Encountered an error during flashing: Unable to find device in SDP mode
Closed this issue · 3 comments
harshajk commented
Description
Following the step 4 in the guide - https://coral.ai/docs/dev-board-micro/get-started/#5-try-the-face-detection-example
(coralai) harshajk@Harsha-JK:~/coralai/coralmicro$ python3 scripts/flashtool.py -e detect_faces
...
Encountered an error during flashing: Unable to find device in SDP mode.
Click to expand!
Issue Type
Bug
Operating System
Ubuntu
Coral Device
Dev Board Micro
Other Devices
No response
Programming Language
C++
Relevant Log Output
(coralai) harshajk@Harsha-JK:~/coralai/coralmicro$ python3 scripts/flashtool.py -e detect_faces
Finding all necessary files
Creating Filesystem
Section: 0x0
iMX bootable image generated successfully
Boot Section 0x00000000:
FILL | adr=0x00010000 | len=0x00000004 | ptn=0xc2000105
FILL | adr=0x00010004 | len=0x00000004 | ptn=0x00010020
FILL | adr=0x00010008 | len=0x00000004 | ptn=0x00040004
FILL | adr=0x0001000c | len=0x00000004 | ptn=0x00080004
FILL | adr=0x00010020 | len=0x00000004 | ptn=0xc0010021
ENA | adr=0x00010000 | cnt=0x00000004 | flg=0x0110
ERAS | adr=0x00000004 | cnt=0x00000004 | flg=0x0110
ERAS | adr=0x00000008 | cnt=0x00000004 | flg=0x0110
ERAS | adr=0x0000000c | cnt=0x00000040 | flg=0x0110
LOAD | adr=0x00000004 | len=0x00017854 | crc=0x05aa6939 | flg=0x0110
LOAD | adr=0x00000008 | len=0x00017854 | crc=0xc7357e70 | flg=0x0110
STATE_CHECK_FOR_ANY
STATE_CHECK_FOR_CORAL_MICRO
STATE_RESET_TO_SDP
STATE_CHECK_FOR_SDP
Encountered an error during flashing: Unable to find device in SDP mode.harshajk commented
In some cases the error message is as below:
(coralai) harshajk@Harsha-JK:~/coralai/coralmicro$ python3 scripts/flashtool.py -e detect_faces --nodata
Finding all necessary files
Creating Filesystem
Section: 0x0
iMX bootable image generated successfully
Boot Section 0x00000000:
FILL | adr=0x00010000 | len=0x00000004 | ptn=0xc2000105
FILL | adr=0x00010004 | len=0x00000004 | ptn=0x00010020
FILL | adr=0x00010008 | len=0x00000004 | ptn=0x00040004
FILL | adr=0x0001000c | len=0x00000004 | ptn=0x00080004
FILL | adr=0x00010020 | len=0x00000004 | ptn=0xc0010021
ENA | adr=0x00010000 | cnt=0x00000004 | flg=0x0110
ERAS | adr=0x00000004 | cnt=0x00000004 | flg=0x0110
ERAS | adr=0x00000008 | cnt=0x00000004 | flg=0x0110
LOAD | adr=0x00000004 | len=0x00017854 | crc=0xce032b49 | flg=0x0110
LOAD | adr=0x00000008 | len=0x00017854 | crc=0x627b659a | flg=0x0110
STATE_CHECK_FOR_ANY
STATE_CHECK_FOR_CORAL_MICRO
STATE_RESET_TO_SDP
STATE_CHECK_FOR_SDP
STATE_LOAD_FLASHLOADER
Traceback (most recent call last):
File "/home/harshajk/coralai/coralmicro/scripts/flashtool.py", line 1193, in <module>
main()
File "/home/harshajk/coralai/coralmicro/scripts/flashtool.py", line 1182, in main
RunFlashtool(StateCheckForAny, sbfile_path=sbfile_path,
File "/home/harshajk/coralai/coralmicro/scripts/flashtool.py", line 821, in RunFlashtool
(prev_state, state) = (state, state(**state_kwargs))
File "/home/harshajk/coralai/coralmicro/scripts/flashtool.py", line 543, in StateLoadFlashloader
subprocess.check_call([blhost_path, '-u', sdp_vidpid(), '--', 'load-image',
File "/home/harshajk/anaconda3/envs/coralai/lib/python3.9/subprocess.py", line 373, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['/home/harshajk/coralai/coralmicro/third_party/nxp/blhost/bin/linux/amd64/blhost', '-u', '0x1fc9,0x13d', '--', 'load-image', '/tmp/tmpqgyhskxx/ivt_flashloader.bin']' returned non-zero exit status 1.
harshajk commented
Following the steps mentioned in Flashing stuck at state check for sdp helped. I entered the Serial Download Protocol manually and am able to flash again.
google-coral-bot commented