Is m/s2 conversion correct
Opened this issue · 0 comments
jansierakowski commented
Hi,
I am getting 0.1 m/s^2 on the z-axis while x and y are 0 m/s^2 while the IMU is on the table. Is this Z value correct? It should be around 9.81 m/s^2.
Opened this issue · 0 comments
Hi,
I am getting 0.1 m/s^2 on the z-axis while x and y are 0 m/s^2 while the IMU is on the table. Is this Z value correct? It should be around 9.81 m/s^2.