Tested same record config as NOAA
SA7BNT opened this issue · 5 comments
Hey,
i should recommend to use the same recording config (noaa.sh) for ISS record.
Tested in the morning and was a working great.
20181029-0542_ISS-SSTV.mp3.zip
Congratulations on the nice SSTV image! 👍
I don't fully understand what config do you mean? Could you please send the config you used for that?
Which software did you use for the mp3 to image conversion?
I was just running the noaa.sh instead of the iss_voice.sh in the autowx2_config.py
See pic below
I did not convert to MP3. Took the wav from the noaa rec. map and run it in Multiscan 3B SSTV
https://www.qsl.net/kd6cji/
Was working absolutely great for me.
Unfortunately I live too far in the north and did not have a good elevation angle.
Here is one more ok pic. with ca 20 degree elevation.
Ok, so then it depends on what you are trying to achieve. For recording of voice transmission, I would stay with mp3. For further decoding, like SSTV, wav is better. I will try to modify iss.sh
to give these two options.