krontech/chronos-cam-app

Issues

• Text overlay sometimes shows when it should be disabled

  #128 opened 5 years ago
  2

• freeze when trying to save TIFF or TIFF Raw

  #127 opened 5 years ago
  0

• Folder path lineEdit was not disabled during saving

  #126 opened 5 years ago
  1

• minimum bits/pixel is 0

  #125 opened 5 years ago
  1

• Add screenshot to playback window

  #124 opened 5 years ago
  0

• Focus peaking intensity not persistent over reboot

  #123 opened 5 years ago
  0

• Debounce can't be enabled

  #122 opened 5 years ago
  4

• Util - Factory - White Reference and Factory Calibration do nothing

  #121 opened 5 years ago
  1

• Util - Factory - serial number not correctly reported

  #120 opened 5 years ago
  3

• Black Cal all resolutions: “Error during black calibration, error 22: API call fail”

  #119 opened 5 years ago
  0

• After enabling shipping mode and rebooting, shipping mode is still enabled

  #118 opened 5 years ago
  1

• Factory Calibration button on the Util screen is visible before entering the password

  #117 opened 5 years ago
  1

• Low brightness and/or Vertical lines after reboot or changing resolution

  #116 opened 5 years ago
  1

• Zebra stripes aren't enabled after reboot

  #115 opened 5 years ago
  2

• White balance has no effect

  #114 opened 5 years ago
  0

• Record Settings - Max exposure button doesnt set correct max if framerate is below maximum

  #113 opened 5 years ago
  2

• Auto power mode - camera doesn't Turn off if AC removed

  #112 opened 5 years ago
  3

• Focus aid is disabled after resolution change, even if it was enabled before.

  #111 opened 5 years ago
  1

• Abort button not greyed out at end of save, if saving in H.264 (debian)

  #110 opened 5 years ago
  1

• Sometimes cannot start a second recording

  #109 opened 5 years ago
  1

• Overexposed areas are not white

  #108 opened 5 years ago
  0

• Text overlay always assumes frame period of 4ms

  #107 opened 5 years ago
  2

• Record settings - garbage data at end of lineEdits when framerate < 100

  #106 opened 5 years ago
  1

• Freeze when trying to save

  #105 opened 5 years ago
  1

• Record Settings - 320-wide resolutions don't work and are not listed in dropdown

  #104 opened 5 years ago
  2

• At some exposure settings, black cal doesn’t work 100% correctly

  #103 opened 5 years ago
  2

• Gain is set higher than it should be

  #102 opened 5 years ago
  0

• Revert/restore defaults not working

  #101 opened 5 years ago
  1

• Camapp doesnt start

  #100 opened 5 years ago
  1

• Overlay shows incorrect time if recording was stopped early while trigger delay enabled

  #99 opened 5 years ago
  2

• Reverting to default settings may leave multiple instances of camApp running, and freezing/unresponsiveness

  #98 opened 5 years ago
  3

• Auto Power Mode always shows Disabled regardless of what is set

  #97 opened 5 years ago
  2

• First frame of non-h264 saves is corrupted

  #96 opened 5 years ago
  0

• 320x120 resolution - Flickering bar at top of screen while recording

  #95 opened 5 years ago
  0

• DNG incompatibility with Adobe Camera Raw

  #94 opened 5 years ago
  0

• Increase in memory not detected in playback screen

  #93 opened 5 years ago
  2

• Can't format or eject a USB device if it is mounted as sdb instead of sda

  #92 opened 5 years ago
  3

• Util screen - sometimes "clicking" the tabs does not change to them but only highlights them

  #91 opened 5 years ago
  2

• Abort button not greyed out at end of save, if saving in H.264

  #90 opened 5 years ago
  1

• Playback window - Abort Save button is re-enabled before the other buttons

  #89 opened 5 years ago
  1

• Util - Storage - GB/GiB usage not consistent

  #88 opened 5 years ago
  1

• Camapp crashes when saving a very short recording

  #87 opened 5 years ago
  1

• Vertical lines in image after Auto Factory Cal

  #86 opened 5 years ago
  2

• White balance resets to custom after reset, close, reopen

  #85 opened 5 years ago
  0

• Camapp should check the presence of SD/USB/eSATA before formatting

  #84 opened 5 years ago
  3

• Very low fps on live display after saving with autorecord

  #83 opened 5 years ago
  0

• save abort message is shown for only a very short time

  #82 opened 5 years ago
  2

• Incorrect TIFF tags produced by monochrome camera

  #81 opened 5 years ago
  2

• v0.3.2 - Saved videos - Frame #2 is whatever frame is selected on the playback window

  #80 opened 5 years ago
  1

• Text overlay looks bad for lower resolution recordings

  #79 opened 5 years ago
  4