Replace motor mounts

Question

Replace motor mounts

jglovier opened this issue 9 years ago · 5 comments

During the post purchase inspection, Dwight discovered the rear motor mount bushing is worn/corroded/torn and should be replaced. He said it isn't urgent, but should get done. It's the reason you feel the car really pull back when you downshift. Donny said these are not hard to replace, and we could do it ourselves.

Some purchase options:

from Password JDM
~~from Andy's Auto Sport~~ (don't buy from Andy's!! See #33)
from Amazon
from Rahal (?)

Replacement instructions

YT video of left mount replacement
YT video of front lower mount replacement (and another and another)

Answer 1 · 2015-08-24T15:45:41.000Z

http://www.amazon.com/Hasport-EKSTK-Engine-Mount-Kit/dp/B000EDBJ3U/ref=sr_1_fkmr0_2?ie=UTF8&qid=1440430490&sr=8-2-fkmr0&keywords=hasport+U94A (or via Hasport)

Answer 2 · 2015-08-25T14:31:08.000Z

http://www.amazon.com/Innovative-Mounts-IMTB10050-60A-Billet-Replacement/dp/B00FMIPWMG/ref=sr_1_7?ie=UTF8&qid=1440512843&sr=8-7&keywords=innovative+mounts+civic+B10050

(also available from PasswordJDM), or directly from InnovativeMounts.com

NOTE The red bushings are the softest urethane (60A). Buy the black bushings (75A).

Answer 3 · 2015-09-21T15:09:44.000Z

Be sure to inspect front lower motor mount for damage, which is not included in the replacement mount kits.

Answer 4 · 2016-03-04T04:39:51.000Z

Ordered the Hasport mounts from Amazon.

Answer 5 · 2016-09-14T21:01:52.000Z

Dad and I did this a few weeks ago.