jbuehl/solaredge

RS485-1 and RS485-E configuration with LG battery

antoniolobefaro opened this issue · 2 comments

antoniolobefaro commented

Hi,
first of all I describe the system configuration.
there is a StorEdge connected electrically to a PV system and to a LG RESU CHEM battery.
On StorEdge, the RS485-1 is connected to LG storage and to an Energy meter that monitor the energy exchanged with energy provider. the protocol is Multi because of different devices connected.

the external module RS485-E is connected to an external device where i want to run the semonitor to capture data. on RS485-E the StorEdge is set as slave and the protocol is Solaredge.

the StorEdge is also connected via Ethernet and I'm able to see all data on the SolarEdge portal.

Well, I want to monitor the system locally, but semonitor, in the configuration described above, doesn't work.

Any idea? someone met the same case?

Thanks

felixmartens commented

Hello, Antonio,

Do you have any success with your Installationin the meantime? I'm working with a similar setup, trying to get passive network mode working(as my RS485-1 is connected to a second Single Phase Inverter).
Thanks for your answer

antoniolobefaro commented

I'm sorry, I wasn't able to manage the system only locally and at the end I managed it by remote commands with rest API