gbmhunter/CppLinuxSerial

Issues

• I want use this lib for 485，but I don't konw how to control the state

  #51 opened 3 months ago by VarianSikovsky
  0

• bad address std::system_error

  #50 opened 6 months ago by qasidaleem
  2

• enum class error. :(

  #45 opened 9 months ago by sFaster
  1

• Reading a huge data flow

  #42 opened a year ago by maxim133
  1

• "cannot open source file ioctls.h and termbits.h"

  #27 opened 3 years ago by nuclearcodecat
  2

• Get a lock on the serial port.

  #36 opened a year ago by octo-vaibhav
  1

• Opening serial port feedback

  #37 opened 2 years ago by SaeedAID
  3

• stop bit and Parity

  #20 opened 2 years ago by RamatovInomjon
  2

• Install Problem

  #19 opened 2 years ago by ABeginnerThomas
  2

• Send HEX commands over Serial

  #15 opened 2 years ago by thhilt
  6

• To install

  #10 opened 2 years ago by sy-project
  3

• i cant open serial port

  #13 opened 2 years ago by sy-project
  3

• read timeout and eof are indistinguishable

  #32 opened 2 years ago by aldoshkind
  2

• Help

  #31 opened 2 years ago by wwhai
  0

• Read data from Arduino is wrong

  #29 opened 2 years ago by Chao-Shun-Cheng
  2

• googletest was failed

  #30 opened 2 years ago by viaSeunghyun
  2

• Flush write buffer

  #21 opened 3 years ago by SanderEveraers
  1

• In binary mode fails because sometimes the ioctl does not complete fast enough?

  #25 opened 3 years ago by esteimle
  1

• Reading data

  #26 opened 3 years ago by IrinaKhandogiy
  1

• Problem cloning the `googletest`

  #18 opened 3 years ago by LRDPRDX
  1

• Support for "disable auto reset on connect"

  #11 opened 4 years ago by doleron
  1

• Can I use this header for usb relay board?

  #12 opened 4 years ago by sy-project
  2

• issue with arm systems

  #9 opened 4 years ago by wima88
  2

• MacOS

  #8 opened 4 years ago by dupuysylvain
  3

• How to custom baud rate?

  #7 opened 4 years ago by KTOC
  3

• Tutorial

  #5 opened 4 years ago by sinasartip
  1

• state == OPEN when trying to set the timeout before the open call

  #2 opened 4 years ago by CodeFatherG
  4

• make/build

  #3 opened 4 years ago by arblake
  2

• No license information available

  #1 opened 6 years ago by petmos
  1