jlas1/Klicky-Probe
Microswitch probe with magnetic attachement, primarily aimed at CoreXY 3d printers
GPL-3.0
Issues
- 1
Error evaluating 'gcode_macro _User_Variables:gcode': jinja2.exceptions.UndefinedError: 'dict object' has no attribute 'x_offset'
#250 opened by blackmikeee - 0
Switchwire Servo movement on Extruder movement
#264 opened by Nachbar76 - 1
Lasted update to Klicky macros causes an edge case where the toolhead can crash
#263 opened by jmeier5261 - 2
EBB36 wiring
#214 opened by Bumblebiber - 0
Probe_Lock will not working what so ever
#260 opened by DragonFlyer007 - 0
Dock QGL and Home
#259 opened by MattiaFontanaErrepinet - 0
- 2
Klipper Macros and Sensorless Homing
#256 opened by seanmccully - 0
long stl and suggest config
#255 opened by tjengbudi - 1
Servo dock moves while docking probe
#252 opened by gixxerfool - 0
Klack Probe macros for the Ender 3 (dock height changes on me) Neptune 4 plus
#254 opened by KA009onPC - 1
Step files for Docks
#253 opened by BenJBachler - 0
- 10
- 0
- 4
is it possible for probe to stay undock on toolhead after homing all axis?
#246 opened by drumstick77 - 0
- 5
- 1
Documentation
#239 opened by shkup - 0
UnklickyNG doesn't work with 2.7mm magnets
#241 opened by ressu - 1
Add support for slideswipe and similar probes
#240 opened by HitLuca - 2
Expand for rapido uhf
#226 opened by Bersaker - 1
- 0
KlickyNG for Voron V0.2r1 niggles
#237 opened by bozzzzo - 1
Homing Issue with Macros
#236 opened by danilosousadba - 0
Please make a better instruction for the macro settings, or where to find instructions
#235 opened by Hoeby - 0
Edge case where the probe crashes into dock
#234 opened by propeller3D - 0
Certain Events & Probing Error Leaves Potential For Starting Next Print With Probe Still Attached & Unchecked
#230 opened by 3DPrintDemon - 0
Homing issues
#232 opened by v0nsild - 1
Dock if probe is already connected before homing z
#231 opened by dderg - 0
Out of Range Issue when homing.
#229 opened by DIY-75 - 0
Servo angle rounded up when docking?
#228 opened by feaver12 - 1
- 0
- 1
Voron v0 long probe not working
#221 opened by mkomuc - 1
Probe Head crashes into Probe holder
#224 opened by MCCatboy - 2
- 2
Klicky causing Y to not home
#222 opened by 53Aries - 3
- 0
FR Multi Probe, additional heights and speeds
#220 opened by Avatarsia - 2
Parts list for voron 0.2r1 ?
#206 opened by bginvestor - 3
- 1
Simple Guide fro Voron Trident
#218 opened by pasha4ur - 2
- 1
Confusing zip files in the repo
#213 opened by WizardUli - 0
Probe_Calibrate issues
#212 opened by Cipher43 - 1
Not taking decimal value on dock location 5.8 = 5.0
#203 opened by PhilBaz - 0
- 1
- 1
V0 needs to support Hot end Bambu X1C
#204 opened by zch6348135