Homepilot reports Errors
Bibo13 opened this issue · 14 comments
After updating the Adapter is HP now Reporting Errors an fill the Log up.
Do we have a chance to suppress this? Or can we have a DP to control the responsible devices?
Maybe that's the case and I have not seen it.
homepilot20.0 | 2019-10-02 12:48:11.597 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:47:59.534 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:47:47.553 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:47:35.532 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:47:23.622 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:47:11.532 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:46:59.493 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:46:47.517 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:46:35.477 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:46:23.473 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:46:11.403 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:45:59.419 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:45:47.423 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:45:35.418 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:45:23.383 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:45:11.411 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:44:59.377 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:44:47.387 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:44:35.408 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:44:23.365 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:44:11.344 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:43:59.372 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:43:47.417 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:43:35.302 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:43:23.316 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:43:11.382 | warn | Homepilot Device 1010006 reports an error
homepilot20.0 | 2019-10-02 12:42:59.256 | warn | Homepilot Device 1010006 reports an error
please set the log-level to debug and post the logs.
thanks!
i have done this. what do you need. the log after new start?
He is not delivering datas about actuators. 1010006 ist an actuator. but there is no data in cyclic output.
only sensors and transmitters.
what kind of device is it?
do you hava a deviceNumber from this type?
or a link to the rademacher page?
found in the log some datas. please have a look
homepilot_log.txt
it's a
DuoFern-RolloTron-Standard-1400/1405/1440: Wohnzimmer Klein (Device ID 1010006)
i will leave for a while. back a 5:30pm
found in the log some datas. please have a look
homepilot_log.txt
i can't see any error in your homepilot_log.txt
there is also not the error occurred inside. he only appears sporadically. the problem is, if you leave the adapter on debug but then a lot of data will be written to the log. therefore yes synonymous my question is there for the error a data point with which I could alam. the response time to the error would be shorter and I could see in the rademacher homepilot if he indicates an error. Incidentally, if you follow the facebook group you have the post of eva weber over the HP-log. I asked Rademacher. the solution is to rename the log file ending tgz and then unzip it.
so now i'm out for a while.
how can I update the adapter to 0.02 without losing the objects. I don't want to reinstall the adapter because it is not on the updatelist.
I caught the error.
019-10-02 17: 23: 12.359 - warn: homepilot20.0 Homepilot Device 1010001 reports an error
he should be in the attached logfile.
homepilot_log.txt
Solved: Installation from url will update if Adapter is installed
oh you are fast. thanks
I caught the error.
019-10-02 17: 23: 12.359 - warn: homepilot20.0 Homepilot Device 1010001 reports an errorhe should be in the attached logfile.
homepilot_log.txt
so i checked your logs and i can see, that one of your actuators (shutter) signals an error: obstacle detection
so i changed the log to loglevel info and from version 0.0.3 you can see the actuator error messages in the datapoint
how can I update the adapter to 0.02 without losing the objects. I don't want to reinstall the adapter because it is not on the updatelist.
there is an npm version 0.0.3 available since now! have fun