Problem with EM061K-GL on T14s G5

[galibozek]

I have a problem with establishing a connection using Quectel EM061K-GL on T14s G5.
The modem registers on the network

  -----------------------------------
  Status   |                    lock: sim-pin2
           |          unlock retries: sim-pin2 (3)
           |                   state: registered

but does not connect, connecting state over and over again....

It looks like it has the wrong carrier config set, in my opinion it should be ROW_Commercial.

  -----------------------------------
  Hardware |            manufacturer: Quectel
           |                   model: EM061K-GL
           |       firmware revision: EM061KGLAAR01A02M2G
           |          carrier config: Commercial-DT-VOLTE
           | carrier config revision: 08011F1F
           |            h/w revision: EM061K-GL

I could change it with AT commands, but it looks like the serial port is not available (disabled by lenovo?) :/
How can this be changed?

(On Windows same problem, I updated the firmware but it did not change the profile)

[nitinexclusively]

Can you please retry after inputting below command with correct APN information and reboot machine ?
mmcli -m 0 --3gpp-set-initial-eps-bearer-settings=apn=xxxx,ip-type=IPV4V6,allowed-auth=chap,user=xxxx,password=xxxx

Please replace "xxxx" in above command with correct information.

Also , can you please attached output of below commands after reboot:

• cat /var/log/syslog | grep -i dpr_fcc
• mmcli -m any

Thank you

[galibozek]

Thanks, it works, after run

mmcli -m 0 --3gpp-set-initial-eps-bearer-settings=apn=internet,ip-type=IPV4V6,allowed-auth=chap

[nitinexclusively]

Thanks for your update!
This looks to me as attach apn issue . Let me close this ticket here!