An ArduPy library for Grove - Temp&Humi&Barometer Sensor (BME280). Grove BME280 provides a precise measurement of not only barometric pressure and temperature, but also the humidity in the environment. The air pressure can be measured in a range from 300 hPa to 1100hPa with ±1.0 hPa accuracy, while the sensor works perfectly for temperatures between - 40℃ and 85℃ with an accuracy of ±1℃. As for the humidity, you can get a humidity value with an error less than 3%.
- Install AIP
pip3 install aip- Build firmware with Seeed ArduPy bme280
aip install https://github.com/Seeed-Studio/seeed-ardupy-bme280
aip build- Flash new firmware to you ArduPy board
aip flash [Ardupy Bin PATH]For more examples of using AIP, please refer to AIP.
from arduino import grove_bme280
import time
bme280 = grove_bme280()
while True:
print ("Temperature: ", bme280.temperature, "C")
print ("Humidity: ", bme280.humidity, "%")
print ("Pressure: ", bme280.pressure, "Pa")
time.sleep(1)This software is written by seeed studio
and is licensed under The MIT License. Check License.txt for more information.
Contributing to this software is warmly welcomed. You can do this basically by
forking, committing modifications and then pulling requests (follow the links above
for operating guide). Adding change log and your contact into file header is encouraged.
Thanks for your contribution.
Seeed Studio is an open hardware facilitation company based in Shenzhen, China.
Benefiting from local manufacture power and convenient global logistic system,
we integrate resources to serve new era of innovation. Seeed also works with
global distributors and partners to push open hardware movement.