hristo-atanasov/Tasmota-IRHVAC

Problem with AirWell HVAC

Closed this issue · 5 comments

hillaliy commented

Hi thank's for your work.
The code work just fine.
I have AirWell HVAC that a little bit tricky. the first command: "IRHVAC":{"Vendor":"AIRWELL","Model":1,"Power":"On","Mode":"Cool","Celsius":"On","Temp":24,"FanSpeed":"Auto","SwingV":"Off","SwingH":"Off","Quiet":"Off","Turbo":"Off","Econo":"Off","Light":"Off","Filter":"Off","Clean":"Off","Beep":"Off","Sleep":-1}, turn on the AC but if I change the temperature the AC get OFF. it's because the ON and OFF IR command it's the same.
I try to send manual command from Tasmota console with the command: IRhvac {"Vendor":"airwell", "Power":"off","Mode":"cool","FanSpeed":auto,"Temp":22} and it's work O.K.
So to turn the AC on / off the Json need to be with "power":on and when it's on and need to change temperature or mode cool / heat it's need "power":off
Can you help me with that problem.

the-mentor commented

Hi @hillaliy there is a custom build of tasmota with a fix for this issue that you can try.

you can find it here

https://github.com/ayavilevich/Tasmota/releases/tag/v0.1

hopefully at some point the code will be upstreamed.

-DM

ayavilevich commented

@hillaliy see #6 (comment)
it is an issue in tasmota. you can try my fork with a fix.

  • 👍2
hillaliy commented

I try your fix it's work perfect
Thanks.
How can I add DHT22 sensor?

  • 👍1
ayavilevich commented

@hillaliy happy to hear it works. you are welcome to close this issue.

your question about the DHT22 is not clear and this is probably not the right place to ask about it.

hillaliy commented

How can I see the current temperature on HA.
On your tasmota image there isn’t way to add sensor.