Coin Slot Unusual Pulse
Opened this issue · 2 comments
Hi, there. If I'm not mistaken, 1 piso = 1 pulse, 5 piso = 5 pulse etc. My issue encountered is when some static electricity detected like some device plugged to same outlet it detect 1 pulse. similar to just simply touching the ground of the device. Is someone encountered it, I know this is not software related but we can (i think) change the pulse setting to like 1 piso = 2pulse instead). Thanks!
Edit: I would like to also add, is it normal that the system registers "[MAC] Inserted coin X" X is sometimes 2,3,4,6,7,8,9 those pulses not registered as regular coin like 1,5,10 and 20
dapat may common grounds yung board mo at yung coinslot.
I mag connect ka din ng wire from coinslot ground papunta sa ground ng board
Sinubukan ko ito sa bare setup. ESP32 at coinslot lang common ground na din ground sa ESP=Coinslot=power supplier pero kapag tap ko lang daliri ko sa ground nag register as +1 coin every time