Tasmota receiving unknown commands on HA 2024.5.3
sjaks opened this issue · 1 comments
Tasmota-IRHAC used to work well last summer when I had HA 2023.5 installed. Now that a year has passed and I'm on 2024.5.3, I cannot control my AC unit at all. It seems the Tasmota device (ESP32 running tasmota-ir v. 13.0.0) is receiving the following MQTT messages for each action I do with the hvac entity:
17:36:55.712 MQT: stat/tasmota_hvac/RESULT = {"Command":"Unknown"}
I just downloaded the latest version of Tasmota-IRHVAC (v2024.4.0). The config I haven't touched but worked last year:
climate:
- platform: tasmota_irhvac
name: "IR HVAC"
command_topic: "cmnd/tasmota_hvac/irhvac"
state_topic: "tele/tasmota_hvac/RESULT"
temperature_sensor: sensor.living_room_temperature
humidity_sensor: sensor.living_room_humidity
vendor: "TROTEC_3550"
mqtt_delay: 0.0
min_temp: 16
max_temp: 26
target_temp: 20
supported_modes:
- "cool"
- "dry"
- "fan_only"
- "off"
supported_fan_speeds:
- "medium"
- "min"
- "max"
supported_swing_list:
- "off"
- "vertical"
hvac_model: "-1"
celsius_mode: "On"
keep_mode_when_off: True
ignore_off_temp: False
It seems the cheap ESP-32 boards can lose values from their memory if they haven't been powered on for a while (or something). The module configuration has reset and the GPIO pins were not configured to as IRSend and IRRecv. When I reselected those for the right pins, the device works from HA.
Closing...