kennetek/gridfinity-rebuilt-openscad

gridfinity-spiral-vase.scad: Assertion 'is_num(height_mm)' failed

vaz-ar opened this issue · 6 comments

vaz-ar commented

I tried opening gridfinity-spiral-vase.scad in openSCAD and I got the following error:

Parsing design (AST generation)...
Compiling design (CSG Tree generation)...
[ERROR: Assertion 'is_num(height_mm)' failed in file gridfinity-rebuilt-utility.scad, line 419](https://github.com/kennetek/gridfinity-rebuilt-openscad/issues/419,C:/Users/Arnaud/Documents/_Workspace/gridfinity-rebuilt-openscad/gridfinity-rebuilt-utility.scad)
[TRACE: called by 'assert' in file gridfinity-rebuilt-utility.scad, line 419](https://github.com/kennetek/gridfinity-rebuilt-openscad/issues/419,C:/Users/Arnaud/Documents/_Workspace/gridfinity-rebuilt-openscad/gridfinity-rebuilt-utility.scad)
[TRACE: call of 'profile_wall(height_mm = undef)' in file gridfinity-rebuilt-utility.scad, line 418](https://github.com/kennetek/gridfinity-rebuilt-openscad/issues/418,C:/Users/Arnaud/Documents/_Workspace/gridfinity-rebuilt-openscad/gridfinity-rebuilt-utility.scad)
[TRACE: called by 'profile_wall' in file gridfinity-spiral-vase.scad, line 364](https://github.com/kennetek/gridfinity-rebuilt-openscad/issues/364,C:/Users/Arnaud/Documents/_Workspace/gridfinity-rebuilt-openscad/gridfinity-spiral-vase.scad)
[TRACE: called by 'if' in file gridfinity-spiral-vase.scad, line 364](https://github.com/kennetek/gridfinity-rebuilt-openscad/issues/364,C:/Users/Arnaud/Documents/_Workspace/gridfinity-rebuilt-openscad/gridfinity-spiral-vase.scad)
[TRACE: called by 'children' in file gridfinity-rebuilt-utility.scad, line 439](https://github.com/kennetek/gridfinity-rebuilt-openscad/issues/439,C:/Users/Arnaud/Documents/_Workspace/gridfinity-rebuilt-openscad/gridfinity-rebuilt-utility.scad)
[TRACE: called by 'children' in file generic-helpers.scad, line 161](https://github.com/kennetek/gridfinity-rebuilt-openscad/issues/161,C:/Users/Arnaud/Documents/_Workspace/gridfinity-rebuilt-openscad/generic-helpers.scad)
[TRACE: called by 'linear_extrude' in file generic-helpers.scad, line 160](https://github.com/kennetek/gridfinity-rebuilt-openscad/issues/160,C:/Users/Arnaud/Documents/_Workspace/gridfinity-rebuilt-openscad/generic-helpers.scad)
[TRACE: called by 'multmatrix' in file generic-helpers.scad, line 159](https://github.com/kennetek/gridfinity-rebuilt-openscad/issues/159,C:/Users/Arnaud/Documents/_Workspace/gridfinity-rebuilt-openscad/generic-helpers.scad)
[TRACE: called by 'for' in file generic-helpers.scad, line 158](https://github.com/kennetek/gridfinity-rebuilt-openscad/issues/158,C:/Users/Arnaud/Documents/_Workspace/gridfinity-rebuilt-openscad/generic-helpers.scad)
[TRACE: called by 'union' in file generic-helpers.scad, line 156](https://github.com/kennetek/gridfinity-rebuilt-openscad/issues/156,C:/Users/Arnaud/Documents/_Workspace/gridfinity-rebuilt-openscad/generic-helpers.scad)
[TRACE: call of 'sweep_rounded(width = 33.999, length = 33.999)' in file generic-helpers.scad, line 121](https://github.com/kennetek/gridfinity-rebuilt-openscad/issues/121,C:/Users/Arnaud/Documents/_Workspace/gridfinity-rebuilt-openscad/generic-helpers.scad)
[TRACE: called by 'sweep_rounded' in file gridfinity-rebuilt-utility.scad, line 438](https://github.com/kennetek/gridfinity-rebuilt-openscad/issues/438,C:/Users/Arnaud/Documents/_Workspace/gridfinity-rebuilt-openscad/gridfinity-rebuilt-utility.scad)

looking at the code I saw that profile_wall is called without any parameter (line 364)

                if (enable_lip) profile_wall();
                else profile_wall2();

and it looks like there are other issues in the file, like a call to profile_wall_sub that is not a defined module.

jpypi commented

Looks like @EmperorArthur's PR #175 changed the definition of profile_wall to take a parameter and removed profile_wall_sub...

EmperorArthur commented

Looks like @EmperorArthur's PR #175 changed the definition of profile_wall to take a parameter and removed profile_wall_sub...

Downside of not using an IDE. Global search/replace is only per file, and will do partial words, so I avoid it.

It may be worth it to see about creating a github action to exercise some more of the code.

One of my goals is to slowly remove the need for non constant global variables, which is why that was added. At the least assertions help to find the problem sooner.

  • 👍2
EmperorArthur commented

I am re-working PR #179 with some simple test cases . Which can then be expanded in the future to make sure I don't break anything else.

I am almost done and will work on fixing this issue next.

  • 👍2