[Bug]: M5 Stick Setup Page causes reboot while connected to wifi
Closed this issue · 2 comments
What happened?
Edited as I realized part of what I was seeing is a known thing.
Seemingly connected in the arduino serial monitor, but not showing up in tally arbiter as a listener. Serial log below. The page holds on "booting....
SSID: RSC-ProdVideo"
May be unrelated, but the reboot button also doesnt seem to work like it should? can only be held for off/on
Version
2.0.16
Distribution
Desktop
OS
MacOS
What browsers are you seeing the problem on?
No response
If applicable, What Listener Clients are You Using?
M5 Stick
TallyArbiter configuration
No response
Relevant log output
Initializing M5StickC+.
�M5StickCPlus initializing...OK
Tally Arbiter M5StickC+ Listener Client booting.
Listener device name: m5StickC-615753408229708
Reading preferences
Setting TallyArbiter host as172.28.0.89
Setting TallyArbiter port as4455
Connecting to SSID:
*wm:AutoConnect
*wm:Connecting to SAVED AP: RSC-ProdVideo
*wm:connectTimeout not set, ESP waitForConnectResult...
*wm:AutoConnect: SUCCESS
*wm:STA IP Address: 172.28.0.237
connected...yay :)
Connecting to Tally Arbiter host: 172.28.0.89
Connected to Tally Arbiter server.
DeviceId: unassignedError stacktrace (if applicable)
No response
Hello there maalaval 👋
Welcome to TallyArbiter!
Thank you for opening your first issue for the Tally Arbiter project. Tally Arbiter fosters an open and welcoming environment for all our contributors. Please adhere to our Code Of Conduct.
If you have more to contribute to this issue, please comment down below! We will try to get back to you as soon as we can.
So I just cant read, this is a known issue already answered, I just missed it as I was bogged down by other issues that were happening overtop.
Ignore this!