The Forth Foundation Library (FFL)
==================================
The Forth Foundation Library is a general purpose forth library. It gives you a
collection of words written in (ANS) Forth, in areas such as data types,
collections, development support, interfaces and compound modules. The library
is developed with gforth.
At the moment the library is still under development. The FFL library, the
example and test files are licensed under the GNU GPL.
Installation, Configuration And Testing
=======================================
gforth (Debian/Ubuntu)
----------------------
Step 1: install the library with the Debian package
a. Download and install the ffl-gforth_x.y.z-1_all.deb package
b. Start gforth
c. Enter: include ffl/frc.fs
d. If gforth doesn't report an error, the library is correctly installed.
Step 2: Configuration of the library
With the Debian package no further configuration is necessary.
Step 3: Test the library
The test scripts are installed in the /usr/share/ffl/x.y.z/test
directory. Due to ownership of those files (root), it is not
possible to run the tests directly in this directory, so ..
a. Create a temporary directory. For example: mkdir ~/ffl-test
b. Copy the test scripts to the temporary directory:
cp /usr/share/ffl/x.y.z/test/* ~/ffl-test
c. Change the current directory to the temporary directory:
cd ~/ffl-test
d. Enter: gforth ffl_test.fs -ab -c TEST --verbose --file=FILE input
(the command line arguments are for test purposes and have no real meaning,
enter them in the correct case)
e. The test script will tell you which modules are tested and if there
were any errors.
If you see: 'Forth Foundation Modules Test: 0 errors in xxxx tests.'
then all went well.
f. Don't forget to cleanup the temporary directory.
Some notes for the Debian package:
a. The library is installed in /usr/share/gforth/site-forth/ffl
b. The test scripts are installed in /usr/share/ffl/x.y.z/test
c. The examples are installed in /usr/share/ffl/x.y.z/examples
d. The documentation is installed in /usr/share/doc/ffl
Due to file ownership reasons the test scripts and examples can not
be started directly in the install directories, but must be
copied to temporary directories under your own account.
Tested with gforth-0.7.0.
gforth (non-windows)
---------------------
Gforth uses a search path to find sources. If you install the ffl library
in this search path, gforth can find the library.
Step 1: install the library in the search path:
a. Start gforth
b. Enter: fpath .fpath
c. Gforth will show all the directories where sources are searched
d. Select a search directory that ends with 'site-forth' and exists
e. Copy the 'ffl' directory (and its contents) from the package to
the selected directory
f. Start gforth again
g. Enter: include ffl/frc.fs
h. If gforth doesn't report an error, the library is correctly installed,
else repeat the steps, but select a different directory
Step 2: Configuration of the library
For gforth no futher configuration is necessary.
Step 3: Test the library
a. Change the current directory to the 'test' directory in the package
b. Enter: gforth ffl_test.fs -ab -c TEST --verbose --file=FILE input
(the command line arguments are for test purposes and have no real meaning,
enter them in the correct case)
c. The test script will tell you which modules are tested and if there
were any errors.
If you see: 'Forth Foundation Modules Test: 0 errors in xxxx tests.'
then all went well.
Tested with gforth-0.7.0.
gforth (windows)
----------------
Gforth uses a search path to find sources. If you install the ffl library
in this search path, gforth can find the library.
Step 1: Install the library in the search path:
a. Start gforth
b. Enter fpath .fpath
c. Gforth will show all the directories where sources are searched
d. If all shown directories start with '/usr', then gforths search
path is incorrect, else continue with j.
e. Determine where gforth is installed, this will normally be
'<drive>:\Program Files\gforth'
f. Add the environment variable: 'GFORTHPATH' with the value
'\Program Files\gforth:.'
(Environment variables can be added by: My Computer - Properties
- Advanced - Environment Variables)
g. Start gforth again
h. Enter fpath .fpath
i. Gforth should show '\Program Files\gforth' and '.'
j. Copy the 'ffl' directory (and its contents) from the package to
a search directory (except '.').
k. Start gforth again
l. Enter: include ffl/frc.fs
m. If gforth doesn't report an error, the library is correctly
installed, else repeat the steps but select a different directory
Step 2: Configuration of the library
For windows the 'end-of-line' word should be changed in the ffl/config.fs file,
so that it will return cr-lf. See the configuration chapter for more info about
the configuration items.
Step 3: Test the library
a. Start cmd
b. Change the current directory to the 'test' directory in the package
c. Enter: gforth ffl_test.fs -ab -c TEST --verbose --file=FILE input
(the command line arguments are for test purposes and have no real meaning,
enter them in the correct case)
d. The test script will tell you which modules are tested and if there
were any errors.
If you see: 'Forth Foundation Modules Test: 0 errors in xxxx tests.'
then all went well.
Tested with gforth-0.7.0.
bigforth
--------
Bigforth uses a search path to find sources. If you install the ffl library
in this search path, bigforth can always find the library.
Step 1: Install the library in the search path:
a. Start bigforth
b. Enter: path
c. Bigforth will show all the directories where sources are searched, separated
by a ';'
d. Select one of the search directories that exists, but not the '.'
directory
e. Copy the 'ffl' directory (and its contents) from the package to
the selected directory
f. Copy from the 'engines/bigforth' directory in the package the files
'config.fs' and 'make.fs' to the 'ffl' directory in the selected
directory, resulting in 'ffl/config.fs' and 'ffl/make.fs'.
g. Start bigforth again
h. Enter: include ffl/frc.fs
i. If bigforth doesn't report an error, (exists warnings are okee),
the library is correctly installed, else repeat the steps, but
select a different directory
Step 2: Configuration of the library:
For bigforth the 'end-of-line' configuration in the ffl/config.fs file
is set for Unix/Linux. If you install bigforth for an different OS, you
should change the 'end-of-line' word. See the configuration chapter for
more info about the configuration items.
Step 3: Test the library:
a. Change the current directory to the 'test' directory in the package
b. Enter: bigforth ffl_test.fs
c. The test script will tell you which modules are tested and if there
were any errors.
If bigforth only reports errors for the fwt module, then all went well.
Bigforth reports errors for the fwt module, due to missing alignment
code in this forth engine.
Tested with bigforth 2.3.1
pfe
---
PFE uses a search path to find sources. If you install the ffl library
in this search path, pfe can find the library.
Step 1: Install the library in the search path:
a. Start pfe
b. Enter: .status
c. After the item 'search path for source files' pfe lists the directories,
separated by ':', that are used as search path.
d. Select one of the search directories, but not the '.pfe' directory
e. Copy the 'ffl' directory (and its contents) from the package to the
selected directory
f. Copy from the 'engines/pfe' directory in the package the files
'config.fs' and 'make.fs' to the 'ffl' directory in the selected
directory, resulting in 'ffl/config.fs' and 'ffl/make.fs'.
g. Start pfe again
h. Enter: include ffl/frc.fs
i. If pfe doesn't report an error, the library is correctly installed,
else repeat the steps, with a different directory.
Step 2: Configuration of the library:
For pfe the 'end-of-line' configuration in the ffl/config.fs file
is set for Unix/Linux. If you install pfe for an different OS, you
should change the 'end-of-line' word. See the configuration chapter for
more info about the configuration items.
Step 3: Test the library:
a. Change the current directory to the 'test' directory in the package
b. Enter: pfe ffl_test.fs -ab -c TEST --verbose --file=FILE input
(the command line arguments are for test purposes and have no real meaning,
enter them in the correct case)
c. The test script will tell you which modules are tested and if there
were any errors.
If you see: 'Forth Foundation Modules Test: 0 errors in xxxx tests.'
then all went well.
Tested with pfe 0.33.70
Win32Forth
-----------
Win32Forth uses a search path to find sources. If you install the ffl
library in this search path, Win32Forth can find the library.
Step 1: Install the library in the search path:
a. Start Win32Forth
b. Enter: .fpath
c. This word shows first the 'Base paths' and after that the 'Search
paths'.
d. First select one directory of the 'base paths' and combine that
with one of the 'search paths'.
e. For example if you select 'c:\program files\win32forth' as base
path and 'SRC\LIB' as 'search path', you should copy the 'ffl'
directory (and its contents) from the package to the directory
'c:\program files\win32forth'.
f. Copy from the 'engines/Win32Forth' directory in the package
the files 'config.fs' and 'make.fs' to the 'ffl' directory in
the selected directory, resulting in 'ffl/config.fs' and
'ffl/make.fs'.
g. Start Win32Forth again
h. Enter: include ffl/frc.fs
i. If Win32Forth doesn't report an error (warnings are okee),
the library is correctly installed, else repeat the steps with
a different directory.
Step 2: Configuration of the library:
For Win32Forth no further configuration is necessary.
Step 3: Test the library:
a. Change the current directory to the 'test' directory in the package
b. Use an editor to remove the 'bye' from the 'ffl_test.fs' file in this
directory
c. Start Win32Forth.
d. Use in the window the 'chdir' word to move to the 'test' directory.
e. Use 'include ffl_test.fs' to run the tests.
f. The test script will tell you which modules are tested and if there
were any errors.
If you see: 'Forth Foundation Modules Test: 0 errors in xxxx tests.'
then all went well.
Tested with Win32Forth 6.12.0
minForth
--------
minForth doesn't use a search path, so you should copy the library or
create a link to the library in your forth working directory.
Step 1a: Install the library by creating a link to the library
(UNIX and friends):
a. Copy the 'ffl' directory (and its contents) from the package to
a freely chosen directory. For example '~/lib', '/usr/lib' or
'/usr/local/lib' resulting in '~/lib/ffl', '/usr/lib/ffl' or
'/usr/local/lib/ffl'.
b. Copy from the 'engines/minForth' directory in the package the
files 'config.fs' and 'make.fs' to the 'ffl' directory in your
chosen directory, resulting in '~/lib/ffl/config.fs' and
'~/lib/ffl/make.fs', etc.
c. Create in your forth working directory a symbolic link to the
chosen directory. The name of this link should be 'ffl' and the
target the chosen directory. For example: 'ln -s ~/lib/ffl ffl'
or 'ln -s /usr/lib/ffl ffl' or 'ln -s /usr/local/lib/ffl ffl'.
d. Start minForth
e. Enter: include ffl/frc.fs
f. If all is well, minForth should include the file.
Step 1b: Install the library by coping the library:
a. Copy the 'ffl' directory (and its contents) from the package to
your working forth directory.
b. Copy from the 'engines/minForth' directory in the package the
files 'config.fs' and 'make.fs' to the 'ffl' directory in your
forth working directory, resulting in 'ffl/config.fs' and
'ffl/make.fs'.
c. Start minForth
d. Enter: 'include ffl/frc.fs'
e. If all is well, minForth should include the file.
Step 2: Configuration of the library:
For minForth the 'end-of-line' configuration in the ffl/config.fs file
is set for Unix/Linux. If you install minForth for an different OS, you
should change the 'end-of-line' word. See the configuration chapter for
more info about the configuration items.
Step 3: Test the library:
a. For running the tests the minForth engine is configured too small. So
extend the engine by editing the kernel.mfc file from minForth. Change
in this file the NAMES to 512000, the HEAP to 640000, the LIMIT to 1000000,
the SPMAX to 256 and the RPMAX to 256.
b. Rebuild the minForth engine.
c. Copy this new engine (mf and mf.i) to the 'test' directory of the package.
Also make sure that in this directory the library is present by coping the
ffl or by creating a link to the library. (see above).
d. Start minForth
e. Enter: 'include ffl_test.fs'.
f. The test script will tell you which modules are tested and if there
were any errors.
If you see: 'Forth Foundation Modules Test: 0 errors in xxxx tests.'
then all went well.
Tested with minForth 1.5
iForth
------
iForth uses a search path to find sources. If you install the ffl library
in this search path, iForth can find the library.
Step 1: Install the library in the search path
a. Copy the 'ffl-x.y.z' directory (and its contents) to $IFORTH/include/ffl
( ending up as $IFORTH/include/ffl/ffl-x.y.z ).
b. Copy the contents of the '$IFORTH/include/ffl/ffl-x.y.z/ffl' directory to
$IFORTH/include/ffl
c. Copy from the 'engines/iForth' directory in the package the files
'config.fs' and 'make.fs' to the $IFORTH/include/ffl directory.
d. Start iForth
e. Enter: include ffl/frc.fs
f. If iForth doesn't report an error, the library is correctly
installed.
Step 2: Configuration of the library
For iForth no further configuration is necessary.
Step 3: Test the library
a. Use an editor to remove the 'bye' from the 'ffl_test.fs' file in the
'$IFORTH/include/ffl/ffl-x.y.z/test' directory.
b. Start iForth.
c. Use the 'cd' word to move to the '$IFORTH/include/ffl/ffl-x.y.z/test' directory
d. Do 'include ffl_test.fs' to run the tests.
e. The test script will tell you which modules are tested and if there
were any errors.
If you see: 'Forth Foundation Modules Test: 0 errors in xxxx tests.'
then all went well.
SP-Forth (windows)
------------------
SP-Forth uses a search path to find sources. If you install the ffl
library in this search path, SP-Forth can find the library.
Step 1: Install the library in the search path
a. Determine where the executable of SP-Forth is located on your system.
Normally this will be: x:\Program Files\SP-Forth with x the drive
letter where windows is installed.
b. Copy the 'ffl' directory (and its contents) to this directory, ending
up as: x:\Program Files\SP-Forth\ffl
c. Copy from the 'engines\spf' directory in the package the files 'config.fs'
and 'make.fs' to the x:\Program Files\SP-Forth\ffl directory.
d. Start spf4
e. Enter: include ffl/frc.fs
f. If SP-Forth is able to include the file, the library is correctly installed.
Step 2: Configuration of the library
For SP-Forth no further configuration is necessary.
Step 3: Test the library
a. Start a command or cmd window
b. Change the current directory to the 'test' directory in the package
c. Enter (including the quotes):
"\Program Files\sp-forth\spf4" ffl\config.fs ffl_test.fs
d. The test script will tell you which modules are tested and if there
were any errors.
If you see: 'Forth Foundation Modules Test: 0 errors in xxxx tests.'
then all went well.
Tested with SP-Forth 4.20
SP-Forth (linux)
------------------
SP-Forth uses a search path to find sources. If you install the ffl
library in this search path, SP-Forth can find the library.
Step 1: Install the library in the search path
a. Determine where the SP-Forth sources are located on your system.
For example: /usr/spforth4
b. Copy the 'ffl' directory (and its contents) to this directory, ending up
as /usr/spforth4/ffl
c. Copy from the 'engines\spf' directory in the package the files 'config.fs'
and 'make.fs' to the /usr/spforth4/ffl directory.
d. Start spf4
e. Enter: include ffl/frc.fs
f. If SP-Forth is able to include the file, the library is correctly installed.
Step 2: Configuration of the library
For SP-Forth no further configuration is necessary.
Step 3: Test the library
a. Change the current directory to the 'test' directory in the package
b. Enter: spf4 -ab -c TEST --verbose --file=FILE input
(the command line arguments are for test purposes and have no real meaning,
enter them in the correct case)
c. Spf4 will report error #-2003, that is okee.
d. Enter: ffl/config.fs
e. Enter: ffl_test.fs
f. The test script will tell you which modules are tested and if there
were any errors.
If you see: 'Forth Foundation Modules Test: 0 errors in xxxx tests.'
then all went well.
Tested with SP-Forth 4.20
lxf
---
lxf doesn't use a search path, so you should create a link to the library
in your forth working directory
Step 1: Install the library by creating a link to the library
a. Copy the 'ffl' directory (and its contents) from the package to
a freely chosen directory. For example '~/lib', '/usr/lib' or
'/usr/local/lib' resulting in '~/lib/ffl', '/usr/lib/ffl' or
'/usr/local/lib/ffl'.
b. Copy from the 'engines/lxf' directory in the package the
files 'config.fs' and 'make.fs' to the 'ffl' directory in your
chosen directory, resulting in '~/lib/ffl/config.fs' and
'~/lib/ffl/make.fs', etc.
c. Create in your forth working directory a symbolic link to the
chosen directory. The name of this link should be 'ffl' and the
target the chosen directory. For example: 'ln -s ~/lib/ffl ffl'
or 'ln -s /usr/lib/ffl ffl' or 'ln -s /usr/local/lib/ffl ffl'.
d. Start lxf
e. Enter: include ffl/frc.fs
f. If all is well, lxf should include the file.
Step 2: Configuration of the library
For lxf no further configuration is necessary.
Step 3: Test the library
a. Change the current directory to the 'test' directory in the package
b. Make sure that in this directory the library is present by creating a link
to the library. (see Step 1).
c. Enter: lxf include ffl_test.fs
d. The test script will tell you which modules are tested and if there
were any errors.
If you see: 'Forth Foundation Modules Test: 0 errors in xxxx tests.'
then all went well.
Tested with lxf 1.6
ntf
---
ntf doesn't use a search path, so you should copy the library to your forth
working directory.
Step 1: Install the library by copying the library
a. Copy the 'ffl' directory (and its contents) from the package to
your forth working directory.
b. Copy from the 'engines/ntf' directory in the package the
files 'config.fs' and 'make.fs' to the 'ffl' directory in your
working directory.
c. Start ntf
d. Enter: include ffl/frc.fs
e. If all is well, lxf should include the file.
Step 2: Configuration of the library
For ntf no further configuration is necessary.
Step 3: Test the library
a. Change the current directory to the 'test' directory in the package
b. Make sure that in this directory the library is present by copying the
library to this directory (See step 1).
c. Copy the ntf.exe to the test directory.
d. Enter: ntf include ffl_test.fs
e. The test script will tell you which modules are tested and if there
were any errors.
If you see: 'Forth Foundation Modules Test: 0 errors in xxxx tests.'
then all went well.
Tested with ntf 1.6
VFXForth (linux)
----------------
VFXForth doesn't use a search path, so you should create a link to the library
in your forth working directory
Step 1: Install the library by creating a link to the library
a. Copy the 'ffl' directory (and its contents) from the package to
a freely chosen directory. For example '~/lib', '/usr/lib' or
'/usr/local/lib' resulting in '~/lib/ffl', '/usr/lib/ffl' or
'/usr/local/lib/ffl'.
b. Copy from the 'engines/VFXForth' directory in the package the
files 'config.fs' and 'make.fs' to the 'ffl' directory in your
chosen directory, resulting in '~/lib/ffl/config.fs' and
'~/lib/ffl/make.fs', etc.
c. Create in your forth working directory a symbolic link to the
chosen directory. The name of this link should be 'ffl' and the
target the chosen directory. For example: 'ln -s ~/lib/ffl ffl'
or 'ln -s /usr/lib/ffl ffl' or 'ln -s /usr/local/lib/ffl ffl'.
d. Start vfxlin
e. Enter: include ffl/frc.fs
f. If all is well, VFXForth should include the file.
g. If vfxlin reports an error that the file Ndp387.fth could not
be included, the macro %vfxpath% is not correctly set.
Find the file by using the command:
find / -iname Ndp387.fth -print 2>/dev/null
This command shows the path to this file. The %vfxpath% macro
should be set with the path to the file till and including the
VfxForth directory. So if the path to the file is
/usr/share/doc/VfxForth/Lib/Ndp387.fth
then enter in vfxlin
c" /usr/share/doc/VfxForth" c" VFXPATH" $setmacro
Step 2: Configuration of the library
For VFXForth no further configuration is necessary.
Step 3: Test the library
a. Change the current directory to the 'test' directory in the package
b. Make sure that in this directory the library is present by creating a link
to the library. (see Step 1).
c. Enter: vfxlin include ffl_test.fs
d. The test script will tell you which modules are tested and if there
were any errors.
If you see: 'Forth Foundation Modules Test: 0 errors in xxxx tests.'
then all went well.
Tested with vfxlin 4.4
VFXForth (windows)
------------------
Due to the fact that I don't have access to VFXForth for windows, the
following instructions are indicative.
VFXForth doesn't use a search path, so you should copy the library to your forth
working directory.
Step 1: Install the library by copying the library
a. Copy the 'ffl' directory (and its contents) from the package to
your forth working directory.
b. Copy from the 'engines/VFXForth' directory in the package the
files 'config.fs' and 'make.fs' to the 'ffl' directory in your
working directory.
c. Start vfxwin
d. Enter: include ffl/frc.fs
e. If all is well, vfxwin should include the file.
Step 2: Configuration of the library
For vfxwin no further configuration is necessary.
Step 3: Test the library
a. Change the current directory to the 'test' directory in the package
b. Make sure that in this directory the library is present by copying the
library to this directory (See step 1).
c. Start vfxwin
d. Enter: include ffl_test.fs
e. The test script will tell you which modules are tested and if there
were any errors.
If you see: 'Forth Foundation Modules Test: 0 errors in xxxx tests.'
then all went well.
fina
----
Note: at this moment (2006-06-11) fina is not yet released, so any
installation and configuration directives are not possible. The config.fs
file for fina is also preliminary.
SwiftForth (linux)
------------------
SwiftForth doesn't use a search path, so you should create a link to the library in your forth working directory
a. Copy the 'ffl' directory (and its contents) from the package to
a freely chosen directory. For example '~/lib', '/usr/lib' or
'/usr/local/lib' resulting in '~/lib/ffl', '/usr/lib/ffl' or
'/usr/local/lib/ffl'.
b. Copy from the 'engines/SwiftForth' directory in the package the
files 'config.fs' and 'make.fs' to the 'ffl' directory in your
chosen directory, resulting in '~/lib/ffl/config.fs' and
'~/lib/ffl/make.fs', etc.
c. Create in your forth working directory a symbolic link to the
chosen directory. The name of this link should be 'ffl' and the
target the chosen directory. For example: 'ln -s ~/lib/ffl ffl'
or 'ln -s /usr/lib/ffl ffl' or 'ln -s /usr/local/lib/ffl ffl'.
d. Start sf
f. Enter: include ffl/frc.fs
g. If all is well, SwiftForth should include the file.
Step 2: Configuration of the library
For SwiftForth no further configuration is necessary.
Step 3: Test the library:
a. Change the current directory to the 'test' directory in the package
b. Make sure that in this directory the library is present by creating a link
to the library. (see Step 1).
c. Enter: sf ffl_test.fs -ab -c TEST --verbose --file=FILE input
d. The test script will tell you which modules are tested and if there
were any errors.
If you see: 'Forth Foundation Modules Test: 0 errors in xxxx tests.'
then all went well.
Tested with SwiftForth 3.3.2
Fails cpx_tests.fs : complex numbers stringify slightly differently
Fails fwt_test.fs : SwiftForth's ALIGN and ALIGNED are no-ops
SwiftForth (windows)
--------------------
SwiftForth doesn't use a search path, so you should copy the library to your forth working directory.
a. Copy the 'ffl' directory (and its contents) from the package to
a freely chosen directory.
b. Copy from the 'engines/SwiftForth' directory in the package the
files 'config.fs' and 'make.fs' to the 'ffl' directory in your
chosen directory.
c. Start sf
d. Enter: include ffl/frc.fs
e. If all is well, SwiftForth should include the file.
Step 2: Configuration of the library
For SwiftForth no further configuration is necessary.
Step 3: Test the library:
a. Change the current directory to the 'test' directory in the package
b. Copy the 'ffl' directory into the 'test' directory.
c. Edit ffl_test.fs to not end with BYE , if you want to see the output!
d. Enter: sf ffl_test.fs -ab -c TEST --verbose --file=FILE input
Or: \ForthInc\SwiftForth\bin\sf -ab -c TEST --verbose --file=FILE input
e. The test script will tell you which modules are tested and if there
were any errors.
If you see: 'Forth Foundation Modules Test: 0 errors in xxxx tests.'
then all went well.
Tested with SwiftForth 3.3.2
Fails arg_tests.fs
Fails cpx_tests.fs : complex numbers stringify slightly differently
Fails fwt_test.fs : SwiftForth's ALIGN and ALIGNED are no-ops
Fails jis_test.fs : \r\n gets translated to \n
Fails tos_test.fs : floats stringify slightly differently
Configuration
=============
At the moment there are four system setting:
end-of-line
This word defines the ascii end of line as a counted string. For unix this
is a linefeed, for windows/dos systems it is carriage return and linefeed. For
gforth, fina, iForth, SP-Forth and lxf/nft the end of line is supplied by
the forth engine, so no manual configuration necessary. For bigforth, pfe
and minForth the default is the unix end of line, for Win32Forth the default
is windows/dos.
You should change the 'end-of-line' word if the default is not correct for you.
Note: gforth returns for windows an incorrect value for end-of-line, so
if you use gforth on windows, you should change the 'end-of-line' word.
#bits/byte
This word defines the number of bits in a byte. The library queries the
forth environment for "address-unit-bits". If this is not present, the
value defaults to 8. In the unlikely event that your system does not
support the environment query and your system uses a different number of
bits in a byte, then you should change this word.
#bits/cell
This word defines the number of bits in a cell. The default is the number of
bits in a byte multiplied by the number of bytes in a cell.
#bits/char
This word defines the number of bits in a char. The default is the number of
bits in a byte multiplied by the number of bytes in a char.
Backwards compatibility
=======================
From version 0.6.0 to version 0.7.0 there is a backwards compatible problem
with the stringtable module (stt). In version 0.6.0 the strings were stored
in the table with the ," word, but this word is not standard enough between
forth engines. From version 0.7.0 on the word +" is used for storing strings
in the stringtable.
From version 0.5.0 to version 0.6.0 there is a backwards compatible problem
for all the structures in the library. Till version 0.6.0 the library was
using its own structure definition. From version 0.6.0 it uses the new ANS
structures.
Documentation
=============
In the directory 'html' there is the HTML documentation of the library. The
file 'index.html' contains an overview of all the modules in the library. In
the file 'words.html' all words of the library are alphabetically listed. In
the file 'manual.html' there is small manual. More information can be found
in the wiki on the website.
Porting to other forth systems
==============================
The library is developed on gforth and pfe. The intention is that only two
files are depending on the (ANS) forth system:
./ffl/config.fs
./ffl/make.fs
All other source files should only use ANS words or extensions that are
present on the forth engine or are defined in the config.fs.
If you change these files to make the library work on a particular forth
system, let me know, then I can add the changed files to the distribution.
Also if there are any specific details concerning installation or testing
for a particular forth system, let me know. I will add them to the README.
Bugs
====
Because the library is still beta it is not impossible that you will find
bugs. You can report them or any suggestions to https://github.com/irdvo/ffl/issues.
Enjoy,
Dick