Add support for the CTEU-02/01 Temperature sensor
Closed this issue · 2 comments
No MQTT devices or datapoints are created for my CTEU-02/01
battery driven dual channel temperature sensor.
Temperature channel A is assigned datapoint 35, and B is 36.
In the Eaton MRF, each channel is set to send the raw temperature value. There's also an option to send on/off commands to an (heating) actuator, but it's grayed out an unavailable when connected to my ECI.
Output from the log when temperature data is received:
2023/11/26 19:11:56 RX: [c12362030000fa00003f0501]
2023/11/26 19:11:56 Received message from unknown datapoint 35
2023/11/26 19:11:56 Message not handled [c12362030000fa00003f0501]
2023/11/26 19:11:58 RX: [c124620300070800003f0502]
2023/11/26 19:11:58 Received message from unknown datapoint 36
2023/11/26 19:11:58 Message not handled [c124620300070800003f0502]
I'll guess some more logs are required to be able to read and decode the information sent from the device itself. I've enabled verbose
, but it only showed the RX log lines extra, nothing else.
I only want the temperatures to be be reported to HASS, so that I can read room temperature etc.
Can you attach the DPL file?
Sorry, user error. I forgot to upload the DP list to my ECI after adding the temperature sensor to my system.
Now temperature, battery status and signal strength shows up as expected.
I haven't physically connected any probe to channel B yet, but strangely it shows an temperature of 180 °C. Maybe that reading should show up as Unavailable
in HA instead? Anyway, that's an separate issue, for now I'll just ignore it until I get the second probe connected...
EDIT 1:
2023/11/27 13:32:35 EPROM: [d162000000000000]
2023/11/27 13:32:35 Status list messages currently ignored: 62
2023/11/27 13:32:35 RX: [c12362030000f200003c0503]
2023/11/27 13:32:35 Device 5308500 (channel 0-'Temperaturinngang (Kanal A)') sent message (battery new, signal good, cyclic false) event 'value' with value 24.2
2023/11/27 13:32:37 EPROM: [d162000000000000]
2023/11/27 13:32:37 Status list messages currently ignored: 62
2023/11/27 13:32:37 RX: [c124620300070800003a0504]
2023/11/27 13:32:37 Device 5308500 (channel 1-'Temperaturinngang (Kanal B)') sent message (battery new, signal good, cyclic false) event 'value' with value 180
EDIT 2:
27.11.2023 16:15:41 +291 Sek. Temperaturinngang (Kanal A) sender <MÅLEVERDI> til ECI (DP:35) : 26.0 (Batteri: fullt) 78 %
27.11.2023 16:15:41 +0.0953 ECI sender <BEKREFTELSE> til Temperaturinngang (Netzversorgt) 96 %
27.11.2023 16:15:43 +2.1365 Temperaturinngang (Kanal B) sender <MÅLEVERDI> til ECI (DP:36) : 180.0 (Batteri: fullt) 82 %
27.11.2023 16:15:43 +0.0902 ECI sender <BEKREFTELSE> til Temperaturinngang (Netzversorgt) 96 %