jon-harper/clock-3

Measure length and area items in BOM

Closed this issue · 1 comments

jon-harper commented

Length:

  • Wiring (almost 100m!)
  • Wire looms
  • PTFE tube: 1.7m
  • Polyurethane Foam Weatherseal: 1.2m
  • Silicone Tubing: 1m
  • Belts: 4m

Area:

  • Insulation (1x 4'x8' sheet if uncut, 2 if sheets had to be cut for travel)
  • Paneling (2x 4'x5' sheets of 12mm plywood, 1x 4'x5' sheet of 5mm acrylic, and about 24"x6" of 6mm plywood)
jon-harper commented
  • All wire runs will now have an ID to aid tracking and assembly.
  • Wire IDs are based on component IDs
  • IDs not involving the PSU are tailed with a letter code indicating distance from MCU, e.g. HE-A is MCU->chamber panel mount, HE-B is from the right chamber panel to the tooldhead panel.
  • There are a few third level connectors with a -C. The modified BLTouch wire is ABL-C and connects to ABL-B. Likewise, I included a -C for LED strips. Even though they are soldered on, they still have to be made by the builder.