UDP in Reverse Mode Fails
Closed this issue · 2 comments
GoogleCodeExporter commented
I'm not sure if this is a known issue or something particular to my individual
setup here. Any insight would be appreciated.
What steps will reproduce the problem?
1. iperf3 -c host -u -R
What is the expected output? What do you see instead?
Though at least similar to the client->server test
What version of the product are you using? On what operating system?
Iperf3 3.0 (11-15-2013). Linux Ubuntu 3.11 kernel
Please provide any additional information below.
client -> server
Connecting to host mercury.psc.edu, port 5201
[ 4] local 128.182.160.131 port 56827 connected to 147.73.5.161 port 5201
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-1.00 sec 120 KBytes 983 Kbits/sec
[ 4] 1.00-2.00 sec 128 KBytes 1.05 Mbits/sec
[ 4] 2.00-3.00 sec 128 KBytes 1.05 Mbits/sec
[ 4] 3.00-4.00 sec 128 KBytes 1.05 Mbits/sec
[ 4] 4.00-5.00 sec 128 KBytes 1.05 Mbits/sec
[ 4] 5.00-6.00 sec 128 KBytes 1.05 Mbits/sec
[ 4] 6.00-7.00 sec 128 KBytes 1.05 Mbits/sec
[ 4] 7.00-8.00 sec 128 KBytes 1.05 Mbits/sec
[ 4] 8.00-9.00 sec 128 KBytes 1.05 Mbits/sec
[ 4] 9.00-10.00 sec 128 KBytes 1.05 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Jitter Lost/Total
Datagrams
[ 4] 0.00-10.00 sec 1.24 MBytes 1.04 Mbits/sec 0.036 ms 0/159 (0%)
[ 4] Sent 159 datagrams
iperf Done.
server <- client
Connecting to host mercury.psc.edu, port 5201
Reverse mode, remote host mercury.psc.edu is sending
[ 4] local 128.182.160.131 port 54054 connected to 147.73.5.161 port 5201
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-1.00 sec 8.00 KBytes 65.5 Kbits/sec
[ 4] 1.00-2.00 sec 0.00 Bytes 0.00 bits/sec
[ 4] 2.00-3.00 sec 0.00 Bytes 0.00 bits/sec
[ 4] 3.00-4.00 sec 0.00 Bytes 0.00 bits/sec
[ 4] 4.00-5.00 sec 0.00 Bytes 0.00 bits/sec
[ 4] 5.00-6.00 sec 0.00 Bytes 0.00 bits/sec
[ 4] 6.00-7.00 sec 0.00 Bytes 0.00 bits/sec
[ 4] 7.00-8.00 sec 0.00 Bytes 0.00 bits/sec
[ 4] 8.00-9.00 sec 0.00 Bytes 0.00 bits/sec
[ 4] 9.00-10.00 sec 0.00 Bytes 0.00 bits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Jitter Lost/Total
Datagrams
[ 4] 0.00-10.00 sec 8.00 KBytes 6.55 Kbits/sec 638.223 ms 0/1 (0%)
[ 4] Sent 1 datagrams
iperf Done.
Original issue reported on code.google.com by rapi...@gmail.com
on 5 Dec 2013 at 5:57
GoogleCodeExporter commented
I think this was fixed recently.
Can you try the latest version?
hg clone http://code.google.com/p/iperf/
Original comment by bltier...@es.net
on 6 Dec 2013 at 2:11
GoogleCodeExporter commented
Original comment by bltier...@es.net
on 16 Dec 2013 at 4:21
- Changed state: Fixed