[BUG] Speedoption in the axis menu has no effect on Z ON Anycubic Mega Pro
Opened this issue · 3 comments
Bug Description
In the axis menu where the individual axes can be moved, the speed of the respective movement can also be set. This works for X and Y, but not for Z. Also, the movements of the Z axis are generally slow. This works perfectly with the original firmware.
Steps to Reproduce
- Go to TOOLS
- Choose axis
- Set Speed to L => low
- Push 1.0 for X+ and X- the speed is slow
- Push 1.0 for Z+ and Z- the speed is slow
- Set Speed to H => High
- Push 1.0 for X+ and X- the speed is fast
- Push 1.0 for Z+ and Z- the speed is slow
Expected behavior: [What you expect to happen]
The speed setting should also have an effect on the Z axis.
Actual behavior: [What actually happens]
Currently, the movement of the Z axis is generally slow
Additional Information
- Provide pictures or links to videos that clearly demonstrate the issue.
- See How Can I Contribute for additional guidelines.
Hi @nicokaiser79 , can you please tell me the exact type of printer and also whether you have made any changes to it?
Hi @knutwurst i have a anycubic mega pro. I added a TCM2208 driver with reversed plug for compatibility original firmware. So I switch actually between original and current firmware (laser and 3d printing). P.S: at the moment I want to try to complete the laser issue for bmp printing in the current marlin firmware.
So i fix it, I take the values from original firmware. In Configuration.h for KNUTWURST_MEGA_P
#define DEFAULT_AXIS_STEPS_PER_UNIT {80, 80, 400, 384}
#define DEFAULT_MAX_FEEDRATE { 300, 300, 10, 80 }
#define DEFAULT_MAX_ACCELERATION {1500, 1500, 800, 10000}