ph sensor
MrThiemann opened this issue · 0 comments
MrThiemann commented
hey,
First of all, thank you for this great post! it helps me a lot with my pool control!!
I have the same pH sensor as you, but have enormous difficulties integrating it with me.
I'm either missing it or it's not there: your code for the sensor.
I've really tried quite a few things.. with "attenuation"... or without. times on auto and now on 11db.
I once had the sensor at 3.3 V and now at 5 - but somehow that doesn't want to.
could you help me
- platform: adc
attenuation: 11db
pin: GPIO34
name: "PHSensor"
update_interval: 1s
unit_of_measurement: "pH"
icon: "mdi:water-percent"
# filters:
# - lambda: return (133.42*x*x*x - 255.86*x*x + 857.39*x)*0.5;
# - sliding_window_moving_average:
# window_size: 15
# send_every: 15
# - median:
# window_size: 7
# send_every: 4
# send_first_at: 3
# - calibrate_linear:
# - 0.70 -> 4.0 #voltage value when entering sensor in PH of 4 solution 0.73400
# - 1.051 -> 7.0 #voltage value when entering sensor in PH of 7 solution 1.05100