DPS3215 locks up periodically with opendps firmare

[abzman]

I experienced this before calibration, and it's still happening after calibration. It's possible the screen just stops responding, because I can hear the fan come on and off when I press the power button. I have a 36v 11A supply to back this unit, I calibrated it and told it the max amperage it could drive was 10A, this is the resulting calibration report.

Calibration Report:
A_ADC_K = 4.377185344696045
A_ADC_C = -260.4835205078125
A_DAC_K = 0.25430262088775635
A_DAC_C = 263.3804931640625
V_ADC_K = 8.133505821228027
V_ADC_C = -109.9773178100586
V_DAC_K = 0.1118573322892189
V_DAC_C = 8.37867546081543
VIN_ADC_K = 16.66666603088379
VIN_ADC_C = 118.33333587646484
VIN_ADC = 2305
VOUT_ADC = 14
IOUT_ADC = 0
IOUT_DAC = 0
VOUT_DAC = 0

I have attached the files grabbed before I changed the firmware in case that might help.

5v-on.txt
7v-off.txt
7v-on.txt
10v-off.txt
10v-on.txt
5v-off.txt

[polihedron]

hi, maybe it's related to #203

[abzman]

I lopped out the ifdef around:

#ifdef DPS5015
#define TFT_CSN_PORT GPIOA
#define TFT_CSN_PIN GPIO8
#endif

and recompiled. I had some issues and had to rewipe the whole unit and reflash from scratch, but it seems to work now. I'll keep testing

[abzman]

seems stable now, just treat the DPS3215 like a DPS5015