k2-fsa/sherpa-ncnn

请问我在pip install sherpa-ncnn时出现了一下问题是什么原因呀？

yy123hd opened this issue · 21 comments

yy123hd commented

Defaulting to user installation because normal site-packages is not writeable
Collecting sherpa-ncnn
Using cached sherpa-ncnn-2.1.7.tar.gz (78 kB)
Preparing metadata (setup.py) ... done
Requirement already satisfied: numpy in c:\users\jun\appdata\roaming\python\python39\site-packages (from sherpa-ncnn) (1.26.3)
Building wheels for collected packages: sherpa-ncnn
Building wheel for sherpa-ncnn (setup.py) ... error
error: subprocess-exited-with-error

× python setup.py bdist_wheel did not run successfully.
│ exit code: 1
╰─> [65 lines of output]
running bdist_wheel
running build
running build_py
creating build
creating build\lib.win-amd64-cpython-39
creating build\lib.win-amd64-cpython-39\sherpa_ncnn
copying sherpa-ncnn\python\sherpa_ncnn\recognizer.py -> build\lib.win-amd64-cpython-39\sherpa_ncnn
copying sherpa-ncnn\python\sherpa_ncnn_init_.py -> build\lib.win-amd64-cpython-39\sherpa_ncnn
running build_ext
Setting PYTHON_EXECUTABLE to D:\Anaconda3\python.exe
build command is:

           cmake -DCMAKE_BUILD_TYPE=Release -DPYTHON_EXECUTABLE=D:\Anaconda3\python.exe -DCMAKE_INSTALL_PREFIX=C:\Users\JUN\AppData\Local\Temp\pip-i

nstall-68su60kj\sherpa-ncnn_653f2e764cf846c182b265c4fef5c5bf\build\lib.win-amd64-cpython-39\sherpa_ncnn -DBUILD_SHARED_LIBS=ON -DSHERPA_NCNN_ENABLE_PY
THON=ON -DSHERPA_NCNN_ENABLE_PORTAUDIO=OFF -B build\temp.win-amd64-cpython-39\Release -S C:\Users\JUN\AppData\Local\Temp\pip-install-68su60kj\sherpa-n
cnn_653f2e764cf846c182b265c4fef5c5bf
cmake --build build\temp.win-amd64-cpython-39\Release --target install --config Release -- -m

  'cmake' 不是内部或外部命令，也不是可运行的程序
  或批处理文件。
  Traceback (most recent call last):
    File "<string>", line 2, in <module>
    File "<pip-setuptools-caller>", line 34, in <module>
    File "C:\Users\JUN\AppData\Local\Temp\pip-install-68su60kj\sherpa-ncnn_653f2e764cf846c182b265c4fef5c5bf\setup.py", line 42, in <module>
      setuptools.setup(
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\__init__.py", line 103, in setup
      return distutils.core.setup(**attrs)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\core.py", line 185, in setup
      return run_commands(dist)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\core.py", line 201, in run_commands
      dist.run_commands()
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\dist.py", line 969, in run_commands
      self.run_command(cmd)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\dist.py", line 963, in run_command
      super().run_command(command)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\dist.py", line 988, in run_command
      cmd_obj.run()
    File "D:\Anaconda3\lib\site-packages\wheel\bdist_wheel.py", line 299, in run
      self.run_command('build')
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\cmd.py", line 318, in run_command
      self.distribution.run_command(command)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\dist.py", line 963, in run_command
      super().run_command(command)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\dist.py", line 988, in run_command
      cmd_obj.run()
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\command\build.py", line 131, in run
      self.run_command(cmd_name)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\cmd.py", line 318, in run_command
      self.distribution.run_command(command)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\dist.py", line 963, in run_command
      super().run_command(command)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\dist.py", line 988, in run_command
      cmd_obj.run()
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\command\build_ext.py", line 89, in run
      _build_ext.run(self)
    File "D:\Anaconda3\lib\site-packages\Cython\Distutils\old_build_ext.py", line 186, in run
      _build_ext.build_ext.run(self)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\command\build_ext.py", line 345, in run
      self.build_extensions()
    File "D:\Anaconda3\lib\site-packages\Cython\Distutils\old_build_ext.py", line 195, in build_extensions
      _build_ext.build_ext.build_extensions(self)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\command\build_ext.py", line 467, in build_extensions
      self._build_extensions_serial()
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\command\build_ext.py", line 493, in _build_extensions_ser

ial
self.build_extension(ext)
File "C:\Users\JUN\AppData\Local\Temp\pip-install-68su60kj\sherpa-ncnn_653f2e764cf846c182b265c4fef5c5bf\cmake\cmake_extension.py", line 93, in b
uild_extension
raise Exception("Failed to configure sherpa")
Exception: Failed to configure sherpa
[end of output]

note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for sherpa-ncnn
Running setup.py clean for sherpa-ncnn
Failed to build sherpa-ncnn
Installing collected packages: sherpa-ncnn
Running setup.py install for sherpa-ncnn ... error
error: subprocess-exited-with-error

× Running setup.py install for sherpa-ncnn did not run successfully.
│ exit code: 1
╰─> [80 lines of output]
running install
C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools_distutils\cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is depr
ecated.
!!

          ********************************************************************************
          Please avoid running ``setup.py`` directly.
          Instead, use pypa/build, pypa/installer or other
          standards-based tools.
 
          See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details.
          ********************************************************************************
 
  !!
    self.initialize_options()
  running build
  running build_py
  creating build
  creating build\lib.win-amd64-cpython-39
  creating build\lib.win-amd64-cpython-39\sherpa_ncnn
  copying sherpa-ncnn\python\sherpa_ncnn\recognizer.py -> build\lib.win-amd64-cpython-39\sherpa_ncnn
  copying sherpa-ncnn\python\sherpa_ncnn\__init__.py -> build\lib.win-amd64-cpython-39\sherpa_ncnn
  running build_ext
  Setting PYTHON_EXECUTABLE to D:\Anaconda3\python.exe
  build command is:
 
           cmake -DCMAKE_BUILD_TYPE=Release -DPYTHON_EXECUTABLE=D:\Anaconda3\python.exe -DCMAKE_INSTALL_PREFIX=C:\Users\JUN\AppData\Local\Temp\pip-i

nstall-68su60kj\sherpa-ncnn_653f2e764cf846c182b265c4fef5c5bf\build\lib.win-amd64-cpython-39\sherpa_ncnn -DBUILD_SHARED_LIBS=ON -DSHERPA_NCNN_ENABLE_PY
THON=ON -DSHERPA_NCNN_ENABLE_PORTAUDIO=OFF -B build\temp.win-amd64-cpython-39\Release -S C:\Users\JUN\AppData\Local\Temp\pip-install-68su60kj\sherpa-n
cnn_653f2e764cf846c182b265c4fef5c5bf
cmake --build build\temp.win-amd64-cpython-39\Release --target install --config Release -- -m

  'cmake' 不是内部或外部命令，也不是可运行的程序
  或批处理文件。
  Traceback (most recent call last):
    File "<string>", line 2, in <module>
    File "<pip-setuptools-caller>", line 34, in <module>
    File "C:\Users\JUN\AppData\Local\Temp\pip-install-68su60kj\sherpa-ncnn_653f2e764cf846c182b265c4fef5c5bf\setup.py", line 42, in <module>
      setuptools.setup(
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\__init__.py", line 103, in setup
      return distutils.core.setup(**attrs)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\core.py", line 185, in setup
      return run_commands(dist)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\core.py", line 201, in run_commands
      dist.run_commands()
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\dist.py", line 969, in run_commands
      self.run_command(cmd)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\dist.py", line 963, in run_command
      super().run_command(command)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\dist.py", line 988, in run_command
      cmd_obj.run()
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\command\install.py", line 79, in run
      return orig.install.run(self)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\command\install.py", line 697, in run
      self.run_command('build')
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\cmd.py", line 318, in run_command
      self.distribution.run_command(command)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\dist.py", line 963, in run_command
      super().run_command(command)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\dist.py", line 988, in run_command
      cmd_obj.run()
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\command\build.py", line 131, in run
      self.run_command(cmd_name)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\cmd.py", line 318, in run_command
      self.distribution.run_command(command)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\dist.py", line 963, in run_command
      super().run_command(command)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\dist.py", line 988, in run_command
      cmd_obj.run()
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\command\build_ext.py", line 89, in run
      _build_ext.run(self)
    File "D:\Anaconda3\lib\site-packages\Cython\Distutils\old_build_ext.py", line 186, in run
      _build_ext.build_ext.run(self)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\command\build_ext.py", line 345, in run
      self.build_extensions()
      raise Exception("Failed to configure sherpa")
  Exception: Failed to configure sherpa
  [end of output]

note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure

× Encountered error while trying to install package.
╰─> sherpa-ncnn

note: This is an issue with the package mentioned above, not pip.
hint: See above for output from the failure.

csukuangfj commented

先运行

pip install cmake

然后继续

yy123hd commented

已经运行了

csukuangfj commented

还报错么

yy123hd commented

对的，还是报错

csukuangfj commented

报什么错误呢

yy123hd commented

Defaulting to user installation because normal site-packages is not writeable
Collecting sherpa-ncnn
Using cached sherpa-ncnn-2.1.7.tar.gz (78 kB)
Preparing metadata (setup.py) ... done
Requirement already satisfied: numpy in c:\users\jun\appdata\roaming\python\python39\site-packages (from sherpa-ncnn) (1.26.3)
Building wheels for collected packages: sherpa-ncnn
Building wheel for sherpa-ncnn (setup.py) ... error
error: subprocess-exited-with-error

× python setup.py bdist_wheel did not run successfully.
│ exit code: 1
╰─> [65 lines of output]
running bdist_wheel
running build
running build_py
creating build
creating build\lib.win-amd64-cpython-39
creating build\lib.win-amd64-cpython-39\sherpa_ncnn
copying sherpa-ncnn\python\sherpa_ncnn\recognizer.py -> build\lib.win-amd64-cpython-39\sherpa_ncnn
copying sherpa-ncnn\python\sherpa_ncnn_init_.py -> build\lib.win-amd64-cpython-39\sherpa_ncnn
running build_ext
Setting PYTHON_EXECUTABLE to D:\Anaconda3\python.exe
build command is:

           cmake -DCMAKE_BUILD_TYPE=Release -DPYTHON_EXECUTABLE=D:\Anaconda3\python.exe -DCMAKE_INSTALL_PREFIX=C:\Users\JUN\AppData\Local\Temp\pip-i

nstall-985i10gf\sherpa-ncnn_ba8b4b28c1e341d5b0c5c9024ca193fc\build\lib.win-amd64-cpython-39\sherpa_ncnn -DBUILD_SHARED_LIBS=ON -DSHERPA_NCNN_ENABLE_PY
THON=ON -DSHERPA_NCNN_ENABLE_PORTAUDIO=OFF -B build\temp.win-amd64-cpython-39\Release -S C:\Users\JUN\AppData\Local\Temp\pip-install-985i10gf\sherpa-n
cnn_ba8b4b28c1e341d5b0c5c9024ca193fc
cmake --build build\temp.win-amd64-cpython-39\Release --target install --config Release -- -m

  'cmake' 不是内部或外部命令，也不是可运行的程序
  或批处理文件。
  Traceback (most recent call last):
    File "<string>", line 2, in <module>
    File "<pip-setuptools-caller>", line 34, in <module>
    File "C:\Users\JUN\AppData\Local\Temp\pip-install-985i10gf\sherpa-ncnn_ba8b4b28c1e341d5b0c5c9024ca193fc\setup.py", line 42, in <module>
      setuptools.setup(
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\__init__.py", line 103, in setup
      return distutils.core.setup(**attrs)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\core.py", line 185, in setup
      return run_commands(dist)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\core.py", line 201, in run_commands
      dist.run_commands()
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\dist.py", line 969, in run_commands
      self.run_command(cmd)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\dist.py", line 963, in run_command
      super().run_command(command)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\dist.py", line 988, in run_command
      cmd_obj.run()
    File "D:\Anaconda3\lib\site-packages\wheel\bdist_wheel.py", line 299, in run
      self.run_command('build')
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\cmd.py", line 318, in run_command
      self.distribution.run_command(command)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\dist.py", line 963, in run_command
      super().run_command(command)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\dist.py", line 988, in run_command
      cmd_obj.run()
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\command\build.py", line 131, in run
      self.run_command(cmd_name)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\cmd.py", line 318, in run_command
      self.distribution.run_command(command)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\dist.py", line 963, in run_command
      super().run_command(command)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\dist.py", line 988, in run_command
      cmd_obj.run()
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\command\build_ext.py", line 89, in run
      _build_ext.run(self)
    File "D:\Anaconda3\lib\site-packages\Cython\Distutils\old_build_ext.py", line 186, in run
      _build_ext.build_ext.run(self)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\command\build_ext.py", line 345, in run
      self.build_extensions()
    File "D:\Anaconda3\lib\site-packages\Cython\Distutils\old_build_ext.py", line 195, in build_extensions
      _build_ext.build_ext.build_extensions(self)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\command\build_ext.py", line 467, in build_extensions     
      self._build_extensions_serial()
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\command\build_ext.py", line 493, in _build_extensions_ser

ial
self.build_extension(ext)
File "C:\Users\JUN\AppData\Local\Temp\pip-install-985i10gf\sherpa-ncnn_ba8b4b28c1e341d5b0c5c9024ca193fc\cmake\cmake_extension.py", line 93, in b
uild_extension
raise Exception("Failed to configure sherpa")
Exception: Failed to configure sherpa
[end of output]

note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for sherpa-ncnn
Running setup.py clean for sherpa-ncnn
Failed to build sherpa-ncnn
Installing collected packages: sherpa-ncnn
Running setup.py install for sherpa-ncnn ... error
error: subprocess-exited-with-error

× Running setup.py install for sherpa-ncnn did not run successfully.
│ exit code: 1
╰─> [80 lines of output]
running install
C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools_distutils\cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is depr
ecated.
!!

          ********************************************************************************
          Please avoid running ``setup.py`` directly.
          Instead, use pypa/build, pypa/installer or other
          standards-based tools.
 
          See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details.
          ********************************************************************************
 
  !!
    self.initialize_options()
  running build
  running build_py
  creating build
  creating build\lib.win-amd64-cpython-39
  creating build\lib.win-amd64-cpython-39\sherpa_ncnn
  copying sherpa-ncnn\python\sherpa_ncnn\recognizer.py -> build\lib.win-amd64-cpython-39\sherpa_ncnn
  copying sherpa-ncnn\python\sherpa_ncnn\__init__.py -> build\lib.win-amd64-cpython-39\sherpa_ncnn
  running build_ext
  Setting PYTHON_EXECUTABLE to D:\Anaconda3\python.exe
  build command is:
 
           cmake -DCMAKE_BUILD_TYPE=Release -DPYTHON_EXECUTABLE=D:\Anaconda3\python.exe -DCMAKE_INSTALL_PREFIX=C:\Users\JUN\AppData\Local\Temp\pip-i

nstall-985i10gf\sherpa-ncnn_ba8b4b28c1e341d5b0c5c9024ca193fc\build\lib.win-amd64-cpython-39\sherpa_ncnn -DBUILD_SHARED_LIBS=ON -DSHERPA_NCNN_ENABLE_PY
THON=ON -DSHERPA_NCNN_ENABLE_PORTAUDIO=OFF -B build\temp.win-amd64-cpython-39\Release -S C:\Users\JUN\AppData\Local\Temp\pip-install-985i10gf\sherpa-n
cnn_ba8b4b28c1e341d5b0c5c9024ca193fc
cmake --build build\temp.win-amd64-cpython-39\Release --target install --config Release -- -m

  'cmake' 不是内部或外部命令，也不是可运行的程序
  或批处理文件。
  Traceback (most recent call last):
    File "<string>", line 2, in <module>
    File "<pip-setuptools-caller>", line 34, in <module>
    File "C:\Users\JUN\AppData\Local\Temp\pip-install-985i10gf\sherpa-ncnn_ba8b4b28c1e341d5b0c5c9024ca193fc\setup.py", line 42, in <module>
      setuptools.setup(
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\__init__.py", line 103, in setup
      return distutils.core.setup(**attrs)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\core.py", line 185, in setup
      return run_commands(dist)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\core.py", line 201, in run_commands
      dist.run_commands()
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\dist.py", line 969, in run_commands
      self.run_command(cmd)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\dist.py", line 963, in run_command
      super().run_command(command)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\dist.py", line 988, in run_command
      cmd_obj.run()
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\command\install.py", line 79, in run
      return orig.install.run(self)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\command\install.py", line 697, in run
      self.run_command('build')
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\cmd.py", line 318, in run_command
      self.distribution.run_command(command)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\dist.py", line 963, in run_command
      super().run_command(command)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\dist.py", line 988, in run_command
      cmd_obj.run()
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\command\build.py", line 131, in run
      self.run_command(cmd_name)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\cmd.py", line 318, in run_command
      self.distribution.run_command(command)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\dist.py", line 963, in run_command
      super().run_command(command)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\dist.py", line 988, in run_command
      cmd_obj.run()
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\command\build_ext.py", line 89, in run
      _build_ext.run(self)
    File "D:\Anaconda3\lib\site-packages\Cython\Distutils\old_build_ext.py", line 186, in run
      _build_ext.build_ext.run(self)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\command\build_ext.py", line 345, in run
      self.build_extensions()
    File "D:\Anaconda3\lib\site-packages\Cython\Distutils\old_build_ext.py", line 195, in build_extensions
      _build_ext.build_ext.build_extensions(self)
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\command\build_ext.py", line 467, in build_extensions     
      self._build_extensions_serial()
    File "C:\Users\JUN\AppData\Roaming\Python\Python39\site-packages\setuptools\_distutils\command\build_ext.py", line 493, in _build_extensions_ser

ial
self.build_extension(ext)
File "C:\Users\JUN\AppData\Local\Temp\pip-install-985i10gf\sherpa-ncnn_ba8b4b28c1e341d5b0c5c9024ca193fc\cmake\cmake_extension.py", line 93, in b
uild_extension
raise Exception("Failed to configure sherpa")
Exception: Failed to configure sherpa
[end of output]

note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure

× Encountered error while trying to install package.
╰─> sherpa-ncnn

note: This is an issue with the package mentioned above, not pip.
hint: See above for output from the failure.

yy123hd commented

和上面一样的错误

csukuangfj commented

pip install cmake

这个命令的输出，请贴一下。

yy123hd commented

Defaulting to user installation because normal site-packages is not writeable
Requirement already satisfied: cmake in c:\users\jun\appdata\roaming\python\python39\site-packages (3.28.3)

csukuangfj commented

cmake --version

这个有输出吗

csukuangfj commented

最快的解决方法

pip install sherpa-ncnn==2.1.6

正在发布 2.1.7

yy123hd commented

pip install sherpa-ncnn==2.1.6 这个可以安装上了

yy123hd commented

请问 这个命令cmake --version在哪里执行可以查看版本？

csukuangfj commented

请问 这个命令cmake --version在哪里执行可以查看版本？

在命令行执行。你的错误，是因为你没有安装 cmake

yy123hd commented

那为何pip install cmake 的输出显示的是上面那个输出呀？我试了 pip list 里面也有cmake 显示3.28.3

csukuangfj commented

cmake --version

这个有输出吗

你这个跑了吗

csukuangfj commented

现在可以跑

pip install -U sherpa-ncnn

如果还不行，就用

pip install -U --no-cache-dir sherpa-ncnn

这个会安装最新的 sherpa-ncnn, 即 2.1.7

yy123hd commented

cmake --version
这个有输出吗

你这个跑了吗

'cmake' 不是内部或外部命令，也不是可运行的程序
或批处理文件。
显示这个

yy123hd commented

现在可以跑

pip install -U sherpa-ncnn

如果还不行，就用

pip install -U --no-cache-dir sherpa-ncnn

这个会安装最新的 sherpa-ncnn, 即 2.1.7

刚刚的pip install sherpa-ncnn==2.1.6 这个安装成功了

csukuangfj commented

c:\users\jun\appdata\roaming\python\python39

如果你想解决的话，可以去上面的路径，找找有没有一个叫做 cmake.exe 的可执行程序。
如果不想花时间的话，你现在已经成功安装 sherpa-ncnn 了，可以使用了。

yy123hd commented

好的谢谢您