Available os updates are only shown for 1/4 raspberries
Opened this issue · 3 comments
Checklist:
- I updated to the latest version available
- I checked that my MQTT broker is otherwise working
Release with the issue:
v1.8.5
Last working release (if known):
Hardware, Operating System, Python version:
I have four raspberries all running version 1.8.5 of RPi-Reporter:
- 1 B+, Python 3.9.2
- Zero W, (currently offline)
- 3 B, Python 3.9.2
- 4 B, Python 3.9.2
Description of problem:
Only on one of them, the 3B, RPi-Reporter returns the number of available OS updates.
Json of the "monitor" topic of pi-sprinkler (ux_pdates=0)
{"info": {"timestamp": "2023-10-09T10:16:08+02:00", "rpi_model": "RPi 1 ModelB+r1.2", "ifaces": "e", "host_name": "pi-sprinkler", "fqdn": "pi-sprinkler", "ux_release": "bullseye", "ux_version": "6.1.21+", "ux_updates": 0, "up_time": "36 days, 14:35", "up_time_secs": 3162900, "last_update": "2023-10-09T11:14:00+02:00", "fs_total_gb": 32, "fs_free_prcnt": 93, "fs_used_prcnt": 7, "networking": {"eth0": {"mac": "b8:27:eb:72:b6:ff", "rx_data": 0, "tx_data": 0}, "wlan0": {"IP": "192.168.0.76", "mac": "00:13:ef:20:29:7d", "rx_data": 32481, "tx_data": 20152}}, "drives": {"root": {"size_gb": 32, "used_prcnt": 7, "device": "/dev/root", "mount_pt": "/"}}, "memory": {"size_mb": 429, "free_mb": 326, "size_swap": 100, "free_swap": 95}, "mem_used_prcnt": 24, "cpu": {"hardware": "BCM2835", "model": "ARMv6-compatible processor rev 7 (v6l)", "number_cores": 2, "bogo_mips": "697.95", "serial": "000000000c72b6ff", "load_1min_prcnt": 5.5, "load_5min_prcnt": 16.5, "load_15min_prcnt": 17.5}, "throttle": ["throttled = 0x0", "Not throttled"], "temperature_c": 34.2, "temp_gpu_c": 34.2, "temp_cpu_c": 34.7, "reporter": "ISP-RPi-mqtt-daemon v1.8.5", "reporter_releases": "v1.8.5,v1.7.2,v1.7.3,v1.7.4,v1.8.3,v1.8.4", "report_interval": 5}}Output of "sudo apt update" on pi-sprinkler
pi@pi-sprinkler:/opt/RPi-Reporter-MQTT2HA-Daemon $ sudo apt update
Get:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease [15.0 kB]
Get:2 http://archive.raspberrypi.org/debian bullseye InRelease [23.6 kB]
Get:3 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages [13.2 MB]
Get:4 http://archive.raspberrypi.org/debian bullseye/main armhf Packages [314 kB]
Get:5 http://raspbian.raspberrypi.org/raspbian bullseye/non-free armhf Packages [106 kB]
Fetched 13.7 MB in 39s (347 kB/s)
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
40 packages can be upgraded. Run 'apt list --upgradable' to see them.
So in theory RPi-reporter should report 40 available OS updates. I guess it's a configuration problem, but I can't spot it. There is no obvious difference in the config.ini files between the machines. Only the mqtt hostname, base_topic and sensor_name are defined. All other options are at their default values (commented out).
Maybe a permission problem?
Python errors shown in the logs (if applicable):
There are no erros shown on any of the devices.
Additional information:
OK, that seems to be a bit more complicated. I just updated the raspberry 3B. Sudo apt update reported 44 available updates instead of the 29 shown by RPI-reporter. Now after running sudo apt upgrade, RPi-reporter still shows 29 available updates. Where does it get this value from?
and here
and right at the start where it checks for apt and a bit later where it sends.
Look at the bottom of the readme and run it in debug mode to see what it is seeing.
Thanks. I'll keep an eye on it. It still looks inconsistent here.