github/training-kit

pappu

Akbar0333 opened this issue · 2 comments

Akbar0333 commented
pappu
Akbar0333 commented

#include <EEPROM.h>
#include <SoftwareSerial.h>
SoftwareSerial bt(0,2);
String inputs;

#define stop A0//0push
#define start A1//0push
#define on A2
#define off A3
#define Send A5//outpt waire
int value = A5; //moter reding waire
//newturn pins 4 7 10
int values=0,sete=0;

#define bling 10//mode
#define Relay1 6//mode led

#define bazar 8 //bazar
#define r2 9 //timer start send > A4
#define moter 11 //on relay man time
#define r1 11 //on relay man time
#define r3 12 //off relay
#define dipar 13 //dipar

int re1 = 0,re2 = 0,re3 = 0,time=0;

int Load = 0, Mode=0;
int de=0,count=0,mm=0,ss=0,hh=0,timer=0;

void setup() {
bt.begin(9600);
Serial.begin(9600);

digitalWrite(moter,LOW);
pinMode(dipar, OUTPUT);
pinMode(bazar, OUTPUT);
pinMode(moter, OUTPUT);

digitalWrite(moter,LOW);
pinMode(Relay1, OUTPUT);
pinMode(bling, OUTPUT);
pinMode(r1, OUTPUT);
pinMode(r2, OUTPUT);
pinMode(r3, OUTPUT);
pinMode(start, INPUT_PULLUP);
pinMode(stop, INPUT_PULLUP);
pinMode(Send, INPUT_PULLUP);

pinMode(off, INPUT_PULLUP);

pinMode(value, INPUT_PULLUP);
pinMode(on,INPUT_PULLUP);
delay(5000);
re1 = EEPROM.read(11);

re2 = EEPROM.read(12);
re3 = EEPROM.read(13);
digitalWrite(r1, re1);
digitalWrite(r2, re2);
digitalWrite(r3, re3);

if (EEPROM.read(0) == 0) {
} else {

de_write();

count_write();
values_write();
sete_write();
EEPROM.write(0, 0);
EEPROM.write(1, 1);
}
de_read();
count_read();
read_eeprom();
values_read();
sete_read();
}
void read_eeprom() {
Mode = EEPROM.read(1);
}
void loop() {

int value = analogRead(A5);
value = value -1;
value = value + sete;

if (digitalRead(stop) == 0) {
digitalWrite(r1,0);

delay(300); digitalWrite(bling,LOW); digitalWrite(dipar,LOW); digitalWrite(r3,0); EEPROM.write(13,0); delay(200); if (hh == 0) { hh = 1; Mode = !Mode; EEPROM.write(1, Mode); delay(100); }

} else {
hh = 0;
}
if (Mode == 1) {

digitalWrite(Relay1, HIGH); //LOWshuru if(timer<60){timer=timer+1; if(timer<50){ bt.print(value); //send bt.print(";"); digitalWrite(dipar, HIGH); bt.print(timer); bt.print(";"); } if(timer==2){ digitalWrite(r1,0); EEPROM.write(11,0); digitalWrite(r3,0); EEPROM.write(12,0); } delay(500); if(timer==60){ digitalWrite(dipar,LOW); bt.print(value); //send bt.print(";"); timer=58; if (value<values) { if(time<20){time=time+1; delay(200); if(time==1) { digitalWrite(bazar, HIGH); } if(time==20){ digitalWrite(bazar, LOW); } } delay(2000); digitalWrite(moter, HIGH); digitalWrite(r3,0); EEPROM.write(13,0); } else if(value<310){

digitalWrite(bazar, LOW);
digitalWrite(moter, LOW);
}

else if(value<0){ if(time<20){time=time+1; delay(200); if(time==1) { digitalWrite(bazar, HIGH); } if(time==20){ digitalWrite(bazar, LOW); } } digitalWrite(bazar, LOW); digitalWrite(moter,HIGH); }

Serial.println(value);

} } while (Serial.available())

{

delay(10); char c = Serial.read(); inputs += c; if (inputs.length() > 0) { Serial.println(inputs); if(inputs == "@") { values=values+1; delay(200); values_write(); for(int t=1;t<=5;t++){ delay(100); bt.print(values); bt.print(";");

}

} else if(inputs == "&") { values=values-1; delay(200); values_write(); for(int t=1;t<=5;t++){ delay(100); bt.print(values); bt.print(";");

}
}

else if(inputs == "X") { sete=sete+1; for(int t=1;t<=5;t++){

delay(100);
bt.print(sete);
bt.print(";");
}
Serial.println("+1 ");

} else if(inputs == "x") { sete=sete-1; sete_write(); for(int t=1;t<=5;t++){

delay(100);
bt.print(sete);
bt.print(";");
}
}

else if(inputs == "E") { digitalWrite(r1,0); EEPROM.write(11,0); digitalWrite(bling,HIGH); } else if(inputs == "S") { sete=0; values=10; sete_write(); values_write(); for(int t=1;t<=10;t++){ delay(100); bt.print(values); bt.print(";"); bt.print(sete); bt.print(";"); } } inputs = ""; } } //LOWpaste

}

else {

digitalWrite(Relay1, LOW); //highshuru if (digitalRead(Send) == 0) { digitalWrite(dipar, HIGH); delay(400); digitalWrite(dipar, LOW); delay(400); count = count + 1; count_write(); if(timer<60){timer=timer+1; if(timer==2) { delay(100); digitalWrite(r1,0); digitalWrite(r3,0); } bt.print(value); //send bt.print(";"); if(timer<50){ bt.print(timer); bt.print(";"); } if(timer==60){ digitalWrite(r1,0); digitalWrite(r3,0); timer=58; if (value<values) { if(time<20){time=time+1; delay(200); if(time==1) { digitalWrite(bazar, HIGH); } if(time==20){ digitalWrite(bazar, LOW); } } digitalWrite(moter, HIGH); digitalWrite(r3,0); EEPROM.write(13,0); } else if(value<310){ digitalWrite(bazar, LOW); digitalWrite(moter, LOW); } else if(value<0){ if(time<20){time=time+1; delay(200); if(time==1) { digitalWrite(bazar, HIGH); } if(time==20){ digitalWrite(bazar, LOW); } } digitalWrite(bazar, LOW); digitalWrite(moter,HIGH); } } } bt.print(count); bt.print(";"); if (count > de) { digitalWrite(bling,HIGH); count = 0; count_write(); digitalWrite(bazar, HIGH); delay(1000); digitalWrite(r1, 1);//offrelay digitalWrite(r2, 0); digitalWrite(r3,0); digitalWrite(bazar, LOW); }

}

if(digitalRead(start)==0){
count=0;
count_write();
timer=0;
digitalWrite(bazar, HIGH);
delay(200);
//only on
digitalWrite(r1,0);

digitalWrite(r2,1); } else{ delay(200); digitalWrite(bazar,LOW); } if(digitalRead(on)==0) { digitalWrite(bazar, HIGH); timer=0; delay(200); count = 0; count_write(); digitalWrite(r1,0); EEPROM.write(11,0); digitalWrite(r3,1); EEPROM.write(13,0); digitalWrite(r2,1); EEPROM.write(12,0); delay(1000); digitalWrite(bazar,LOW); digitalWrite(r3,0); EEPROM.write(13,0); }

if (digitalRead(off) == 0) {
digitalWrite(dipar, HIGH);
delay(200);
digitalWrite(dipar, LOW);
delay(200);

digitalWrite(bazar, HIGH); digitalWrite(r1, 1); EEPROM.write(11, 0); digitalWrite(r2, 0); EEPROM.write(12,0); delay(1000); digitalWrite(bazar, LOW); }

//HIGHpaste
}

while (Serial.available())

{

delay(10); char c = Serial.read(); inputs += c; if (inputs.length() > 0) { Serial.println(inputs); if(inputs == "A") { digitalWrite(bazar, HIGH); timer=0; count=0; count_write(); digitalWrite(r1,0); digitalWrite(r2,1); //onrelay digitalWrite(r3,1); delay(2000); //only on digitalWrite(r3,0); delay(500); digitalWrite(bazar,LOW); } else if(inputs == "a") { digitalWrite(bazar, HIGH); digitalWrite(r1,1); digitalWrite(r3,0); digitalWrite(r2,0); //onrelay time delay(100); //only on delay(500); digitalWrite(bazar,LOW); } else if(inputs == "B") { digitalWrite(r2,1); //onrelay EEPROM.write(12,1); } else if(inputs == "b") { digitalWrite(r2, 0);//onrelay EEPROM.write(12,0); digitalWrite(r3,0); //onrelay EEPROM.write(13,0);//TIMER on } else if(inputs == "C") { digitalWrite(r1, 0);//offrelay EEPROM.write(11, 0); digitalWrite(r2,1); EEPROM.write(12,1); digitalWrite(r3,1); //onrelay EEPROM.write(13,1);//TIMER on } else if(inputs == "c") { //onlyoff digitalWrite(r1,1);//offrelay EEPROM.write(11, 1); digitalWrite(r2,0); EEPROM.write(12,0); digitalWrite(r3,0); EEPROM.write(13,0); } else if(inputs == "E") { digitalWrite(r1,0); EEPROM.write(11,0); digitalWrite(bling,HIGH); } else if(inputs == "Y") { digitalWrite(dipar, HIGH); delay(200); digitalWrite(dipar, LOW); delay(200); if(mm<10){mm=mm+1; if(mm==10){ digitalWrite(bazar,HIGH); delay(500); digitalWrite(bazar,LOW); mm=0; } }

de=de +60;

de_write(); for(int t=1;t<=5;t++){ delay(100); bt.print(de); bt.print(";"); } Serial.println(de); Serial.println("+59 "); } else if(inputs == "y") { digitalWrite(dipar, HIGH); delay(200); digitalWrite(dipar, LOW); delay(200); if (de > 0) {

if(mm<10){mm=mm+1;
if(mm==10){

digitalWrite(bazar,HIGH); delay(500); digitalWrite(bazar,LOW); mm=0; } } de=de-60; de_write(); for(int t=1;t<=5;t++){ delay(100); bt.print(de); bt.print(";"); } Serial.println(de); Serial.println("-60 "); } } else if(inputs == "W"){ de=60; de_write(); for(int t=1;t<=5;t++){ delay(100); bt.print(de); bt.print(";"); } } else if(inputs == "@") { values=values+1; delay(200); values_write(); for(int t=1;t<=5;t++){ delay(100); bt.print(values); bt.print(";"); } } else if(inputs == "&") { values=values-1; delay(200); values_write(); for(int t=1;t<=5;t++){ delay(100); bt.print(values); bt.print(";"); } } else if(inputs == "X") { sete=sete+1; sete_write(); for(int t=1;t<=5;t++){ delay(100); bt.print(sete); bt.print(";"); } Serial.println("+1 "); } else if(inputs == "x") { sete=sete-1; sete_write(); for(int t=1;t<=5;t++){ delay(100); bt.print(sete); bt.print(";"); } } else if(inputs == "S") { sete=0; values=10; sete_write(); values_write(); for(int t=1;t<=10;t++){ delay(100); bt.print(sete); bt.print(";"); bt.print(values); bt.print(";"); } } inputs = ""; } }

}

void de_write() {

EEPROM.write(2, de % 10);
EEPROM.write(3, (de / 10) % 10);
EEPROM.write(4, (de / 100) % 10);
EEPROM.write(5, (de / 1000) % 10);
}
void de_read() {
de = EEPROM.read(5) * 1000 + EEPROM.read(4) * 100 + EEPROM.read(3) * 10 + EEPROM.read(2);
}

void count_write() {

EEPROM.write(6, count % 10);
EEPROM.write(7, (count / 10) % 10);
EEPROM.write(8, (count / 100) % 10);
EEPROM.write(9, (count / 1000) % 10);
}
void count_read() {
count = EEPROM.read(9) * 1000 + EEPROM.read(8) * 100 + EEPROM.read(7) * 10 + EEPROM.read(6);
}

void values_write() {

EEPROM.write(15, values % 10);
EEPROM.write(16, (values / 10) % 10);
EEPROM.write(17, (values / 100) % 10);
EEPROM.write(18, (values / 1000) % 10);
}
void values_read() {
values = EEPROM.read(18) * 1000 + EEPROM.read(17) * 100 + EEPROM.read(16) * 10 + EEPROM.read(15);
}

void sete_write() {

EEPROM.write(19, sete % 10);
EEPROM.write(20, (sete / 10) % 10);
EEPROM.write(21, (sete / 100) % 10);
EEPROM.write(22, (sete / 1000) % 10);
}
void sete_read() {
sete = EEPROM.read(22) * 1000 + EEPROM.read(20) * 100 + EEPROM.read(21) * 10 + EEPROM.read(19);
}

Akbar0333 commented

Ppp