sensor.zonneplan_current_usage Shows 0

Question

sensor.zonneplan_current_usage Shows 0

Closed this issue 4 months ago · 9 comments

The sensor “sensor.zonneplan_current_usage“ shows 0, while the other sensors do show data which correlates to the Zonneplan app. Is some additional device needed for this sensor to show data?

i have a contract with zonneplan and have their dongle connected to the P1 port. The zonneplan app shows valid data.

Answer 1 · 2024-06-11T16:54:53.000Z

This is the Current electricity usage, a value that (was) available when you have a energy contract with Zonneplan

Answer 2 · 2024-06-11T17:14:17.000Z

Uhm, but I do have an energy contract with Zonneplan. I also wrote this in my post.

Answer 3 · 2024-06-11T18:01:19.000Z

I don't 🙂

So I'm not able to validate if the value is still part of the API.

Maybe you can share some debug logging then I can check the data

Answer 4 · 2024-06-11T18:13:22.000Z

if you're only interested in energy prices, there are many other options including:

Answer 5 · 2024-06-11T18:43:57.000Z

I’ll get a Homewizard to log current power consumption.

Answer 6 · 2024-06-11T18:46:17.000Z

@StSaens did you receive a P1 meter from Zonneplan?

Answer 7 · 2024-06-11T18:51:38.000Z

Jup. It’s plugged in and the Zonneplan app shows me current power / gas consumption. As well as hourly, daily etc.

Answer 8 · 2024-06-11T18:54:13.000Z

okay, can confirm it's still working here:

Does reloading the integration help?

Answer 9 · 2024-06-11T19:14:27.000Z

Deleted and re-installed the integration. See img. below.
Nothing in the logs either.

I think the tops rows show some recent usage averaged over time. A homewizard should give me (near) real-time usage and per phase too. So I’ll go that way.