ironsheep/RPi-Reporter-MQTT2HA-Daemon

Reboot and shutdown buttons not working from Home Assistant.

mattlward opened this issue · 2 comments

mattlward commented

Checklist:

  • [x ] I updated to the latest version available
  • [x ] I checked that my MQTT broker is otherwise working

Release with the issue:
1.8.5
Last working release (if known):

Hardware, Operating System, Python version:
Pi 4, Raspbian GNU/Linux 10 (buster) armv7l, python3 3.7.3

Description of problem:
Reboot and shutdown buttons from HA do not work log results here:

Feb 09 17:09:28 ts-pi python3[715]: We trust you have received the usual lecture from the local System
Feb 09 17:09:28 ts-pi python3[715]: Administrator. It usually boils down to these three things:
Feb 09 17:09:28 ts-pi python3[715]:     #1) Respect the privacy of others.
Feb 09 17:09:28 ts-pi python3[715]:     #2) Think before you type.
Feb 09 17:09:28 ts-pi python3[715]:     #3) With great power comes great responsibility.
Feb 09 17:09:28 ts-pi python3[715]: sudo: no tty present and no askpass program specified
Feb 09 17:09:28 ts-pi sudo[996]: pam_unix(sudo:auth): conversation failed
Feb 09 17:09:28 ts-pi sudo[996]: pam_unix(sudo:auth): auth could not identify password for [daemon]
Feb 09 17:09:28 ts-pi sudo[996]:   daemon : user NOT in sudoers ; TTY=unknown ; PWD=/opt/RPi-Reporter-MQTT2HA-Daemon ; USER=root ; COMMAND=/sbin/shutdown -r now reboot rqst via MQTT

Run our report script 'genBugInfo' on your failing device and include the output here:

mattw@ts-pi:/opt/RPi-Reporter-MQTT2HA-Daemon $ more genBugInfo-240209-173041.lst

SCRIPT genBugInfo v1.1 run 24/02/09-17:30:41

----------------------------------------------------------------------

/bin/cat /etc/apt/sources.list | /bin/egrep -v '#'

deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi

/bin/cat /etc/apt/sources.list | /bin/egrep -v '#' | /usr/bin/awk '{ print $3 }' | /bin/grep . | /usr/bin/sort -u | head -1

buster

/bin/uname -r

5.10.103-v7l+

/bin/hostname -f

ts-pi.home

/usr/bin/uptime

17:30:41 up 26 min, 2 users, load average: 0.15, 0.11, 0.09

/sbin/ifconfig

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.21 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::248d:2b26:5dfe:cd3b prefixlen 64 scopeid 0x20
inet6 2601:240:8301:1460:8dbe:5a1:2482:7af prefixlen 64 scopeid 0x0
ether dc:a6:32:87:f7:4e txqueuelen 1000 (Ethernet)
RX packets 13859 bytes 1899355 (1.8 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 3601 bytes 526006 (513.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 1000 (Local Loopback)
RX packets 159 bytes 8905 (8.6 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 159 bytes 8905 (8.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether dc:a6:32:87:f7:4f txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

/sbin/ifconfig | /bin/egrep 'Link|flags|inet|ether' | /bin/egrep -v -i 'lo:|loopback|inet6|::1|127.0.0.1'

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.21 netmask 255.255.255.0 broadcast 192.168.1.255
ether dc:a6:32:87:f7:4e txqueuelen 1000 (Ethernet)
wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether dc:a6:32:87:f7:4f txqueuelen 1000 (Ethernet)

/sbin/route

Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default pfsense.home 0.0.0.0 UG 202 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 202 0 0 eth0

/bin/ls -l /var/log/dpkg.log /var/log/dpkg.log.1 2>/dev/null

-rw-r--r-- 1 root root 135643 Feb 9 16:37 /var/log/dpkg.log
-rw-r--r-- 1 root root 84206 Apr 13 2023 /var/log/dpkg.log.1

/bin/grep 'status installed' /var/log/dpkg.log /var/log/dpkg.log.1 2>/dev/null | sort | tail -1

/var/log/dpkg.log:2024-02-09 16:37:16 status installed python3-unidecode:all 1.0.23-1

/bin/df -m

Filesystem 1M-blocks Used Available Use% Mounted on
/dev/root 234470 4168 220729 2% /
devtmpfs 1764 0 1764 0% /dev
tmpfs 1925 0 1925 0% /dev/shm
tmpfs 1925 10 1916 1% /run
tmpfs 5 1 5 1% /run/lock
tmpfs 1925 0 1925 0% /sys/fs/cgroup
/dev/sda1 253 49 204 20% /boot
tmpfs 385 0 385 0% /run/user/109
tmpfs 385 1 385 1% /run/user/1004

/bin/df -m | /usr/bin/tail -n +2 | /bin/egrep -v 'tmpfs|boot'

/dev/root 234470 4168 220729 2% /

ls -l /opt/vc/bin/vcgencmd /usr/bin/vcgencmd

-rwxr-xr-x 1 root root 16452 May 9 2023 /opt/vc/bin/vcgencmd
lrwxrwxrwx 1 root root 20 May 9 2023 /usr/bin/vcgencmd -> /opt/vc/bin/vcgencmd

Python errors shown in the logs (if applicable):

Additional information:

mattlward commented

Got it working... thanks!