGRNLC2OD7HDWO4NQFANCNFSM6AAAAAATEZ7ZUE
>
>> .
>> You are receiving this because you authored the thread.Message ID:
>> ***@***.***>
>>
>
—Reply to this email directly, view it on GitHub, or unsubscribe.You are
receiving this because you commented.Message ID: ***@***.***>
—
Reply to this email directly, view it on GitHub
<#19 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2MEFBLQVZAFLNJHVVNNJM3WO47TBANCNFSM6AAAAAATEZ7ZUE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
Tauqeer20 commented
Where to clone the repository.? Is clone in the src of gol folder..?? Or we
can clone anywhere..??
On Sun, 25 Dec 2022 at 12:25 AM, Muhammad Tauqeer ***@***.***>
wrote:
…
Please send a message on this email that I will send you attachement “
***@***.***”.
Thanks
On Sat, 24 Dec 2022 at 11:40 PM, Dino Farinacci ***@***.***>
wrote:
> ***@***.*** or my personal email ***@***.*** Thanks,DinoOn Dec 24, 2022,
> at 8:13 AM, Tauqeer20 ***@***.***> wrote:
> Send me your email that I text you there.
>
> Thanks
>
> On Sat, 24 Dec 2022 at 9:07 PM, Muhammad Tauqeer ***@***.***>
> wrote:
>
> > Your email is hidden.
> >
> > On Sat, 24 Dec 2022 at 9:06 PM, Dino Farinacci ***@***.***>
> > wrote:
> >
> >> If you can email me the error messages to ***@***.*** that would make
> it
> >> simpler. Thanks.
> >>
> >> Dino
> >>
> >> > On Dec 24, 2022, at 8:04 AM, Tauqeer20 ***@***.***> wrote:
> >> >
> >> >
> >> > Ok, thanks.
> >> >
> >> > On Sat, 24 Dec 2022 at 9:03 PM, Dino Farinacci ***@***.***>
> >> > wrote:
> >> >
> >> > > I am reading this from email and haven't seen any error messages. I
> >> will
> >> > > have a look on github on Monday.
> >> > >
> >> > > Dino
> >> > >
> >> > > > On Dec 24, 2022, at 2:21 AM, Tauqeer20 ***@***.***> wrote:
> >> > > >
> >> > > >
> >> > > > Yes I read the build/readme. But still there is error. I mention
> >> snap
> >> > > above
> >> > > > if you are able to see and then tell me whats the problem.
> >> > > >
> >> > > > Thanks
> >> > > >
> >> > > > On Fri, 23 Dec 2022 at 12:02 PM, Muhammad Tauqeer ***@***.***>
> >> > > > wrote:
> >> > > >
> >> > > > >
> >> > > > >
> >> > > > > On Fri, 23 Dec 2022 at 02:15, Dino Farinacci ***@***.***>
> >> > > > > wrote:
> >> > > > >
> >> > > > >> > I have tried the steps you mentioned earlier but still
> there is
> >> > > error. I
> >> > > > >> > mentioned it in the attached folder. Any file I tried, they
> >> showed
> >> > > the
> >> > > > >> same
> >> > > > >>
> >> > > > >> I don't see an attachment. Show me what you did from a screen
> >> shot.
> >> > > > >>
> >> > > > >> > error message, I also attached the GoPath and GoRoot. With
> >> that I
> >> > > also
> >> > > > >> > mentioned that where I extract the GO folder which is in
> >> Home.In Go
> >> > > > >> folder
> >> > > > >> > and then src folder I clone the repo which is mentioned.
> Please
> >> > > check it
> >> > > > >> > and let me know where the problem is.
> >> > > > >>
> >> > > > >> You do not have to mess with any go stuff. Unless your system
> >> needs
> >> > > > >> configuration. Did you read these instructions from the
> >> build/README
> >> > > file?
> >> > > > >>
> >> > > > >>
> >> > > > >> You shouldn't have to build it but you need the libraries
> above.
> >> > > > >>
> >> > > > >> Dino
> >> > > > >>
> >> > > > >> —
> >> > > > >> Reply to this email directly, view it on GitHub
> >> > > > >> <
> >> > >
> >>
> #19 (comment)
> >> > > >,
> >> > > > >> or unsubscribe
> >> > > > >> <
> >> > >
> >>
> https://github.com/notifications/unsubscribe-auth/A2MEFBJ6ZDYIK7FDGPKL2QDWOTAIDANCNFSM6AAAAAATEZ7ZUE
> >> > > >
> >> > > > >> .
> >> > > > >> You are receiving this because you authored the thread.Message
> >> ID:
> >> > > > >> ***@***.***>
> >> > > > >>
> >> > > > >
> >> > > > —
> >> > > > Reply to this email directly, view it on GitHub, or unsubscribe.
> >> > > > You are receiving this because you commented.
> >> > > >
> >> > >
> >> > > —
> >> > > Reply to this email directly, view it on GitHub
> >> > > <
> >>
> #19 (comment)
> >> >,
> >> > > or unsubscribe
> >> > > <
> >>
> https://github.com/notifications/unsubscribe-auth/A2MEFBIJ7MMJWVRNKUP72PDWO4NE5ANCNFSM6AAAAAATEZ7ZUE
> >> >
> >> > > .
> >> > > You are receiving this because you authored the thread.Message ID:
> >> > > ***@***.***>
> >> > >
> >> > —
> >> > Reply to this email directly, view it on GitHub, or unsubscribe.
> >> > You are receiving this because you commented.
> >> >
> >>
> >> —
> >> Reply to this email directly, view it on GitHub
> >> <
> #19 (comment)
> >,
> >> or unsubscribe
> >> <
> https://github.com/notifications/unsubscribe-auth/A2MEFBOTTHJDGRNLC2OD7HDWO4NQFANCNFSM6AAAAAATEZ7ZUE
> >
> >> .
> >> You are receiving this because you authored the thread.Message ID:
> >> ***@***.***>
> >>
> >
>
>
> —Reply to this email directly, view it on GitHub, or unsubscribe.You are
> receiving this because you commented.Message ID: ***@***.***>
>
> —
> Reply to this email directly, view it on GitHub
> <#19 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/A2MEFBLQVZAFLNJHVVNNJM3WO47TBANCNFSM6AAAAAATEZ7ZUE>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
farinacci commented
Sigh github filtering. Check at www.lispers.net where to send support email. DinoOn Dec 24, 2022, at 12:25 PM, Tauqeer20 ***@***.***> wrote:
Where to clone the repository.? Is clone in the src of gol folder..?? Or we
can clone anywhere..??
On Sun, 25 Dec 2022 at 12:25 AM, Muhammad Tauqeer ***@***.***>
wrote:
Please send a message on this email that I will send you attachement “
***@***.***”.
Thanks
On Sat, 24 Dec 2022 at 11:40 PM, Dino Farinacci ***@***.***>
wrote:
> ***@***.*** or my personal email ***@***.*** Thanks,DinoOn Dec 24, 2022,
> at 8:13 AM, Tauqeer20 ***@***.***> wrote:
> Send me your email that I text you there.
>
> Thanks
>
> On Sat, 24 Dec 2022 at 9:07 PM, Muhammad Tauqeer ***@***.***>
> wrote:
>
> > Your email is hidden.
> >
> > On Sat, 24 Dec 2022 at 9:06 PM, Dino Farinacci ***@***.***>
> > wrote:
> >
> >> If you can email me the error messages to ***@***.*** that would make
> it
> >> simpler. Thanks.
> >>
> >> Dino
> >>
> >> > On Dec 24, 2022, at 8:04 AM, Tauqeer20 ***@***.***> wrote:
> >> >
> >> >
> >> > Ok, thanks.
> >> >
> >> > On Sat, 24 Dec 2022 at 9:03 PM, Dino Farinacci ***@***.***>
> >> > wrote:
> >> >
> >> > > I am reading this from email and haven't seen any error messages. I
> >> will
> >> > > have a look on github on Monday.
> >> > >
> >> > > Dino
> >> > >
> >> > > > On Dec 24, 2022, at 2:21 AM, Tauqeer20 ***@***.***> wrote:
> >> > > >
> >> > > >
> >> > > > Yes I read the build/readme. But still there is error. I mention
> >> snap
> >> > > above
> >> > > > if you are able to see and then tell me whats the problem.
> >> > > >
> >> > > > Thanks
> >> > > >
> >> > > > On Fri, 23 Dec 2022 at 12:02 PM, Muhammad Tauqeer ***@***.***>
> >> > > > wrote:
> >> > > >
> >> > > > >
> >> > > > >
> >> > > > > On Fri, 23 Dec 2022 at 02:15, Dino Farinacci ***@***.***>
> >> > > > > wrote:
> >> > > > >
> >> > > > >> > I have tried the steps you mentioned earlier but still
> there is
> >> > > error. I
> >> > > > >> > mentioned it in the attached folder. Any file I tried, they
> >> showed
> >> > > the
> >> > > > >> same
> >> > > > >>
> >> > > > >> I don't see an attachment. Show me what you did from a screen
> >> shot.
> >> > > > >>
> >> > > > >> > error message, I also attached the GoPath and GoRoot. With
> >> that I
> >> > > also
> >> > > > >> > mentioned that where I extract the GO folder which is in
> >> Home.In Go
> >> > > > >> folder
> >> > > > >> > and then src folder I clone the repo which is mentioned.
> Please
> >> > > check it
> >> > > > >> > and let me know where the problem is.
> >> > > > >>
> >> > > > >> You do not have to mess with any go stuff. Unless your system
> >> needs
> >> > > > >> configuration. Did you read these instructions from the
> >> build/README
> >> > > file?
> >> > > > >>
> >> > > > >>
> >> > > > >> You shouldn't have to build it but you need the libraries
> above.
> >> > > > >>
> >> > > > >> Dino
> >> > > > >>
> >> > > > >> —
> >> > > > >> Reply to this email directly, view it on GitHub
> >> > > > >> <
> >> > >
> >>
> #19 (comment)
> >> > > >,
> >> > > > >> or unsubscribe
> >> > > > >> <
> >> > >
> >>
> https://github.com/notifications/unsubscribe-auth/A2MEFBJ6ZDYIK7FDGPKL2QDWOTAIDANCNFSM6AAAAAATEZ7ZUE
> >> > > >
> >> > > > >> .
> >> > > > >> You are receiving this because you authored the thread.Message
> >> ID:
> >> > > > >> ***@***.***>
> >> > > > >>
> >> > > > >
> >> > > > —
> >> > > > Reply to this email directly, view it on GitHub, or unsubscribe.
> >> > > > You are receiving this because you commented.
> >> > > >
> >> > >
> >> > > —
> >> > > Reply to this email directly, view it on GitHub
> >> > > <
> >>
> #19 (comment)
> >> >,
> >> > > or unsubscribe
> >> > > <
> >>
> https://github.com/notifications/unsubscribe-auth/A2MEFBIJ7MMJWVRNKUP72PDWO4NE5ANCNFSM6AAAAAATEZ7ZUE
> >> >
> >> > > .
> >> > > You are receiving this because you authored the thread.Message ID:
> >> > > ***@***.***>
> >> > >
> >> > —
> >> > Reply to this email directly, view it on GitHub, or unsubscribe.
> >> > You are receiving this because you commented.
> >> >
> >>
> >> —
> >> Reply to this email directly, view it on GitHub
> >> <
> #19 (comment)
> >,
> >> or unsubscribe
> >> <
> https://github.com/notifications/unsubscribe-auth/A2MEFBOTTHJDGRNLC2OD7HDWO4NQFANCNFSM6AAAAAATEZ7ZUE
> >
> >> .
> >> You are receiving this because you authored the thread.Message ID:
> >> ***@***.***>
> >>
> >
>
>
> —Reply to this email directly, view it on GitHub, or unsubscribe.You are
> receiving this because you commented.Message ID: ***@***.***>
>
> —
> Reply to this email directly, view it on GitHub
> <#19 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/A2MEFBLQVZAFLNJHVVNNJM3WO47TBANCNFSM6AAAAAATEZ7ZUE>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: ***@***.***>
Tauqeer20 commented
What do you mean?
On Sun, 25 Dec 2022 at 02:02, Dino Farinacci ***@***.***>
wrote:
… Sigh github filtering. Check at www.lispers.net where to send support
email. DinoOn Dec 24, 2022, at 12:25 PM, Tauqeer20 ***@***.***> wrote:
Where to clone the repository.? Is clone in the src of gol folder..?? Or we
can clone anywhere..??
On Sun, 25 Dec 2022 at 12:25 AM, Muhammad Tauqeer ***@***.***>
wrote:
>
> Please send a message on this email that I will send you attachement “
> ***@***.***”.
>
> Thanks
> On Sat, 24 Dec 2022 at 11:40 PM, Dino Farinacci ***@***.***>
> wrote:
>
>> ***@***.*** or my personal email ***@***.*** Thanks,DinoOn Dec 24, 2022,
>> at 8:13 AM, Tauqeer20 ***@***.***> wrote:
>> Send me your email that I text you there.
>>
>> Thanks
>>
>> On Sat, 24 Dec 2022 at 9:07 PM, Muhammad Tauqeer ***@***.***>
>> wrote:
>>
>> > Your email is hidden.
>> >
>> > On Sat, 24 Dec 2022 at 9:06 PM, Dino Farinacci ***@***.***>
>> > wrote:
>> >
>> >> If you can email me the error messages to ***@***.*** that would make
>> it
>> >> simpler. Thanks.
>> >>
>> >> Dino
>> >>
>> >> > On Dec 24, 2022, at 8:04 AM, Tauqeer20 ***@***.***> wrote:
>> >> >
>> >> >
>> >> > Ok, thanks.
>> >> >
>> >> > On Sat, 24 Dec 2022 at 9:03 PM, Dino Farinacci ***@***.***>
>> >> > wrote:
>> >> >
>> >> > > I am reading this from email and haven't seen any error
messages. I
>> >> will
>> >> > > have a look on github on Monday.
>> >> > >
>> >> > > Dino
>> >> > >
>> >> > > > On Dec 24, 2022, at 2:21 AM, Tauqeer20 ***@***.***> wrote:
>> >> > > >
>> >> > > >
>> >> > > > Yes I read the build/readme. But still there is error. I
mention
>> >> snap
>> >> > > above
>> >> > > > if you are able to see and then tell me whats the problem.
>> >> > > >
>> >> > > > Thanks
>> >> > > >
>> >> > > > On Fri, 23 Dec 2022 at 12:02 PM, Muhammad Tauqeer ***@***.***>
>> >> > > > wrote:
>> >> > > >
>> >> > > > >
>> >> > > > >
>> >> > > > > On Fri, 23 Dec 2022 at 02:15, Dino Farinacci ***@***.***>
>> >> > > > > wrote:
>> >> > > > >
>> >> > > > >> > I have tried the steps you mentioned earlier but still
>> there is
>> >> > > error. I
>> >> > > > >> > mentioned it in the attached folder. Any file I tried,
they
>> >> showed
>> >> > > the
>> >> > > > >> same
>> >> > > > >>
>> >> > > > >> I don't see an attachment. Show me what you did from a
screen
>> >> shot.
>> >> > > > >>
>> >> > > > >> > error message, I also attached the GoPath and GoRoot. With
>> >> that I
>> >> > > also
>> >> > > > >> > mentioned that where I extract the GO folder which is in
>> >> Home.In Go
>> >> > > > >> folder
>> >> > > > >> > and then src folder I clone the repo which is mentioned.
>> Please
>> >> > > check it
>> >> > > > >> > and let me know where the problem is.
>> >> > > > >>
>> >> > > > >> You do not have to mess with any go stuff. Unless your
system
>> >> needs
>> >> > > > >> configuration. Did you read these instructions from the
>> >> build/README
>> >> > > file?
>> >> > > > >>
>> >> > > > >>
>> >> > > > >> You shouldn't have to build it but you need the libraries
>> above.
>> >> > > > >>
>> >> > > > >> Dino
>> >> > > > >>
>> >> > > > >> —
>> >> > > > >> Reply to this email directly, view it on GitHub
>> >> > > > >> <
>> >> > >
>> >>
>>
#19 (comment)
>> >> > > >,
>> >> > > > >> or unsubscribe
>> >> > > > >> <
>> >> > >
>> >>
>>
https://github.com/notifications/unsubscribe-auth/A2MEFBJ6ZDYIK7FDGPKL2QDWOTAIDANCNFSM6AAAAAATEZ7ZUE
>> >> > > >
>> >> > > > >> .
>> >> > > > >> You are receiving this because you authored the
thread.Message
>> >> ID:
>> >> > > > >> ***@***.***>
>> >> > > > >>
>> >> > > > >
>> >> > > > —
>> >> > > > Reply to this email directly, view it on GitHub, or
unsubscribe.
>> >> > > > You are receiving this because you commented.
>> >> > > >
>> >> > >
>> >> > > —
>> >> > > Reply to this email directly, view it on GitHub
>> >> > > <
>> >>
>>
#19 (comment)
>> >> >,
>> >> > > or unsubscribe
>> >> > > <
>> >>
>>
https://github.com/notifications/unsubscribe-auth/A2MEFBIJ7MMJWVRNKUP72PDWO4NE5ANCNFSM6AAAAAATEZ7ZUE
>> >> >
>> >> > > .
>> >> > > You are receiving this because you authored the thread.Message
ID:
>> >> > > ***@***.***>
>> >> > >
>> >> > —
>> >> > Reply to this email directly, view it on GitHub, or unsubscribe.
>> >> > You are receiving this because you commented.
>> >> >
>> >>
>> >> —
>> >> Reply to this email directly, view it on GitHub
>> >> <
>>
#19 (comment)
>> >,
>> >> or unsubscribe
>> >> <
>>
https://github.com/notifications/unsubscribe-auth/A2MEFBOTTHJDGRNLC2OD7HDWO4NQFANCNFSM6AAAAAATEZ7ZUE
>> >
>> >> .
>> >> You are receiving this because you authored the thread.Message ID:
>> >> ***@***.***>
>> >>
>> >
>>
>>
>> —Reply to this email directly, view it on GitHub, or unsubscribe.You are
>> receiving this because you commented.Message ID: ***@***.***>
>>
>> —
>> Reply to this email directly, view it on GitHub
>> <
#19 (comment)
>,
>> or unsubscribe
>> <
https://github.com/notifications/unsubscribe-auth/A2MEFBLQVZAFLNJHVVNNJM3WO47TBANCNFSM6AAAAAATEZ7ZUE
>
>> .
>> You are receiving this because you authored the thread.Message ID:
>> ***@***.***>
>>
>
—Reply to this email directly, view it on GitHub, or unsubscribe.You are
receiving this because you commented.Message ID: ***@***.***>
—
Reply to this email directly, view it on GitHub
<#19 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2MEFBI3SNSV2I2P5XFUF2DWO5QF5ANCNFSM6AAAAAATEZ7ZUE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
farinacci commented
Where to clone the repository.? Is clone in the src of gol folder..?? Or we
can clone anywhere..??Anywhere you like but you would need build a release. I suggest you use my builds. Just use this on the system you want to run it on. lispers.net-x86-release-0.585.tgzdropbox.comOr here is a docker image with everything pre installed. lispers.net-0.585-ubuntu-docker-imagedropbox.comI suggest you use the docker image and the lisp-xtr go binary will just work. Dino
On Sun, 25 Dec 2022 at 12:25 AM, Muhammad Tauqeer ***@***.***>
wrote:
Please send a message on this email that I will send you attachement “
***@***.***”.
Thanks
On Sat, 24 Dec 2022 at 11:40 PM, Dino Farinacci ***@***.***>
wrote:
> ***@***.*** or my personal email ***@***.*** Thanks,DinoOn Dec 24, 2022,
> at 8:13 AM, Tauqeer20 ***@***.***> wrote:
> Send me your email that I text you there.
>
> Thanks
>
> On Sat, 24 Dec 2022 at 9:07 PM, Muhammad Tauqeer ***@***.***>
> wrote:
>
> > Your email is hidden.
> >
> > On Sat, 24 Dec 2022 at 9:06 PM, Dino Farinacci ***@***.***>
> > wrote:
> >
> >> If you can email me the error messages to ***@***.*** that would make
> it
> >> simpler. Thanks.
> >>
> >> Dino
> >>
> >> > On Dec 24, 2022, at 8:04 AM, Tauqeer20 ***@***.***> wrote:
> >> >
> >> >
> >> > Ok, thanks.
> >> >
> >> > On Sat, 24 Dec 2022 at 9:03 PM, Dino Farinacci ***@***.***>
> >> > wrote:
> >> >
> >> > > I am reading this from email and haven't seen any error messages. I
> >> will
> >> > > have a look on github on Monday.
> >> > >
> >> > > Dino
> >> > >
> >> > > > On Dec 24, 2022, at 2:21 AM, Tauqeer20 ***@***.***> wrote:
> >> > > >
> >> > > >
> >> > > > Yes I read the build/readme. But still there is error. I mention
> >> snap
> >> > > above
> >> > > > if you are able to see and then tell me whats the problem.
> >> > > >
> >> > > > Thanks
> >> > > >
> >> > > > On Fri, 23 Dec 2022 at 12:02 PM, Muhammad Tauqeer ***@***.***>
> >> > > > wrote:
> >> > > >
> >> > > > >
> >> > > > >
> >> > > > > On Fri, 23 Dec 2022 at 02:15, Dino Farinacci ***@***.***>
> >> > > > > wrote:
> >> > > > >
> >> > > > >> > I have tried the steps you mentioned earlier but still
> there is
> >> > > error. I
> >> > > > >> > mentioned it in the attached folder. Any file I tried, they
> >> showed
> >> > > the
> >> > > > >> same
> >> > > > >>
> >> > > > >> I don't see an attachment. Show me what you did from a screen
> >> shot.
> >> > > > >>
> >> > > > >> > error message, I also attached the GoPath and GoRoot. With
> >> that I
> >> > > also
> >> > > > >> > mentioned that where I extract the GO folder which is in
> >> Home.In Go
> >> > > > >> folder
> >> > > > >> > and then src folder I clone the repo which is mentioned.
> Please
> >> > > check it
> >> > > > >> > and let me know where the problem is.
> >> > > > >>
> >> > > > >> You do not have to mess with any go stuff. Unless your system
> >> needs
> >> > > > >> configuration. Did you read these instructions from the
> >> build/README
> >> > > file?
> >> > > > >>
> >> > > > >>
> >> > > > >> You shouldn't have to build it but you need the libraries
> above.
> >> > > > >>
> >> > > > >> Dino
> >> > > > >>
> >> > > > >> —
> >> > > > >> Reply to this email directly, view it on GitHub
> >> > > > >> <
> >> > >
> >>
> #19 (comment)
> >> > > >,
> >> > > > >> or unsubscribe
> >> > > > >> <
> >> > >
> >>
> https://github.com/notifications/unsubscribe-auth/A2MEFBJ6ZDYIK7FDGPKL2QDWOTAIDANCNFSM6AAAAAATEZ7ZUE
> >> > > >
> >> > > > >> .
> >> > > > >> You are receiving this because you authored the thread.Message
> >> ID:
> >> > > > >> ***@***.***>
> >> > > > >>
> >> > > > >
> >> > > > —
> >> > > > Reply to this email directly, view it on GitHub, or unsubscribe.
> >> > > > You are receiving this because you commented.
> >> > > >
> >> > >
> >> > > —
> >> > > Reply to this email directly, view it on GitHub
> >> > > <
> >>
> #19 (comment)
> >> >,
> >> > > or unsubscribe
> >> > > <
> >>
> https://github.com/notifications/unsubscribe-auth/A2MEFBIJ7MMJWVRNKUP72PDWO4NE5ANCNFSM6AAAAAATEZ7ZUE
> >> >
> >> > > .
> >> > > You are receiving this because you authored the thread.Message ID:
> >> > > ***@***.***>
> >> > >
> >> > —
> >> > Reply to this email directly, view it on GitHub, or unsubscribe.
> >> > You are receiving this because you commented.
> >> >
> >>
> >> —
> >> Reply to this email directly, view it on GitHub
> >> <
> #19 (comment)
> >,
> >> or unsubscribe
> >> <
> https://github.com/notifications/unsubscribe-auth/A2MEFBOTTHJDGRNLC2OD7HDWO4NQFANCNFSM6AAAAAATEZ7ZUE
> >
> >> .
> >> You are receiving this because you authored the thread.Message ID:
> >> ***@***.***>
> >>
> >
>
>
> —Reply to this email directly, view it on GitHub, or unsubscribe.You are
> receiving this because you commented.Message ID: ***@***.***>
>
> —
> Reply to this email directly, view it on GitHub
> <#19 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/A2MEFBLQVZAFLNJHVVNNJM3WO47TBANCNFSM6AAAAAATEZ7ZUE>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: ***@***.***>
Tauqeer20 commented
Still not getting your point. Can we chane in the build file??
On Sun, 25 Dec 2022 at 02:06, Dino Farinacci ***@***.***>
wrote:
… Where to clone the repository.? Is clone in the src of gol folder..?? Or we
can clone anywhere..??Anywhere you like but you would need build a
release. I suggest you use my builds. Just use this on the system you want
to run it on. lispers.net-x86-release-0.585.tgzdropbox.comOr here is a
docker image with everything pre
installed. lispers.net-0.585-ubuntu-docker-imagedropbox.comI suggest you
use the docker image and the lisp-xtr go binary will just work. Dino
On Sun, 25 Dec 2022 at 12:25 AM, Muhammad Tauqeer ***@***.***>
wrote:
>
> Please send a message on this email that I will send you attachement “
> ***@***.***”.
>
> Thanks
> On Sat, 24 Dec 2022 at 11:40 PM, Dino Farinacci ***@***.***>
> wrote:
>
>> ***@***.*** or my personal email ***@***.*** Thanks,DinoOn Dec 24, 2022,
>> at 8:13 AM, Tauqeer20 ***@***.***> wrote:
>> Send me your email that I text you there.
>>
>> Thanks
>>
>> On Sat, 24 Dec 2022 at 9:07 PM, Muhammad Tauqeer ***@***.***>
>> wrote:
>>
>> > Your email is hidden.
>> >
>> > On Sat, 24 Dec 2022 at 9:06 PM, Dino Farinacci ***@***.***>
>> > wrote:
>> >
>> >> If you can email me the error messages to ***@***.*** that would make
>> it
>> >> simpler. Thanks.
>> >>
>> >> Dino
>> >>
>> >> > On Dec 24, 2022, at 8:04 AM, Tauqeer20 ***@***.***> wrote:
>> >> >
>> >> >
>> >> > Ok, thanks.
>> >> >
>> >> > On Sat, 24 Dec 2022 at 9:03 PM, Dino Farinacci ***@***.***>
>> >> > wrote:
>> >> >
>> >> > > I am reading this from email and haven't seen any error
messages. I
>> >> will
>> >> > > have a look on github on Monday.
>> >> > >
>> >> > > Dino
>> >> > >
>> >> > > > On Dec 24, 2022, at 2:21 AM, Tauqeer20 ***@***.***> wrote:
>> >> > > >
>> >> > > >
>> >> > > > Yes I read the build/readme. But still there is error. I
mention
>> >> snap
>> >> > > above
>> >> > > > if you are able to see and then tell me whats the problem.
>> >> > > >
>> >> > > > Thanks
>> >> > > >
>> >> > > > On Fri, 23 Dec 2022 at 12:02 PM, Muhammad Tauqeer ***@***.***>
>> >> > > > wrote:
>> >> > > >
>> >> > > > >
>> >> > > > >
>> >> > > > > On Fri, 23 Dec 2022 at 02:15, Dino Farinacci ***@***.***>
>> >> > > > > wrote:
>> >> > > > >
>> >> > > > >> > I have tried the steps you mentioned earlier but still
>> there is
>> >> > > error. I
>> >> > > > >> > mentioned it in the attached folder. Any file I tried,
they
>> >> showed
>> >> > > the
>> >> > > > >> same
>> >> > > > >>
>> >> > > > >> I don't see an attachment. Show me what you did from a
screen
>> >> shot.
>> >> > > > >>
>> >> > > > >> > error message, I also attached the GoPath and GoRoot. With
>> >> that I
>> >> > > also
>> >> > > > >> > mentioned that where I extract the GO folder which is in
>> >> Home.In Go
>> >> > > > >> folder
>> >> > > > >> > and then src folder I clone the repo which is mentioned.
>> Please
>> >> > > check it
>> >> > > > >> > and let me know where the problem is.
>> >> > > > >>
>> >> > > > >> You do not have to mess with any go stuff. Unless your
system
>> >> needs
>> >> > > > >> configuration. Did you read these instructions from the
>> >> build/README
>> >> > > file?
>> >> > > > >>
>> >> > > > >>
>> >> > > > >> You shouldn't have to build it but you need the libraries
>> above.
>> >> > > > >>
>> >> > > > >> Dino
>> >> > > > >>
>> >> > > > >> —
>> >> > > > >> Reply to this email directly, view it on GitHub
>> >> > > > >> <
>> >> > >
>> >>
>>
#19 (comment)
>> >> > > >,
>> >> > > > >> or unsubscribe
>> >> > > > >> <
>> >> > >
>> >>
>>
https://github.com/notifications/unsubscribe-auth/A2MEFBJ6ZDYIK7FDGPKL2QDWOTAIDANCNFSM6AAAAAATEZ7ZUE
>> >> > > >
>> >> > > > >> .
>> >> > > > >> You are receiving this because you authored the
thread.Message
>> >> ID:
>> >> > > > >> ***@***.***>
>> >> > > > >>
>> >> > > > >
>> >> > > > —
>> >> > > > Reply to this email directly, view it on GitHub, or
unsubscribe.
>> >> > > > You are receiving this because you commented.
>> >> > > >
>> >> > >
>> >> > > —
>> >> > > Reply to this email directly, view it on GitHub
>> >> > > <
>> >>
>>
#19 (comment)
>> >> >,
>> >> > > or unsubscribe
>> >> > > <
>> >>
>>
https://github.com/notifications/unsubscribe-auth/A2MEFBIJ7MMJWVRNKUP72PDWO4NE5ANCNFSM6AAAAAATEZ7ZUE
>> >> >
>> >> > > .
>> >> > > You are receiving this because you authored the thread.Message
ID:
>> >> > > ***@***.***>
>> >> > >
>> >> > —
>> >> > Reply to this email directly, view it on GitHub, or unsubscribe.
>> >> > You are receiving this because you commented.
>> >> >
>> >>
>> >> —
>> >> Reply to this email directly, view it on GitHub
>> >> <
>>
#19 (comment)
>> >,
>> >> or unsubscribe
>> >> <
>>
https://github.com/notifications/unsubscribe-auth/A2MEFBOTTHJDGRNLC2OD7HDWO4NQFANCNFSM6AAAAAATEZ7ZUE
>> >
>> >> .
>> >> You are receiving this because you authored the thread.Message ID:
>> >> ***@***.***>
>> >>
>> >
>>
>>
>> —Reply to this email directly, view it on GitHub, or unsubscribe.You are
>> receiving this because you commented.Message ID: ***@***.***>
>>
>> —
>> Reply to this email directly, view it on GitHub
>> <
#19 (comment)
>,
>> or unsubscribe
>> <
https://github.com/notifications/unsubscribe-auth/A2MEFBLQVZAFLNJHVVNNJM3WO47TBANCNFSM6AAAAAATEZ7ZUE
>
>> .
>> You are receiving this because you authored the thread.Message ID:
>> ***@***.***>
>>
>
—Reply to this email directly, view it on GitHub, or unsubscribe.You are
receiving this because you commented.Message ID: ***@***.***>
—
Reply to this email directly, view it on GitHub
<#19 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2MEFBIVTFA346PXLUSZ2MDWO5QVRANCNFSM6AAAAAATEZ7ZUE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
farinacci commented
What do you mean?
Each time you include an email address in a git issues post, they star out the email address to protect user privacy.
Lets see if this works, send email to:
support at lispers.net
Dino
farinacci commented
Looks like it did. But the fastest way to issue resolution is to use my docker image.
Tauqeer20 commented
Lets try this “mdtouqeer1996”.
Please with this write @ and gmail and .com
…On Sun, 25 Dec 2022 at 2:10 AM, Dino Farinacci ***@***.***> wrote:
Looks like it did. But the fastest way to issue resolution is to use my
docker image.
—
Reply to this email directly, view it on GitHub
<#19 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2MEFBMJFMGQW53GOR3ZNALWO5REHANCNFSM6AAAAAATEZ7ZUE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
Tauqeer20 commented
Hopefully this works.
On Sun, 25 Dec 2022 at 2:16 AM, Muhammad Tauqeer ***@***.***>
wrote:
… Lets try this “mdtouqeer1996”.
Please with this write @ and gmail and .com
On Sun, 25 Dec 2022 at 2:10 AM, Dino Farinacci ***@***.***>
wrote:
> Looks like it did. But the fastest way to issue resolution is to use my
> docker image.
>
> —
> Reply to this email directly, view it on GitHub
> <#19 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/A2MEFBMJFMGQW53GOR3ZNALWO5REHANCNFSM6AAAAAATEZ7ZUE>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
farinacci commented
You can clone the repo, if you simply want a local copy. But you do not have to clone it if you want to run it. You can use the releases in the build/releases directory or download the tarball OR docker image. The tarball is in the docker image untar'ed and ready to run. If you bring up a docker container, the lispers.net code will just come up.
If you want to run the faster go data-plane, then modify the line I said in the RUN-LISP script.
So take these steps (its the easiest way):
(1) Download the docker image, type "docker load ".
(2) Run:
docker run -p 8080 --privileged --name -h -v :/hostOS -ti lispers.net/ubuntu
(3) When you docker attach and type "pslisp" you'll see LISP running.
(4) Modify your RUN-LISP script, then type "RESTART-LISP".
(5) You'll need to configure xTR functionality in lisp.config. Depending on what you are trying to do and configure, grab the docs/lisp.config.xtr or docs/lisp.config.xtr-nat (you are probably going to run the xTR behind a NAT/firewall device).
farinacci commented
I'm reading this issue list from git instead of email. I saw your first post. You cannot compile the lisp go code that way. You have to check how make-release.py does it. But I don't recommend it because I did not design the install process for users to build and compile the go data-plane. The go binary is in file lisp-xtr and ready to be executed.
farinacci commented
Here is another pointer to the docker image:
https://www.dropbox.com/s/629guvr79vy8dz0/lispers.net-0.585-ubuntu-docker-image
Thanks for testing,
Dino
Tauqeer20 commented
Thanks, I'll check it out.
I want to run the lisp file and they give me results of sending and
receiving msgs. I just want to run the file correctly that it give me
results thats so far I was unable to run the
…On Sun, 25 Dec 2022 at 2:18 AM, Dino Farinacci ***@***.***> wrote:
You can clone the repo, if you simply want a local copy. But you do not
have to clone it if you want to run it. You can use the releases in the
build/releases directory or download the tarball OR docker image. The
tarball is in the docker image untar'ed and ready to run. If you bring up a
docker container, the lispers.net code will just come up.
If you want to run the faster go data-plane, then modify the line I said
in the RUN-LISP script.
So take these steps (its the easiest way):
(1) Download the docker image, type "docker load ".
(2) Run:
docker run -p 8080 --privileged --name -h -v :/hostOS -ti
lispers.net/ubuntu
(3) When you docker attach and type "pslisp" you'll see LISP running.
(4) Modify your RUN-LISP script, then type "RESTART-LISP".
(5) You'll need to configure xTR functionality in lisp.config. Depending
on what you are trying to do and configure, grab the docs/lisp.config.xtr
or docs/lisp.config.xtr-nat (you are probably going to run the xTR behind a
NAT/firewall device).
—
Reply to this email directly, view it on GitHub
<#19 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2MEFBNMM3FBK6T4BCL52IDWO5SBZANCNFSM6AAAAAATEZ7ZUE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>