Error (use-package): haskell-mode/:config: Symbol’s value as variable is void: haskell-debug-mode-map
dewijones92 opened this issue · 0 comments
dewijones92 commented
Hello
I get this error when using haskell-mode
Error (use-package): haskell-mode/:config: Symbol’s value as variable is void: haskell-debug-mode-map
Could someone have a look please? thanks 😃
Here is my emacs config - very vanilla spacemacs - all I have added is haskell and lsp
;; -*- mode: emacs-lisp; lexical-binding: t -*-
;; This file is loaded by Spacemacs at startup.
;; It must be stored in your home directory.
(defun dotspacemacs/layers ()
"Layer configuration:
This function should only modify configuration layer settings."
(setq-default
;; Base distribution to use. This is a layer contained in the directory
;; `+distribution'. For now available distributions are `spacemacs-base'
;; or `spacemacs'. (default 'spacemacs)
dotspacemacs-distribution 'spacemacs
;; Lazy installation of layers (i.e. layers are installed only when a file
;; with a supported type is opened). Possible values are `all', `unused'
;; and `nil'. `unused' will lazy install only unused layers (i.e. layers
;; not listed in variable `dotspacemacs-configuration-layers'), `all' will
;; lazy install any layer that support lazy installation even the layers
;; listed in `dotspacemacs-configuration-layers'. `nil' disable the lazy
;; installation feature and you have to explicitly list a layer in the
;; variable `dotspacemacs-configuration-layers' to install it.
;; (default 'unused)
dotspacemacs-enable-lazy-installation 'unused
;; If non-nil then Spacemacs will ask for confirmation before installing
;; a layer lazily. (default t)
dotspacemacs-ask-for-lazy-installation t
;; List of additional paths where to look for configuration layers.
;; Paths must have a trailing slash (i.e. `~/.mycontribs/')
dotspacemacs-configuration-layer-path '()
;; List of configuration layers to load.
dotspacemacs-configuration-layers
'(haskell
lsp
;; ----------------------------------------------------------------
;; Example of useful layers you may want to use right away.
;; Uncomment some layer names and press `SPC f e R' (Vim style) or
;; `M-m f e R' (Emacs style) to install them.
;; ----------------------------------------------------------------
;; auto-completion
;; better-defaults
emacs-lisp
;; git
helm
;; lsp
;; markdown
multiple-cursors
;; org
;; (shell :variables
;; shell-default-height 30
;; shell-default-position 'bottom)
;; spell-checking
;; syntax-checking
;; version-control
treemacs)
;; List of additional packages that will be installed without being wrapped
;; in a layer (generally the packages are installed only and should still be
;; loaded using load/require/use-package in the user-config section below in
;; this file). If you need some configuration for these packages, then
;; consider creating a layer. You can also put the configuration in
;; `dotspacemacs/user-config'. To use a local version of a package, use the
;; `:location' property: '(your-package :location "~/path/to/your-package/")
;; Also include the dependencies as they will not be resolved automatically.
dotspacemacs-additional-packages '()
;; A list of packages that cannot be updated.
dotspacemacs-frozen-packages '()
;; A list of packages that will not be installed and loaded.
dotspacemacs-excluded-packages '()
;; Defines the behaviour of Spacemacs when installing packages.
;; Possible values are `used-only', `used-but-keep-unused' and `all'.
;; `used-only' installs only explicitly used packages and deletes any unused
;; packages as well as their unused dependencies. `used-but-keep-unused'
;; installs only the used packages but won't delete unused ones. `all'
;; installs *all* packages supported by Spacemacs and never uninstalls them.
;; (default is `used-only')
dotspacemacs-install-packages 'used-only))
(defun dotspacemacs/init ()
"Initialization:
This function is called at the very beginning of Spacemacs startup,
before layer configuration.
It should only modify the values of Spacemacs settings."
;; This setq-default sexp is an exhaustive list of all the supported
;; spacemacs settings.
(setq-default
;; If non-nil then enable support for the portable dumper. You'll need to
;; compile Emacs 27 from source following the instructions in file
;; EXPERIMENTAL.org at to root of the git repository.
;;
;; WARNING: pdumper does not work with Native Compilation, so it's disabled
;; regardless of the following setting when native compilation is in effect.
;;
;; (default nil)
dotspacemacs-enable-emacs-pdumper nil
;; Name of executable file pointing to emacs 27+. This executable must be
;; in your PATH.
;; (default "emacs")
dotspacemacs-emacs-pdumper-executable-file "emacs"
;; Name of the Spacemacs dump file. This is the file will be created by the
;; portable dumper in the cache directory under dumps sub-directory.
;; To load it when starting Emacs add the parameter `--dump-file'
;; when invoking Emacs 27.1 executable on the command line, for instance:
;; ./emacs --dump-file=$HOME/.emacs.d/.cache/dumps/spacemacs-27.1.pdmp
;; (default (format "spacemacs-%s.pdmp" emacs-version))
dotspacemacs-emacs-dumper-dump-file (format "spacemacs-%s.pdmp" emacs-version)
;; If non-nil ELPA repositories are contacted via HTTPS whenever it's
;; possible. Set it to nil if you have no way to use HTTPS in your
;; environment, otherwise it is strongly recommended to let it set to t.
;; This variable has no effect if Emacs is launched with the parameter
;; `--insecure' which forces the value of this variable to nil.
;; (default t)
dotspacemacs-elpa-https t
;; Maximum allowed time in seconds to contact an ELPA repository.
;; (default 5)
dotspacemacs-elpa-timeout 5
;; Set `gc-cons-threshold' and `gc-cons-percentage' when startup finishes.
;; This is an advanced option and should not be changed unless you suspect
;; performance issues due to garbage collection operations.
;; (default '(100000000 0.1))
dotspacemacs-gc-cons '(100000000 0.1)
;; Set `read-process-output-max' when startup finishes.
;; This defines how much data is read from a foreign process.
;; Setting this >= 1 MB should increase performance for lsp servers
;; in emacs 27.
;; (default (* 1024 1024))
dotspacemacs-read-process-output-max (* 1024 1024)
;; If non-nil then Spacelpa repository is the primary source to install
;; a locked version of packages. If nil then Spacemacs will install the
;; latest version of packages from MELPA. Spacelpa is currently in
;; experimental state please use only for testing purposes.
;; (default nil)
dotspacemacs-use-spacelpa nil
;; If non-nil then verify the signature for downloaded Spacelpa archives.
;; (default t)
dotspacemacs-verify-spacelpa-archives t
;; If non-nil then spacemacs will check for updates at startup
;; when the current branch is not `develop'. Note that checking for
;; new versions works via git commands, thus it calls GitHub services
;; whenever you start Emacs. (default nil)
dotspacemacs-check-for-update nil
;; If non-nil, a form that evaluates to a package directory. For example, to
;; use different package directories for different Emacs versions, set this
;; to `emacs-version'. (default 'emacs-version)
dotspacemacs-elpa-subdirectory 'emacs-version
;; One of `vim', `emacs' or `hybrid'.
;; `hybrid' is like `vim' except that `insert state' is replaced by the
;; `hybrid state' with `emacs' key bindings. The value can also be a list
;; with `:variables' keyword (similar to layers). Check the editing styles
;; section of the documentation for details on available variables.
;; (default 'vim)
dotspacemacs-editing-style 'vim
;; If non-nil show the version string in the Spacemacs buffer. It will
;; appear as (spacemacs version)@(emacs version)
;; (default t)
dotspacemacs-startup-buffer-show-version t
;; Specify the startup banner. Default value is `official', it displays
;; the official spacemacs logo. An integer value is the index of text
;; banner, `random' chooses a random text banner in `core/banners'
;; directory. A string value must be a path to an image format supported
;; by your Emacs build.
;; If the value is nil then no banner is displayed. (default 'official)
dotspacemacs-startup-banner 'official
;; Scale factor controls the scaling (size) of the startup banner. Default
;; value is `auto' for scaling the logo automatically to fit all buffer
;; contents, to a maximum of the full image height and a minimum of 3 line
;; heights. If set to a number (int or float) it is used as a constant
;; scaling factor for the default logo size.
dotspacemacs-startup-banner-scale 'auto
;; List of items to show in startup buffer or an association list of
;; the form `(list-type . list-size)`. If nil then it is disabled.
;; Possible values for list-type are:
;; `recents' `recents-by-project' `bookmarks' `projects' `agenda' `todos'.
;; List sizes may be nil, in which case
;; `spacemacs-buffer-startup-lists-length' takes effect.
;; The exceptional case is `recents-by-project', where list-type must be a
;; pair of numbers, e.g. `(recents-by-project . (7 . 5))', where the first
;; number is the project limit and the second the limit on the recent files
;; within a project.
dotspacemacs-startup-lists '((recents . 5)
(projects . 7))
;; True if the home buffer should respond to resize events. (default t)
dotspacemacs-startup-buffer-responsive t
;; Show numbers before the startup list lines. (default t)
dotspacemacs-show-startup-list-numbers t
;; The minimum delay in seconds between number key presses. (default 0.4)
dotspacemacs-startup-buffer-multi-digit-delay 0.4
;; If non-nil, show file icons for entries and headings on Spacemacs home buffer.
;; This has no effect in terminal or if "all-the-icons" package or the font
;; is not installed. (default nil)
dotspacemacs-startup-buffer-show-icons nil
;; Default major mode for a new empty buffer. Possible values are mode
;; names such as `text-mode'; and `nil' to use Fundamental mode.
;; (default `text-mode')
dotspacemacs-new-empty-buffer-major-mode 'text-mode
;; Default major mode of the scratch buffer (default `text-mode')
dotspacemacs-scratch-mode 'text-mode
;; If non-nil, *scratch* buffer will be persistent. Things you write down in
;; *scratch* buffer will be saved and restored automatically.
dotspacemacs-scratch-buffer-persistent nil
;; If non-nil, `kill-buffer' on *scratch* buffer
;; will bury it instead of killing.
dotspacemacs-scratch-buffer-unkillable nil
;; Initial message in the scratch buffer, such as "Welcome to Spacemacs!"
;; (default nil)
dotspacemacs-initial-scratch-message nil
;; List of themes, the first of the list is loaded when spacemacs starts.
;; Press `SPC T n' to cycle to the next theme in the list (works great
;; with 2 themes variants, one dark and one light)
dotspacemacs-themes '(spacemacs-dark
spacemacs-light)
;; Set the theme for the Spaceline. Supported themes are `spacemacs',
;; `all-the-icons', `custom', `doom', `vim-powerline' and `vanilla'. The
;; first three are spaceline themes. `doom' is the doom-emacs mode-line.
;; `vanilla' is default Emacs mode-line. `custom' is a user defined themes,
;; refer to the DOCUMENTATION.org for more info on how to create your own
;; spaceline theme. Value can be a symbol or list with additional properties.
;; (default '(spacemacs :separator wave :separator-scale 1.5))
dotspacemacs-mode-line-theme '(spacemacs :separator wave :separator-scale 1.5)
;; If non-nil the cursor color matches the state color in GUI Emacs.
;; (default t)
dotspacemacs-colorize-cursor-according-to-state t
;; Default font or prioritized list of fonts. The `:size' can be specified as
;; a non-negative integer (pixel size), or a floating-point (point size).
;; Point size is recommended, because it's device independent. (default 10.0)
dotspacemacs-default-font '("Source Code Pro"
:size 10.0
:weight normal
:width normal)
;; The leader key (default "SPC")
dotspacemacs-leader-key "SPC"
;; The key used for Emacs commands `M-x' (after pressing on the leader key).
;; (default "SPC")
dotspacemacs-emacs-command-key "SPC"
;; The key used for Vim Ex commands (default ":")
dotspacemacs-ex-command-key ":"
;; The leader key accessible in `emacs state' and `insert state'
;; (default "M-m")
dotspacemacs-emacs-leader-key "M-m"
;; Major mode leader key is a shortcut key which is the equivalent of
;; pressing `<leader> m`. Set it to `nil` to disable it. (default ",")
dotspacemacs-major-mode-leader-key ","
;; Major mode leader key accessible in `emacs state' and `insert state'.
;; (default "C-M-m" for terminal mode, "<M-return>" for GUI mode).
;; Thus M-RET should work as leader key in both GUI and terminal modes.
;; C-M-m also should work in terminal mode, but not in GUI mode.
dotspacemacs-major-mode-emacs-leader-key (if window-system "<M-return>" "C-M-m")
;; These variables control whether separate commands are bound in the GUI to
;; the key pairs `C-i', `TAB' and `C-m', `RET'.
;; Setting it to a non-nil value, allows for separate commands under `C-i'
;; and TAB or `C-m' and `RET'.
;; In the terminal, these pairs are generally indistinguishable, so this only
;; works in the GUI. (default nil)
dotspacemacs-distinguish-gui-tab nil
;; Name of the default layout (default "Default")
dotspacemacs-default-layout-name "Default"
;; If non-nil the default layout name is displayed in the mode-line.
;; (default nil)
dotspacemacs-display-default-layout nil
;; If non-nil then the last auto saved layouts are resumed automatically upon
;; start. (default nil)
dotspacemacs-auto-resume-layouts nil
;; If non-nil, auto-generate layout name when creating new layouts. Only has
;; effect when using the "jump to layout by number" commands. (default nil)
dotspacemacs-auto-generate-layout-names nil
;; Size (in MB) above which spacemacs will prompt to open the large file
;; literally to avoid performance issues. Opening a file literally means that
;; no major mode or minor modes are active. (default is 1)
dotspacemacs-large-file-size 1
;; Location where to auto-save files. Possible values are `original' to
;; auto-save the file in-place, `cache' to auto-save the file to another
;; file stored in the cache directory and `nil' to disable auto-saving.
;; (default 'cache)
dotspacemacs-auto-save-file-location 'cache
;; Maximum number of rollback slots to keep in the cache. (default 5)
dotspacemacs-max-rollback-slots 5
;; If non-nil, the paste transient-state is enabled. While enabled, after you
;; paste something, pressing `C-j' and `C-k' several times cycles through the
;; elements in the `kill-ring'. (default nil)
dotspacemacs-enable-paste-transient-state nil
;; Which-key delay in seconds. The which-key buffer is the popup listing
;; the commands bound to the current keystroke sequence. (default 0.4)
dotspacemacs-which-key-delay 0.4
;; Which-key frame position. Possible values are `right', `bottom' and
;; `right-then-bottom'. right-then-bottom tries to display the frame to the
;; right; if there is insufficient space it displays it at the bottom.
;; (default 'bottom)
dotspacemacs-which-key-position 'bottom
;; Control where `switch-to-buffer' displays the buffer. If nil,
;; `switch-to-buffer' displays the buffer in the current window even if
;; another same-purpose window is available. If non-nil, `switch-to-buffer'
;; displays the buffer in a same-purpose window even if the buffer can be
;; displayed in the current window. (default nil)
dotspacemacs-switch-to-buffer-prefers-purpose nil
;; If non-nil a progress bar is displayed when spacemacs is loading. This
;; may increase the boot time on some systems and emacs builds, set it to
;; nil to boost the loading time. (default t)
dotspacemacs-loading-progress-bar t
;; If non-nil the frame is fullscreen when Emacs starts up. (default nil)
;; (Emacs 24.4+ only)
dotspacemacs-fullscreen-at-startup nil
;; If non-nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
;; Use to disable fullscreen animations in OSX. (default nil)
dotspacemacs-fullscreen-use-non-native nil
;; If non-nil the frame is maximized when Emacs starts up.
;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
;; (default nil) (Emacs 24.4+ only)
dotspacemacs-maximized-at-startup nil
;; If non-nil the frame is undecorated when Emacs starts up. Combine this
;; variable with `dotspacemacs-maximized-at-startup' in OSX to obtain
;; borderless fullscreen. (default nil)
dotspacemacs-undecorated-at-startup nil
;; A value from the range (0..100), in increasing opacity, which describes
;; the transparency level of a frame when it's active or selected.
;; Transparency can be toggled through `toggle-transparency'. (default 90)
dotspacemacs-active-transparency 90
;; A value from the range (0..100), in increasing opacity, which describes
;; the transparency level of a frame when it's inactive or deselected.
;; Transparency can be toggled through `toggle-transparency'. (default 90)
dotspacemacs-inactive-transparency 90
;; If non-nil show the titles of transient states. (default t)
dotspacemacs-show-transient-state-title t
;; If non-nil show the color guide hint for transient state keys. (default t)
dotspacemacs-show-transient-state-color-guide t
;; If non-nil unicode symbols are displayed in the mode line.
;; If you use Emacs as a daemon and wants unicode characters only in GUI set
;; the value to quoted `display-graphic-p'. (default t)
dotspacemacs-mode-line-unicode-symbols t
;; If non-nil smooth scrolling (native-scrolling) is enabled. Smooth
;; scrolling overrides the default behavior of Emacs which recenters point
;; when it reaches the top or bottom of the screen. (default t)
dotspacemacs-smooth-scrolling t
;; Show the scroll bar while scrolling. The auto hide time can be configured
;; by setting this variable to a number. (default t)
dotspacemacs-scroll-bar-while-scrolling t
;; Control line numbers activation.
;; If set to `t', `relative' or `visual' then line numbers are enabled in all
;; `prog-mode' and `text-mode' derivatives. If set to `relative', line
;; numbers are relative. If set to `visual', line numbers are also relative,
;; but only visual lines are counted. For example, folded lines will not be
;; counted and wrapped lines are counted as multiple lines.
;; This variable can also be set to a property list for finer control:
;; '(:relative nil
;; :visual nil
;; :disabled-for-modes dired-mode
;; doc-view-mode
;; markdown-mode
;; org-mode
;; pdf-view-mode
;; text-mode
;; :size-limit-kb 1000)
;; When used in a plist, `visual' takes precedence over `relative'.
;; (default nil)
dotspacemacs-line-numbers nil
;; Code folding method. Possible values are `evil', `origami' and `vimish'.
;; (default 'evil)
dotspacemacs-folding-method 'evil
;; If non-nil and `dotspacemacs-activate-smartparens-mode' is also non-nil,
;; `smartparens-strict-mode' will be enabled in programming modes.
;; (default nil)
dotspacemacs-smartparens-strict-mode nil
;; If non-nil smartparens-mode will be enabled in programming modes.
;; (default t)
dotspacemacs-activate-smartparens-mode t
;; If non-nil pressing the closing parenthesis `)' key in insert mode passes
;; over any automatically added closing parenthesis, bracket, quote, etc...
;; This can be temporary disabled by pressing `C-q' before `)'. (default nil)
dotspacemacs-smart-closing-parenthesis nil
;; Select a scope to highlight delimiters. Possible values are `any',
;; `current', `all' or `nil'. Default is `all' (highlight any scope and
;; emphasis the current one). (default 'all)
dotspacemacs-highlight-delimiters 'all
;; If non-nil, start an Emacs server if one is not already running.
;; (default nil)
dotspacemacs-enable-server nil
;; Set the emacs server socket location.
;; If nil, uses whatever the Emacs default is, otherwise a directory path
;; like \"~/.emacs.d/server\". It has no effect if
;; `dotspacemacs-enable-server' is nil.
;; (default nil)
dotspacemacs-server-socket-dir nil
;; If non-nil, advise quit functions to keep server open when quitting.
;; (default nil)
dotspacemacs-persistent-server nil
;; List of search tool executable names. Spacemacs uses the first installed
;; tool of the list. Supported tools are `rg', `ag', `pt', `ack' and `grep'.
;; (default '("rg" "ag" "pt" "ack" "grep"))
dotspacemacs-search-tools '("rg" "ag" "pt" "ack" "grep")
;; Format specification for setting the frame title.
;; %a - the `abbreviated-file-name', or `buffer-name'
;; %t - `projectile-project-name'
;; %I - `invocation-name'
;; %S - `system-name'
;; %U - contents of $USER
;; %b - buffer name
;; %f - visited file name
;; %F - frame name
;; %s - process status
;; %p - percent of buffer above top of window, or Top, Bot or All
;; %P - percent of buffer above bottom of window, perhaps plus Top, or Bot or All
;; %m - mode name
;; %n - Narrow if appropriate
;; %z - mnemonics of buffer, terminal, and keyboard coding systems
;; %Z - like %z, but including the end-of-line format
;; If nil then Spacemacs uses default `frame-title-format' to avoid
;; performance issues, instead of calculating the frame title by
;; `spacemacs/title-prepare' all the time.
;; (default "%I@%S")
dotspacemacs-frame-title-format "%I@%S"
;; Format specification for setting the icon title format
;; (default nil - same as frame-title-format)
dotspacemacs-icon-title-format nil
;; Color highlight trailing whitespace in all prog-mode and text-mode derived
;; modes such as c++-mode, python-mode, emacs-lisp, html-mode, rst-mode etc.
;; (default t)
dotspacemacs-show-trailing-whitespace t
;; Delete whitespace while saving buffer. Possible values are `all'
;; to aggressively delete empty line and long sequences of whitespace,
;; `trailing' to delete only the whitespace at end of lines, `changed' to
;; delete only whitespace for changed lines or `nil' to disable cleanup.
;; (default nil)
dotspacemacs-whitespace-cleanup nil
;; If non-nil activate `clean-aindent-mode' which tries to correct
;; virtual indentation of simple modes. This can interfere with mode specific
;; indent handling like has been reported for `go-mode'.
;; If it does deactivate it here.
;; (default t)
dotspacemacs-use-clean-aindent-mode t
;; Accept SPC as y for prompts if non-nil. (default nil)
dotspacemacs-use-SPC-as-y nil
;; If non-nil shift your number row to match the entered keyboard layout
;; (only in insert state). Currently supported keyboard layouts are:
;; `qwerty-us', `qwertz-de' and `querty-ca-fr'.
;; New layouts can be added in `spacemacs-editing' layer.
;; (default nil)
dotspacemacs-swap-number-row nil
;; Either nil or a number of seconds. If non-nil zone out after the specified
;; number of seconds. (default nil)
dotspacemacs-zone-out-when-idle nil
;; Run `spacemacs/prettify-org-buffer' when
;; visiting README.org files of Spacemacs.
;; (default nil)
dotspacemacs-pretty-docs nil
;; If nil the home buffer shows the full path of agenda items
;; and todos. If non-nil only the file name is shown.
dotspacemacs-home-shorten-agenda-source nil
;; If non-nil then byte-compile some of Spacemacs files.
dotspacemacs-byte-compile nil))
(defun dotspacemacs/user-env ()
"Environment variables setup.
This function defines the environment variables for your Emacs session. By
default it calls `spacemacs/load-spacemacs-env' which loads the environment
variables declared in `~/.spacemacs.env' or `~/.spacemacs.d/.spacemacs.env'.
See the header of this file for more information."
(spacemacs/load-spacemacs-env)
)
(defun dotspacemacs/user-init ()
"Initialization for user code:
This function is called immediately after `dotspacemacs/init', before layer
configuration.
It is mostly for variables that should be set before packages are loaded.
If you are unsure, try setting them in `dotspacemacs/user-config' first."
)
(defun dotspacemacs/user-load ()
"Library to load while dumping.
This function is called only while dumping Spacemacs configuration. You can
`require' or `load' the libraries of your choice that will be included in the
dump."
)
(defun dotspacemacs/user-config ()
"Configuration for user code:
This function is called at the very end of Spacemacs startup, after layer
configuration.
Put your configuration code here, except for variables that should be set
before packages are loaded."
)
;; Do not write anything past this comment. This is where Emacs will
;; auto-generate custom variable definitions.
(defun dotspacemacs/emacs-custom-settings ()
"Emacs custom settings.
This is an auto-generated function, do not modify its content directly, use
Emacs customize menu instead.
This function is called at the very end of Spacemacs initialization."
(custom-set-variables
;; custom-set-variables was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
'(package-selected-packages
'(ac-ispell auto-complete auto-yasnippet flycheck-pos-tip pos-tip fuzzy helm-c-yasnippet helm-company helm-lsp lsp-origami origami lsp-treemacs lsp-ui yasnippet-snippets attrap cmm-mode company-cabal counsel-gtags counsel swiper ivy dante lcr company flycheck-haskell ggtags haskell-mode haskell-snippets yasnippet helm-gtags helm-hoogle hindent hlint-refactor lsp-haskell lsp-mode markdown-mode ace-jump-helm-line ace-link aggressive-indent auto-compile packed auto-highlight-symbol centered-cursor-mode clean-aindent-mode column-enforce-mode define-word devdocs dired-quick-sort drag-stuff dumb-jump editorconfig elisp-def elisp-slime-nav emr clang-format list-utils eval-sexp-fu evil-anzu anzu evil-args evil-cleverparens paredit evil-collection annalist evil-easymotion evil-ediff evil-escape evil-exchange evil-goggles evil-iedit-state iedit evil-indent-plus evil-lion evil-lisp-state evil-matchit evil-mc evil-nerd-commenter evil-numbers evil-surround evil-textobj-line evil-tutor evil-unimpaired evil-visual-mark-mode evil-visualstar expand-region eyebrowse fancy-battery flx-ido flycheck-elsa flycheck-package package-lint flycheck golden-ratio google-translate helm-ag helm-descbinds helm-flx flx helm-make helm-mode-manager helm-org helm-projectile helm-purpose helm-swoop helm-themes helm-xref helm helm-core help-fns+ hide-comnt highlight-indentation highlight-numbers parent-mode highlight-parentheses hl-todo compat hungry-delete indent-guide info+ inspector link-hint lorem-ipsum macrostep multi-line shut-up nameless open-junk-file org-superstar overseer f pkg-info epl paradox spinner password-generator popup popwin quickrun rainbow-delimiters request restart-emacs smartparens space-doc spaceline-all-the-icons memoize spaceline all-the-icons powerline spacemacs-purpose-popwin spacemacs-whitespace-cleanup string-inflection symbol-overlay symon term-cursor toc-org treemacs-evil treemacs-icons-dired treemacs-persp persp-mode treemacs-projectile treemacs projectile cfrs ht pfuture ace-window avy posframe s undo-tree queue uuidgen vi-tilde-fringe vim-powerline volatile-highlights window-purpose imenu-list winum dash writeroom-mode visual-fill-column ws-butler async bind-map diminish dotenv-mode evil-evilified-state font-lock+ holy-mode hybrid-mode evil goto-chg hydra lv pcre2el use-package bind-key which-key)))
(custom-set-faces
;; custom-set-faces was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
'(highlight-parentheses-highlight ((nil (:weight ultra-bold))) t))
)