DMA channel assigned to different map

[shrekisbeatif]

using generic 3.5 inch (http://www.lcdwiki.com/3.5inch_RPi_Display)
cmake commands:

$ cmake -DWAVESHARE35B_ILI9486=ON -DSPI_BUS_CLOCK_DIVISOR=30 -DDISPLAY_CROPPED_INSTEAD_OF_SCALING=ON -DDISPLAY_BREAK_ASPECT_RATIO_WHEN_SCALING=ON -DDISPLAY_ROTATE_180_DEGREES=
ON ..

error:

pi@raspberrypi:/fbcp-ili9341/build $ sudo ./fbcp-ili9341
bcm_host_get_peripheral_address: 0x3f000000, bcm_host_get_peripheral_size: 16777216, bcm_host_get_sdram_address: 0xc0000000
BCM core speed: current: 250000000hz, max turbo: 250000000hz. SPI CDIV: 30, SPI max frequency: 8333333hz
Allocated DMA channel 7
Allocated DMA channel 1
Enabling DMA channels Tx:7 and Rx:1
DMA hardware register file is at ptr: 0x75c7d000, using DMA TX channel: 7 and DMA RX channel: 1
DMA hardware TX channel register file is at ptr: 0x75c7d700, DMA RX channel register file is at ptr: 0x75c7d100
DMA RX channel 1 was assigned another peripheral map 5!
DMA channel 0 has peripheral map 0 (is lite channel: 0, currently active: 0, current control block: (nil))
DMA channel 1 has peripheral map 5 (is lite channel: 0, currently active: 1, current control block: 0xff536860)
DMA channel 2 has peripheral map 13 (is lite channel: 0, currently active: 1, current control block: (nil))
DMA channel 3 has peripheral map 17 (is lite channel: 0, currently active: 1, current control block: (nil))
DMA channel 4 has peripheral map 0 (is lite channel: 0, currently active: 0, current control block: (nil))
DMA channel 5 has peripheral map 0 (is lite channel: 0, currently active: 0, current control block: (nil))
DMA channel 6 has peripheral map 13 (is lite channel: 0, currently active: 1, current control block: (nil))
DMA channel 7 has peripheral map 0 (is lite channel: 1, currently active: 0, current control block: (nil))
DMA channel 8 has peripheral map 0 (is lite channel: 1, currently active: 0, current control block: (nil))
DMA channel 9 has peripheral map 0 (is lite channel: 1, currently active: 0, current control block: (nil))
DMA channel 10 has peripheral map 0 (is lite channel: 1, currently active: 0, current control block: (nil))
DMA channel 11 has peripheral map 0 (is lite channel: 1, currently active: 0, current control block: (nil))
DMA channel 12 has peripheral map 0 (is lite channel: 1, currently active: 0, current control block: (nil))
DMA channel 13 has peripheral map 0 (is lite channel: 1, currently active: 0, current control block: (nil))
DMA channel 14 has peripheral map 0 (is lite channel: 1, currently active: 0, current control block: (nil))
DMA RX channel was assigned another peripheral map!
pi@raspberrypi:/fbcp-ili9341/build $

[joecoolish]

Did you ever get this working? I'm in the same boat