Case lights switch off after booting up printer
norris108 opened this issue · 2 comments
norris108 commented
Before I installed klipper-led_effect, my case lights turned on and stayed on after booting up
Since installing klipper-led_effect, my case lights turn on and a second later switch off after booting up
Is this by design?
I'm using Klippain and have this in overrides.cfg
:
#-------------------------#
# CASE LIGHTS #
#-------------------------#
[neopixel caselight]
pin: CASELIGHT_NEOPIXEL
chain_count: 39
initial_RED: 1.0
initial_GREEN: 1.0
initial_BLUE: 1.0
julianschill commented
Make sure, you don't have any effects on autostart.
julianschill commented
Fixed by 71d8b30