Does not copy user-data yml
Madic- opened this issue · 5 comments
Madic- commented
Hello,
I'm using the flash utility to flash an sdcard with a userdata yml file with the following command:
flash -d /dev/mmcblk0 -f hypriotos-rpi-v1.9.0.img -u node01.yml
But the node01.yml file does not get copied to /boot/user-meta.
It's still the default user-meta. The syntax is correct.
If I manually copy the file to /boot/user-meta and boot the rpi, everything is working
Log Output from the flash command:
(ansible2.4) [mne-adm@tp013 hypriot]$ flash -d /dev/mmcblk0 -f hypriotos-rpi-v1.9.0.img
[sudo] password for mne-adm:
Unmounting /dev/mmcblk0 ...
Flashing hypriotos-rpi-v1.9.0.img to /dev/mmcblk0 ...
1000MiB 0:00:00 [1.86GiB/s] [===================================================================================================================================================================>] 100%
242+4866 records in
242+4866 records out
1048576000 bytes (1.0 GB, 1000 MiB) copied, 78.2925 s, 13.4 MB/s
Waiting for device /dev/mmcblk0
/dev/mmcblk0:
re-reading partition table
Mounting Disk
Mounting /dev/mmcblk0 to customize...
total 35294
drwxr-xr-x. 3 mne-adm mne-adm 16384 Jan 1 1970 .
drwxrwxr-x. 3 mne-adm mne-adm 60 May 3 10:15 ..
-rwxr-xr-x. 1 mne-adm mne-adm 22264 Apr 22 17:33 bcm2708-rpi-0-w.dtb
-rwxr-xr-x. 1 mne-adm mne-adm 21761 Apr 22 17:33 bcm2708-rpi-b.dtb
-rwxr-xr-x. 1 mne-adm mne-adm 22020 Apr 22 17:33 bcm2708-rpi-b-plus.dtb
-rwxr-xr-x. 1 mne-adm mne-adm 21474 Apr 22 17:33 bcm2708-rpi-cm.dtb
-rwxr-xr-x. 1 mne-adm mne-adm 23044 Apr 22 17:33 bcm2709-rpi-2-b.dtb
-rwxr-xr-x. 1 mne-adm mne-adm 24240 Apr 22 17:33 bcm2710-rpi-3-b.dtb
-rwxr-xr-x. 1 mne-adm mne-adm 24503 Apr 22 17:33 bcm2710-rpi-3-b-plus.dtb
-rwxr-xr-x. 1 mne-adm mne-adm 22952 Apr 22 17:33 bcm2710-rpi-cm3.dtb
-rwxr-xr-x. 1 mne-adm mne-adm 52064 Mar 28 14:07 bootcode.bin
-rwxr-xr-x. 1 mne-adm mne-adm 240 Apr 28 20:57 cmdline.txt
-rwxr-xr-x. 1 mne-adm mne-adm 203 Apr 28 20:57 config.txt
-rwxr-xr-x. 1 mne-adm mne-adm 18693 Apr 22 16:27 COPYING.linux
-rwxr-xr-x. 1 mne-adm mne-adm 2599 Apr 17 13:50 fixup_cd.dat
-rwxr-xr-x. 1 mne-adm mne-adm 6575 Apr 17 13:50 fixup.dat
-rwxr-xr-x. 1 mne-adm mne-adm 9726 Apr 17 13:50 fixup_db.dat
-rwxr-xr-x. 1 mne-adm mne-adm 9730 Apr 17 13:50 fixup_x.dat
-rwxr-xr-x. 1 mne-adm mne-adm 13172908 Apr 22 17:33 kernel7.img
-rwxr-xr-x. 1 mne-adm mne-adm 10245764 Apr 22 17:33 kernel.img
-rwxr-xr-x. 1 mne-adm mne-adm 1494 Mar 9 19:28 LICENCE.broadcom
-rwxr-xr-x. 1 mne-adm mne-adm 23 Apr 28 20:53 meta-data
-rwxr-xr-x. 1 mne-adm mne-adm 396 Apr 28 21:01 os-release
drwxr-xr-x. 2 mne-adm mne-adm 12288 Apr 28 20:56 overlays
-rwxr-xr-x. 1 mne-adm mne-adm 673444 Apr 17 13:50 start_cd.elf
-rwxr-xr-x. 1 mne-adm mne-adm 4968292 Apr 17 13:50 start_db.elf
-rwxr-xr-x. 1 mne-adm mne-adm 2825124 Apr 17 13:50 start.elf
-rwxr-xr-x. 1 mne-adm mne-adm 3912164 Apr 17 13:50 start_x.elf
-rwxr-xr-x. 1 mne-adm mne-adm 2050 Apr 28 20:53 user-data
Unmounting /dev/mmcblk0 ...
Finished.
Kind Regards,
Madic
StefanScherer commented
Wow. This is strange. You could try to run it with adding set -x in the second line of the script.
Maybe we can find out what‘s going wrong with that output.
StepFischer commented
HI,
same on my site.
$ flash --userdata ./user-data.yaml hypriotos-rpi-v1.9.0-default.img.zip
/usr/bin/unzip
Uncompressing hypriotos-rpi-v1.9.0-default.img.zip ...
Archive: hypriotos-rpi-v1.9.0-default.img.zip
inflating: /tmp/hypriotos-rpi-v1.9.0.img
Use /tmp/hypriotos-rpi-v1.9.0.img
NAME SIZE TYPE MOUNTPOINT
sda 465,8G disk
├─sda1 93,1G part /
sdb 465,8G disk
├─sdb1 450M part
├─sdb2 99M part /boot/efi
├─sdb3 16M part
└─sdb4 465,2G part
sdc 1,8T disk
├─sdc1 128M part
└─sdc2 1,8T part
sdd 1,8T disk
└─sdd1 1,8T part
sde 149,1G disk
└─sde1 149G part /run/media/stephan/Xterne Platte
├─sda2 14,9G part [SWAP]
└─sda3 357,7G part /home
sdg 59,7G disk
├─sdg1 64M part
└─sdg2 935M part /run/media/stephan/root
sr0 1024M rom
Please pick your device: sdg
Is /dev/sdg correct? yes
Unmounting /dev/sdg ...
Flashing /tmp/hypriotos-rpi-v1.9.0.img to /dev/sdg ...
1000MiB 0:00:00 [2,69GiB/s] [===================================================================================================================================================================>] 100%
666+1570 records in
666+1570 records out
1048576000 bytes (1,0 GB, 1000 MiB) copied, 51,6436 s, 20,3 MB/s
Waiting for device /dev/sdg
/dev/sdg:
re-reading partition table
Mounting Disk
Mounting /dev/sdg to customize...
total 35294
drwxr-xr-x 3 stephan users 16384 1. Jan 1970 .
drwxr-xr-x 3 stephan users 60 18. Jul 08:08 ..
-rwxr-xr-x 1 stephan users 22264 22. Apr 17:33 bcm2708-rpi-0-w.dtb
-rwxr-xr-x 1 stephan users 21761 22. Apr 17:33 bcm2708-rpi-b.dtb
-rwxr-xr-x 1 stephan users 22020 22. Apr 17:33 bcm2708-rpi-b-plus.dtb
-rwxr-xr-x 1 stephan users 21474 22. Apr 17:33 bcm2708-rpi-cm.dtb
-rwxr-xr-x 1 stephan users 23044 22. Apr 17:33 bcm2709-rpi-2-b.dtb
-rwxr-xr-x 1 stephan users 24240 22. Apr 17:33 bcm2710-rpi-3-b.dtb
-rwxr-xr-x 1 stephan users 24503 22. Apr 17:33 bcm2710-rpi-3-b-plus.dtb
-rwxr-xr-x 1 stephan users 22952 22. Apr 17:33 bcm2710-rpi-cm3.dtb
-rwxr-xr-x 1 stephan users 52064 28. Mär 14:07 bootcode.bin
-rwxr-xr-x 1 stephan users 240 28. Apr 20:57 cmdline.txt
-rwxr-xr-x 1 stephan users 203 28. Apr 20:57 config.txt
-rwxr-xr-x 1 stephan users 18693 22. Apr 16:27 COPYING.linux
-rwxr-xr-x 1 stephan users 2599 17. Apr 13:50 fixup_cd.dat
-rwxr-xr-x 1 stephan users 6575 17. Apr 13:50 fixup.dat
-rwxr-xr-x 1 stephan users 9726 17. Apr 13:50 fixup_db.dat
-rwxr-xr-x 1 stephan users 9730 17. Apr 13:50 fixup_x.dat
-rwxr-xr-x 1 stephan users 13172908 22. Apr 17:33 kernel7.img
-rwxr-xr-x 1 stephan users 10245764 22. Apr 17:33 kernel.img
-rwxr-xr-x 1 stephan users 1494 9. Mär 19:28 LICENCE.broadcom
-rwxr-xr-x 1 stephan users 23 28. Apr 20:53 meta-data
-rwxr-xr-x 1 stephan users 396 28. Apr 21:01 os-release
drwxr-xr-x 2 stephan users 12288 28. Apr 20:56 overlays
-rwxr-xr-x 1 stephan users 673444 17. Apr 13:50 start_cd.elf
-rwxr-xr-x 1 stephan users 4968292 17. Apr 13:50 start_db.elf
-rwxr-xr-x 1 stephan users 2825124 17. Apr 13:50 start.elf
-rwxr-xr-x 1 stephan users 3912164 17. Apr 13:50 start_x.elf
-rwxr-xr-x 1 stephan users 2050 28. Apr 20:53 user-data
Copying cloud-init ./user-data.yaml to /tmp/1000/mnt.21123/user-data ...
Unmounting /dev/sdg ...
Finished.
/boot is still empty after flash. Using set -x prints nothing in the terminal.
Any suggestions?
StefanScherer commented
Does this still happen with the latest version of flash? I assume you do this on Linux?
I can't really help here.
g0lg0th7 commented
Hi, this thread help me.
In my case, running fedora (vmbox, usb), I had difficulties to mount sdcard after dd step.
Have :
- disabled selinux
- installed dos filesystem utilities from yum
- installed pv and hdparm
Work well after
Thanks
connormcmk commented
I had this problem as well. Changing the name of the user-data file to cloud-init.yml solved the problem for me. Not sure what the issue was, but it still shows up inside the sd card as user-data so it all worked in the end