Feedback
AndyTaylorTweet opened this issue · 10 comments
DMR2NXDN - Works great, also have it working via DMRGateway too, no issues here, occasional ring buffer issues but that may also be happening on the NXDNGateway, I have not looked.
DMR2YSF - Can you do anything to add the ability to request reflector changes based on the DMR TG?
YSF2NXDN/YSF2DMR/YSF2P25 - All work nicely, again - any way to choose the target TG from the YSF radio?
Over-all - oustanding work, and all pulled into Pi-Star apart from NXDN2DMR
Hi Andy, thank you for add DMR2YSF and DMR2NXDN very quickly.
I will add to DMR2YSF (I think soon) the reflector selection using DMR TG, probably using a txt file with TG <-> Reflector mapping.
Regarding YSF2NXDN/YSF2DMR/YSF2P25, all they can select the target TG using the radio, but must be connected directly to MMDVMHost. This is because YSFGateway processes all Wires-X first. I think we need a large modification to YSFGateway for a better integration of all these programs.
For DMR2YSF;
In case it helps I already have FCS and YSF host files:
http://www.pistar.uk/downloads/YSF_Hosts.txt
http://www.pistar.uk/downloads/FCS_Hosts.txt
you may consider mapping all FCS to 99nnn to keep them all 5 digit numbers (I'd find that handy), because then I can keep my DMRGateway setup (7nnnnn is forwarded to DMR2YSF on Pi-Star), although we can always work with whatever you end up with :)
As for the YSF2xxx, no great ideas with those yet :)
Hi Andy, finally I decided to add TGList support for DMR2YSF, this will give more flexibility for the users. Please check the new MMDVM_CM version.
Regards,
Andy CA6JAU
Thank you Andy, I'll pull those in over the next couple of days.
Here is a DMR map for every YSF destination:
http://www.pistar.uk/downloads/TGList_YSF.txt
Not sure if the FCS will work yet - I'll be testing that shortly.
Looking at your list, you can not use "names" for FCS reflectors, you need to use IDs (numbers) also.
The current YSFGateway uses the names and not the numbers to connect; I may have to just remove the FCS refs for now - those dong have numbers.
While you work that out - I will suppress the FCS hosts from the list - at least that makes it usable.
Hi Andy, you can use your original "TGList_YSF.txt" file for DMR2YSF, now will recognize correctly the FCS rooms.