Pinned Repositories
amtdoor2
amtdoor3
BBB-PoE
ftditerm
gerbmerge
Fork of GerbMerge from RuggedCircuits.com
loco-rollers-n
Ball-bearing roller assembly for a model railway locomotive dyno in N scale.
pcie-mini-bridge
PCIe x1 bridge over USB C cable for hard to reach slots under graphics cards.
PoEPi-hardware
The hardware for the Raspberry Pi Zero power over Ethernet devices
ihartwig's Repositories
ihartwig/PoEPi-hardware
The hardware for the Raspberry Pi Zero power over Ethernet devices
ihartwig/amtdoor3
ihartwig/loco-rollers-n
Ball-bearing roller assembly for a model railway locomotive dyno in N scale.
ihartwig/pcie-mini-bridge
PCIe x1 bridge over USB C cable for hard to reach slots under graphics cards.
ihartwig/rpi-labio
Raspberry Pi breakout for general embedded systems labs.
ihartwig/teensy-frc-pwm-slider
A PWM signal generator controlled by a slider potentiometer running on a Teensy LC controller.
ihartwig/uart-friend
FTDI Friend like USB-UART bridge based on the CY7C65213 (or FT232R).
ihartwig/bathroombuddy-appengine
Appengine flask and web app for BathroomBuddy IoT toilet stall monitor
ihartwig/Bumblebee
Bumblebee daemon and client rewritten in C
ihartwig/dotfiles
ihartwig/frc-2022-fun
ihartwig/frc-2023-5026-mentors
5026 2023 robot repo!
ihartwig/frc-2023-sds-swerve-lib
ihartwig/frc-on-ftc-hw
Collection of HW bits to support FRC controllers on FTC bots.
ihartwig/hdmi-trident
HDMI breakout for CEC and ARC signals
ihartwig/ihartwig.github.io
Public site.
ihartwig/kicad-library
The schematic and 3D libraries supported by KiCad team. Note that the footprint libraries are the *.pretty repos themselves.
ihartwig/Marlin
Optimized firmware for RepRap 3D printers based on the Arduino platform.
ihartwig/mate-net-monitor
Baseboard PCBA for MATE Net monitoring with a Particle Boron
ihartwig/MAX3100Serial9B
Arduino library for serial communication using MAX3100 USART chip with 9-bit mode
ihartwig/PCBruler
A PCB Ruler created in KiCAD
ihartwig/pico-xpad
Raspberry Pi Pico Xinput focused Macropad / Gamepad
ihartwig/raspberrypi-debugger
ihartwig/rf-fun
ihartwig/romeo-basestation
DCC++ Base Station for DFRobot Romeo V2 (Arduino Leonardo)
ihartwig/romeo-opamp
Add the missing current sense shunt and opamp to DFRobot Romeo boards or other 3-pin analog inputs.
ihartwig/rpi-labio-basestation
DCC++ Compatible Base Station for RPi with LabIO interface hardware
ihartwig/sata-modular-backplane
Backplane for 6x SATA drive with power conversion
ihartwig/STM32L4R9I_ALT_GAUGE
ihartwig/XDG201-mini-carrier
Mini carrier board for XDG201 10G switch module