BTT mini 12864 display not working with BTT Skr mini e3 v2 board

[ramsoni08]

how to connect BTT mini 12864 display with BTT Skr e3 mini v2 board ?? in klipper firmware??

[gsl12]

Not sure, you can try to build your own cable to convert 2 connectors to one connector. Or you can try to use the PI as controller for the LCD as described here: https://github.com/gsl12/Tiny-M/tree/master/klipper_firmware/Fysetc%20Cheetah.

[properlypurple]

@ramsoni08 If you still need this to work, you should check the pinout here
https://github.com/bigtreetech/BGTHREETECH-MINI-12864-V1.0/blob/main/Hardware/BIGTREETECH%20MINI12864%20Interface.pdf

CLosing this as this is not a bug in the printer itself

[jtrmal]

also this might be a solution https://deepfriedhero.in/products/skr-mini-screen-adaptor-by-timmit99

…

On Wed, Dec 1, 2021 at 10:09 AM Kavya ***@***.***> wrote: @ramsoni08 <https://github.com/ramsoni08> If you still need this to work, you should check the pinout here https://github.com/bigtreetech/BGTHREETECH-MINI-12864-V1.0/blob/main/Hardware/BIGTREETECH%20MINI12864%20Interface.pdf CLosing this as this is not a bug in the printer itself — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#19 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACUKYX7K2UZEZRL5Z2H2E33UOY3BTANCNFSM5EWF3T4A> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>.