EnergyToday EnergyTotal Problem
Closed this issue · 8 comments
Thank you very much for this guide!
I've got an issue. On restart, the daily and total energy get very high values from somewhere. I used the Tasmota energyreset to zero them out, but when I restart the device, they get overwritten with ~5000 KWh or so.
The voltage, power and current energy seems about right, it's just on restart that the total energy gets a bad value.
which version of tasmota are you using?
I was first trying with 9.4.0, but there was a problem with the template.
So instead I think I switched to 9.2.0 and it works besides the energy values after restart.
i use 9.4.0 for myself with this template:
{"NAME":"Hiking DDS238-2 WIFI","GPIO":[0,2272,0,2304,0,0,0,0,0,0,320,0,32,0],"FLAG":0,"BASE":54}
and i do not have such issues...
this was an issue with some of the "older" versions if i remember it correctly...
I think the template is running fine. The problem is just on restart it gets a bad value for Today's KWh from somewhere. I copied your rules, but don't know what's the exact process and from where that bad values might come.
perhaps you can do a dump of your config in json format with https://github.com/tasmota/decode-config and send it to me, than i can compare your config with mine...
Use 9.5.x or later and see if the problem persists. Older versions have problems with large kwh values measurement.
solved in version >= 9.5