Issues
- 0
It appears that SB_PCB_Octopus_wiring.png has mismatched e-stepper wiring.
#60 opened by andrey-seryukov - 11
Neopixel stops when Fan starts
#27 opened by SchwabJ - 0
AUX schemtics
#58 opened by SGr33n - 0
lower_z_umbilical seems to have side mount hole offset from correct 2020 mounting position
#57 opened by Altirix - 1
Umbilical add plug square slot for XT30
#54 opened by ArdaFu - 2
V0.2 G2Z Misalignment
#55 opened by jnimety - 0
USB protection
#53 opened by wa2mze - 2
Trident Y endstop relocation?
#52 opened by Bart97 - 1
CAD request
#50 opened by axg20202 - 6
PINOUT_14_2 and Octopus wiring conflict
#40 opened by FlatEarthDave - 1
Please provide a 2 or 3 keystone insert variant of your V0.2 rear keystone skirt
#49 opened by driemekasten - 2
- 0
- 2
- 1
- 1
- 0
stealthburner PCB
#28 opened by visiontech4x4 - 1
- 0
12/24V fan Stealthburner Toolhead PCB
#24 opened by Nights77 - 3
Voron2.4_Trident_Pins_Mod
#22 opened by shalev-d - 1
Y Endstop Mod "incompatible" with 2.4r2
#21 opened by GiulianoM - 1
STL isn't rotated in the "printing" orientation
#19 opened by jtrmal - 14
Z endstop sleeves
#15 opened by rlaferla - 3
Frame PCB for FPC Toolhead PCB
#11 opened by MagicalFire86 - 0
Stealthburner_Toolhead_PCB BOM
#32 opened by TekuSP - 3
2-Piece PCB Silk Screen mixup?
#33 opened by Durahl - 1
jst connectors
#37 opened by dkuchay - 1
PCBs causing Interference with KlipperScreens
#38 opened by Durahl - 2
StealthBurner PCB single board FS port
#44 opened by appleimperio - 1
Please add 5v probe to support Voron Tap
#45 opened by iBral - 1
E-motor pinout photo may be incorrect
#34 opened by GaryBoone - 2
PCBWay overlapped holes
#23 opened by jvandervyver - 2
Issues with the Voron 2.4 GE5C Z joint BOM
#17 opened by mathiasm74 - 1
Is it necessary to have the plastic washers for the version 3.2 afterburner toolhead?
#7 opened by hifihedgehog - 8
Multiple potential fire-hazards
#4 opened by Kirinkunhime - 1
Source files
#1 opened by properlypurple