unable to upload firmware to rax200
paldier opened this issue · 1 comments
paldier commented
sudo ./nmrpflash -i enp0s8 -f RAX200-V1.0.0.30_1.0.35.chk -t 10
Advertising NMRP server on enp0s8 ... |
Received configuration request from 3c:37:86:cd:c7:be.
Sending configuration: 10.164.183.253/24.
Timeout while waiting for TFTP_UL_REQ.
CONF-REQ sent...Waiting for CONF-ACK...
Recv DEV-REGION(0x0000) ST-UP(0x00000000)
Device eth0: hwaddr 3C-37-86-CD-C7-BE, ipaddr 10.164.183.253, mask 255.255.255.0
gateway not set, nameserver not set
TFTP-UL-REQ sent...Waiting for TFTP-WRQ...
enter ui_cmd_tftpd
Start TFTP server for nmrp
Loading : ...
paldier commented
my bad, now it works.
sudo ./nmrpflash -i enp0s8 -f RAX200-V1.0.0.30_1.0.35.chk -t 20000