Missing components in BOM
Closed this issue · 1 comments
Many components in the schematic of the master board TI TMS570LC4357 Master v1.1.1 are present in the PCB layout but not in the BOM.
These missing components are cross-marked in the schematics for example: In the buck-boost-converter.SchDoc
Dear @Shrisha-Balkur,
The foxBMS 2 master PCB design includes different component variants (also known as placement options). In the “default” variant, some parts of the schematic are not used and therefore marked with a red cross in the schematic. In the case of the buck-boost-converter the converter is bypassed by placing the resistor R7115, while the remaining components are not soldered to the PCB. The reason for doing this are diverse: The buck-boost converter IC for example is currently not available.
Best regards,
The foxBMS Team