jerrod-lankford/GarageQTPi

Issues

• Unsupported on Bookworm / or Linux Kernel >= 5.11

  #52 opened a year ago by Jxck-S
  0

• device_class not set when using discovery

  #41 opened 4 years ago by dyde121
  3

• define unique_id

  #49 opened 3 years ago by hmoffatt
  0

• struct.error: cannot convert argument to integer

  #17 opened 7 years ago by WalterWampe
  7

• No longer active?

  #47 opened 4 years ago by craigInTx
  0

• HA isn't triggering the relay

  #37 opened 5 years ago by andystewart999
  3

• Install error!

  #34 opened 4 years ago by ameggs
  1

• Any chance for help running this prog ?

  #43 opened 4 years ago by rapi3
  6

• Error on first start

  #42 opened 4 years ago by SSSTREDDD
  1

• Relay is triggered on pi startup

  #35 opened 5 years ago by gouldner
  1

• Door opens on reboot/power up?

  #40 opened 4 years ago by vulcanjedi
  1

• is RPi3 really a min requirement?

  #39 opened 4 years ago by vulcanjedi
  6

• No connection through GPIO pins

  #26 opened 6 years ago by smeranda
  5

• Can't find installed libraries when running as a service

  #31 opened 5 years ago by bg1000
  7

• Break sensor support

  #30 opened 6 years ago by johntdyer
  0

• ValueError: Channel must be an integer

  #27 opened 6 years ago by JBenzie
  2

• Unable to run main.py

  #29 opened 6 years ago by 8osman
  6

• Incorrect protocol name

  #28 opened 6 years ago by Sleeepy2
  2

• Reports of not working with paho mqtt 1.3

  #23 opened 6 years ago by jerrod-lankford
  1

• Systemd service file should start python with -u parameter

  #21 opened 7 years ago by reibuehl
  3

• Wrong pin for right door in documentation

  #20 opened 7 years ago by reibuehl
  1

• Problem with service

  #19 opened 7 years ago by 4ordy
  7

• Parallel pushbutton didn't work anymore

  #18 opened 7 years ago by geraldhansen
  8

• Door Opening by Itself

  #16 opened 7 years ago by rsmith0906
  2

• Garage door commands should respect current state

  #14 opened 7 years ago by Curvin777
  2

• Rebooting/Starting up Raspberry Pi triggers relay

  #13 opened 7 years ago by Curvin777
  12

• Issue with re-connects

  #3 opened 7 years ago by sabooker
  55

• Question about Raspberry Pi Zero

  #11 opened 7 years ago by onlize
  2

• The door would not open or close.

  #10 opened 7 years ago by onlize
  8

• "closing" state

  #5 opened 7 years ago by Spartan-II-117
  2

• Some error when I try to sudo python main.py

  #9 opened 7 years ago by onlize
  4

• Cannot install

  #8 opened 7 years ago by onlize
  2

• Cannot install

  #7 opened 7 years ago by onlize
  0

• no option for NC switches

  #2 opened 8 years ago by Spartan-II-117
  5

• Not python3 compliant

  #1 opened 8 years ago by Spartan-II-117
  2