wiii taking preference over ethernet
slyfox1186 opened this issue · 2 comments
slyfox1186 commented
Raspberry Pi Model
Raspberry Pi 1 B
Describe The Bug
I want my ethernet connection to be the only WAN available.
WiFi is overwriting all internet settings. It should be eth0 which IS connected but if I disable WiFi then I have no connection.
Not sure what is going on. It says in the manual that ethernet should overtake WiFi if it is detected.
Any ideas on what I am doing wrong?
Logs
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether MAC-ADDRESS-HERE brd MAC-ADDRESS-HERE
inet 192.168.1.40/24 brd 192.168.1.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::IPV6-ADDRESS/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether MAC-ADDRESS-HERE brd ff:ff:ff:ff:ff:ff permaddr MAC-ADDRESS-HERE
github-actions commented
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.
github-actions commented
This issue has been closed as no further activity has occurred.