libratbag/piper

unable to set Logitech g502 Lightspeed Led's

Opened this issue · 6 comments

Will2knz commented

unable to set the led's to a solid color or off . Apply the settings seems to do nothing and the led's stay in a cycle mode.

jarbarsi commented

I am also experiencing this issue, I've found that changing the profile in the upper left to any other than the currently selected and then back causes the LEDs to update, while the apply button does nothing to the LEDs.

AsaTheUncle commented

I am also unable to change the LEDs on Logitech G703. When applying it restarts the breathing cycle, nothing else.

marcinmielni commented

Debian 12, G502, piper 0.7-1. Applying settings only restarted the cycle, when changed profile in upper left corner profile1(default)->profile0 changes were applied.

  • 👍2
pricardo73 commented

I am also unable to change the LEDs on Logitech G703. When applying it restarts the breathing cycle, nothing else.

Try changing to profile 0 at upper left corner .
I have a G703 and worked for me.

  • 👍1
AsaTheUncle commented

I am also unable to change the LEDs on Logitech G703. When applying it restarts the breathing cycle, nothing else.

Try changing to profile 0 at upper left corner . I have a G703 and worked for me.

Thanks, this did work for my G703.

ASRodrigo1 commented

I am also unable to change the LEDs on Logitech G703. When applying it restarts the breathing cycle, nothing else.

Try changing to profile 0 at upper left corner . I have a G703 and worked for me.

G703 here as well. Worked for me. Thank you!