Information on required gRPC endpoints seems to be incomplete
Rob2309 opened this issue · 4 comments
Section 2 of the docs state
CSI Node service
Only NodePublishVolume, NodeUnpublishVolume, and NodeGetCapabilities are required.
Required methods enable callers to make a volume available at a specified path and discover what optional functionality the driver supports.
When developing a simple mock CSI driver, I noticed that the node-driver-registrar
will call NodeGetInfo
unconditionally and refuse to register the driver when this endpoint is not implemented. Thus, I think this endpoint qualifies as being basically mandatory for kubernetes, at least when using the tools proposed in the docs.
The Kubernetes project currently lacks enough contributors to adequately respond to all issues.
This bot triages un-triaged issues according to the following rules:
- After 90d of inactivity,
lifecycle/stale
is applied - After 30d of inactivity since
lifecycle/stale
was applied,lifecycle/rotten
is applied - After 30d of inactivity since
lifecycle/rotten
was applied, the issue is closed
You can:
- Mark this issue as fresh with
/remove-lifecycle stale
- Close this issue with
/close
- Offer to help out with Issue Triage
Please send feedback to sig-contributor-experience at kubernetes/community.
/lifecycle stale
The Kubernetes project currently lacks enough active contributors to adequately respond to all issues.
This bot triages un-triaged issues according to the following rules:
- After 90d of inactivity,
lifecycle/stale
is applied - After 30d of inactivity since
lifecycle/stale
was applied,lifecycle/rotten
is applied - After 30d of inactivity since
lifecycle/rotten
was applied, the issue is closed
You can:
- Mark this issue as fresh with
/remove-lifecycle rotten
- Close this issue with
/close
- Offer to help out with Issue Triage
Please send feedback to sig-contributor-experience at kubernetes/community.
/lifecycle rotten
The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.
This bot triages issues according to the following rules:
- After 90d of inactivity,
lifecycle/stale
is applied - After 30d of inactivity since
lifecycle/stale
was applied,lifecycle/rotten
is applied - After 30d of inactivity since
lifecycle/rotten
was applied, the issue is closed
You can:
- Reopen this issue with
/reopen
- Mark this issue as fresh with
/remove-lifecycle rotten
- Offer to help out with Issue Triage
Please send feedback to sig-contributor-experience at kubernetes/community.
/close not-planned
@k8s-triage-robot: Closing this issue, marking it as "Not Planned".
In response to this:
The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.
This bot triages issues according to the following rules:
- After 90d of inactivity,
lifecycle/stale
is applied- After 30d of inactivity since
lifecycle/stale
was applied,lifecycle/rotten
is applied- After 30d of inactivity since
lifecycle/rotten
was applied, the issue is closedYou can:
- Reopen this issue with
/reopen
- Mark this issue as fresh with
/remove-lifecycle rotten
- Offer to help out with Issue Triage
Please send feedback to sig-contributor-experience at kubernetes/community.
/close not-planned
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.