kernel 4.0.15 ，insmod 出现下面错误
Clssrie opened this issue · 1 comments
[ 86.812115] mt7601u: disagrees about version of symbol module_layout
[ 314.363365] usb 1-1: USB disconnect, device number 4
[ 314.368570] mt7601u: probe of 1-1:1.0 failed with error -5
[ 314.378700] usbcore: registered new interface driver mt7601u
[ 314.493142] usb 1-1: new full-speed USB device number 5 using ci_hdrc
[ 314.733284] usb 1-1: new full-speed USB device number 6 using ci_hdrc
[ 314.973373] usb 1-1: new full-speed USB device number 7 using ci_hdrc
[ 315.007776] usb 1-1: No LPM exit latency info found, disabling LPM.
[ 315.014773] usb 1-1: not running at top speed; connect to a high speed hub
[ 315.173413] mt7601u: probe of 1-1:1.0 failed with error -5
[ 315.181230] usb 1-1: USB disconnect, device number 7
[ 315.303150] usb 1-1: new full-speed USB device number 8 using ci_hdrc
[ 315.543259] usb 1-1: new full-speed USB device number 9 using ci_hdrc
[ 315.783199] usb 1-1: new full-speed USB device number 10 using ci_hdrc
[ 315.817773] usb 1-1: No LPM exit latency info found, disabling LPM.
[ 315.824764] usb 1-1: not running at top speed; connect to a high speed hub
[ 315.983497] mt7601u: probe of 1-1:1.0 failed with error -5
[ 315.991399] usb 1-1: USB disconnect, device number 10
[ 316.113148] usb 1-1: new full-speed USB device number 11 using ci_hdrc
[ 316.353250] usb 1-1: new full-speed USB device number 12 using ci_hdrc
[ 316.593424] usb 1-1: new full-speed USB device number 13 using ci_hdrc
[ 316.627777] usb 1-1: No LPM exit latency info found, disabling LPM.
[ 316.634765] usb 1-1: not running at top speed; connect to a high speed hub
[ 316.793395] mt7601u: probe of 1-1:1.0 failed with error -5
[ 316.801540] usb 1-1: USB disconnect, device number 13
[ 316.923155] usb 1-1: new full-speed USB device number 14 using ci_hdrc
[ 317.163324] usb 1-1: new full-speed USB device number 15 using ci_hdrc
[ 317.403308] usb 1-1: new high-speed USB device number 16 using ci_hdrc
[ 317.583174] usb 1-1: reset high-speed USB device number 16 using ci_hdrc
[ 317.737413] mt7601u 1-1:1.0: ASIC revision: 76010001 MAC revision: 76010500
[ 317.819970] mt7601u 1-1:1.0: Warning: unsupported EEPROM version 0d
[ 317.826358] mt7601u 1-1:1.0: EEPROM ver:0d fae:00
[ 318.078363] ieee80211 phy4: Selected rate control algorithm 'minstrel_ht'
[ 318.408833] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Not enough info to investigate this.