Panasonic AC - SwingV "off" not working
syfq91 opened this issue · 8 comments
My Panasonic AC (model 6) SwingV support 6 different swing modes: auto/highest/high/middle/low/lowest
but not off
.
When selecting "off" in home-assistant I can see it issue this command in Tasmota console:
13:27:08.720 MQT: stat/irBlaster/RESULT = {"IRHVAC":{"Vendor":"PANASONIC_AC","Model":6,"Mode":"Dry","Power":"On","Celsius":"On","Temp":20,"FanSpeed":"Auto","SwingV":"Off","SwingH":"Off","Quiet":"Off","Turbo":"Off","Econo":"Off","Light":"Off","Filter":"Off","Clean":"Off","Beep":"Off","Sleep":-1}}
This command does not make the swing stop.
Is it possible to overwrite the "off" with some other available swing mode? Or make it use 'default_swingv
when selecting "off"?
Below are my configuration:
climate:
- platform: tasmota_irhvac
name: "BR3 Aircond"
command_topic: "cmnd/irBlaster/irhvac"
state_topic: "stat/irBlaster/RESULT"
temperature_sensor: sensor.br3gateway_htu21_temperature
humidity_sensor: sensor.br3gateway_htu21_humidity
power_sensor: binary_sensor.br3sonoffcontact_contact
vendor: "PANASONIC_AC"
min_temp: 16
max_temp: 30
target_temp: 26
precision: 1
supported_modes:
- "cool"
- "dry"
- "auto"
- "off"
supported_fan_speeds:
- "medium"
- "min"
- "max"
- "auto"
supported_swing_list:
- "off"
- "vertical"
hvac_model: "6" #optional - default "1" string value
celsius_mode: "On" #optional - default "On" string value
default_swingv: "middle"
Panasonic AC is in auto mode when swing off. Auto mode is AC automatically controlled, so you need to specify a position to stop the vane completely.
Starting with v2022.08.28, this integration adds a service to control Vane. We can use Input select to control Vane.
Example
Input Select Helper
- input_select helper as
input_select.living_ac_swingv
- options:
- 'off'
- auto
- highest
- high
- low
- lowest
Automation
- Target climate as
climate.living_ac
alias: Set AC SwingV
description: ""
trigger:
- platform: state
entity_id:
- climate.living_ac
attribute: swingv
id: get
- platform: state
entity_id:
- input_select.living_ac_swingv
id: set
condition: []
action:
- if:
- condition: trigger
id: set
then:
- service: tasmota_irhvac.set_swingv
data:
entity_id: climate.living_ac
swingv: "{{states(trigger.entity_id)}}"
else:
- service: input_select.select_option
data:
option: "{{state_attr(trigger.entity_id, 'swingv')}}"
target:
entity_id: input_select.living_ac_swingv
mode: parallel
max: 2
Note: Currently you need his Github version of Tasmota-IRHVAC.
My understanding was slightly wrong. Many Panasonic ACs don't seem to have "off". It would also be nice to have an option to set the value to send instead of "off".
As another option, I tried the previous automation as a Blueprint.
When swingv and swingh are set to a value other than auto, I am considering saving it and sending it as the value when swing off.
It would also be nice to have an option to set the value to send instead of "off".
Yes, having this option will solve my problem. Maybe something like swingv_off_position
So I can customize different “off” position for AC in different room.
As another option, I tried the previous automation as a Blueprint.
Thanks for the blueprint, I need to try this later.
@syfq91 I created PR #89. Could you try the swing_off branch?
I tried your branch, but it still not working.
I think the issue is that when I turn on the AC, Tasmota send a command with swingv: off
(off
is not a valid mode for my AC).
20:30:42.696 MQT: stat/br3ir/RESULT = {"IRHVAC":{"Vendor":"PANASONIC_AC","Model":6,"Mode":"Auto","Power":"On","Celsius":"On","Temp":26,"FanSpeed":"Medium","SwingV":"Off","SwingH":"Off","Quiet":"Off","Turbo":"Off","Econo":"Off","Light":"Off","Filter":"Off","Clean":"Off","Beep":"Off","Sleep":-1}}
My AC just ignore the swingv: off
and set the flap in swingv: auto
mode (tasmota/home assistant does not aware that the AC is running flap set to auto
).
So later when I choose swing off
in home assistant, Tasmota will still send a command with swingv: off
20:35:04.104 MQT: stat/br3ir/RESULT = {"IRHVAC":{"Vendor":"PANASONIC_AC","Model":6,"Mode":"Auto","Power":"On","Celsius":"On","Temp":26,"FanSpeed":"Medium","SwingV":"Off","SwingH":"Off","Quiet":"Off","Turbo":"Off","Econo":"Off","Light":"Off","Filter":"Off","Clean":"Off","Beep":"Off","Sleep":-1}}
And I have a question: I have this in the configuration file: default_swingv: "middle"
When will the value default_swingv
be use? I thought it will be use when turning on the AC, but as you can see in the tasmota output above, it not using the swingv: middle
when turning on the AC.
First of all, a PR has been accepted, please use the master branch here.
default_swingv is used when the climate entity is created, not during HA startup.
After that, the previous value is referenced, so I think the saved value is "off".
You can check it in the "STATUS" of the "Developer Tools". It is a fix_swingv
.
To update the stored value send a position other than Auto with the device remote or set your desired position with the service set_swingv.