Since update to Build: 20240317 : Lots of Warnings : host: errors: protocol
vbueschken opened this issue · 2 comments
Description
Since update to Build: 20240317 : Lots of Warnings : host: errors: protocol
Configuration:
scanconfig: true
loglevel_all: notice
mqtttopic: ebusd
mqttint: /etc/ebusd/mqtt-hassio.cfg
mqttjson: true
network_device: ens:192.168.178.98:9999
latency: 10
accesslevel: ""*""
configpath: https://cfg.ebusd.eu/
mqttvar: filter-direction=r|u|^w
Actual behavior
In Addition to the warnings in the adapter Log File aobout 50% of the Sensors from ebusd700 are 'not available' anymore
Sensors from ebusd bai looks OK
Expected behavior
Sensor data should be available
ebusd version
23.3
ebusd arguments
see description
Operating system
other
CPU architecture
x64
Dockerized
None
Hardware interface
Adapter Shield v5 via WiFi
Related integration
TCP (cmdline client like ebusctl or netcat)
Logs
Adapter Log FIle:
Warning: host: errors: protocol (~every 30 sec)
Some Error Messages from the Home Assistant AddOn:
2024-03-25 15:24:02.096 [bus error] poll bai CounterStartAttempts3 failed: ERR: wrong symbol received
2024-03-25 15:23:44.117 [bus error] poll 700 z3ValveStatus failed: ERR: wrong symbol received
2024-03-25 15:23:26.101 [bus error] poll 700 z3QuickVetoTemp failed: ERR: SYN received
2024-03-25 15:23:14.069 [bus error] poll 700 z3OpMode failed: ERR: SYN received
2024-03-25 15:22:56.139 [bus error] poll 700 z3DayTemp failed: ERR: wrong symbol received
2024-03-25 15:23:02.085 [bus error] poll 700 z3HolidayTemp failed: ERR: SYN received
[bus error] poll bai ModulationTempDesired failed: ERR: wrong symbol received
I am having the same issue. It only started to occur for me after updating to the latest firmware. This issue didn't exist for me before the upgrade.
obviously no ebusd issue in the first place, so closing here. feel free to open in https://github.com/john30/ebusd-esp32 .
would help to know which version you were running before the update