i3detroit/Automatic-IoT-module-programming

Issues

• add mqtt username and password fields to sites.json

  #47 opened 4 years ago by abzman
  2

• Crashes if mqtt broker doesn't exist

  #43 opened 4 years ago by mtfurlan
  3

• does not handle missing fields gracefully

  #46 opened 4 years ago by abzman
  0

• More complete and correct installation instructions

  #44 opened 4 years ago by abzman
  0

• new rgbw strip controller firmware, make compatible with custom script programmer

  #45 opened 4 years ago by abzman
  0

• Crashes poorly if pio isn't installed

  #41 opened 4 years ago by mtfurlan
  0

• Check for duplicate and valid IPs

  #40 opened 4 years ago by mkfink
  3

• Check for duplicate device names

  #39 opened 4 years ago by mkfink
  0

• add a single retry for devices that fail to build/upload

  #4 opened 4 years ago by mkfink
  1

• online_check should do active query

  #23 opened 5 years ago by mtfurlan
  13

• Send mqtt config without flashing

  #19 opened 5 years ago by mtfurlan
  7

• Light switches turn on half the lights

  #21 opened 5 years ago by carpenma
  3

• 'ids' has some limitations that shouldn't exist

  #18 opened 5 years ago by mkfink
  21

• write fail/success log with each device, not at the end

  #3 opened 5 years ago by mkfink
  0

• write hass config deals poorly with devices with / in the name

  #11 opened 5 years ago by mtfurlan
  1

• some devices need two rounds of commands

  #6 opened 5 years ago by mkfink
  1

• use cmnd/.../backlog to send commands after reboot

  #5 opened 5 years ago by mkfink
  2

• Snapple vending compressor topic is too long

  #1 opened 6 years ago by mkfink
  0

• sort devices by module

  #2 opened 6 years ago by mkfink
  0