Dragon UHF fit test
Closed this issue · 1 comments
jon-harper commented
I've added to testing a mount for the Phaetus Dragon UHF. Link to STL is in the BOM below.
Bill of Materials
| Parts | Qty |
|---|---|
hotend_dragon_uhf.stl |
1 |
| Phaetus Dragon UHF | 1 |
| Fan, 40mm x 10mm | 1 |
| M2.5-0.45 x 8mm SHCS | 4 |
| M3-0.5 x 6mm SHCS | 4 |
| M3-0.5 x 12mm SHCS | 4 |
| Heat Set Insert, M3x5x4 | 8 |
jon-harper commented
Closing this, as multiple folks are running this version.