Xray is a low detectable VPN. server-xray is a Xray server container that runs Xray with config file generated from command line options directly hence remove the necessity of Xray config modification.
Please have a look over the sibling project proxy-xray if you'd like to set a Xray client.
The following command will:
- Update DDNS record of mydomain.duckdns.org pointing the current host
- Request a new Lesencrypt TLS cert for this domain
- Start VLESS-TCP-XTLS server on port 443
$ docker run --name server-xray -p 80:80 -p 443:2443 -d samuelhbne/server-xray \
--ltx p=2443,d=mydomain.duckdns.org,u=myid,f=:8080 \
-k https://duckdns.org/update/mydomain/c9711c65-db21-4f8c-a790-2c32c93bde8c \
-r mydomain.duckdns.org
...
- Please replace the port 443 (-p 443:2443) with the port number you choose for incoming connection.
- Port 80 export (-p 80:80) is necessary for Letsencrypt cert requesting, so don't miss it.
- Please replace "myid" with an id string or a standard UUID ("MyMobile", "b77af52c-2a93-4b3e-8538-f9f91114ba00" etc.) you set for client auth.
- Please replace "mydomain.duckdns.org" with the domain-name of yours.
- You can optionally assign a HOOK-URL to update the DDNS to the current server IP.
Try to connect the server from Xray compatible mobile app like v2rayNG for Android or Shadowrocket for iOS with the host-name, port, id etc. set above. Or verify it from Ubuntu / Debian / Raspbian client host follow the instructions below.
$ docker run --name proxy-xray -p 1080:1080 -d samuelhbne/proxy-xray \
--ltx myid@mydomain.duckdns.org:443
...
$ curl -sSx socks5h://127.0.0.1:1080 https://checkip.amazonaws.com
12.34.56.78
- proxy-xray created a SOCKS5 proxy that tunneling traffic through your Xray server.
- curl query was sent to checkip.amazonaws.com via the SOCKS5 proxy served by proxy-xray.
- Like this: curl --> proxy-xray --> server-xray --> checkip.amazonaws.com website.
- You should get the public IP address of server-xray if all go well.
- Please have a look over the sibling project proxy-xray for more details.
$ docker run --rm samuelhbne/server-xray
server-xray <server-options>
--ltx <VLESS-TCP-XTLS option> [p=443,]d=domain.com,u=id[:level[:email]][,f=[fb-host]:fb-port:[fb-path]]
--ltt <VLESS-TCP-TLS option> [p=443,]d=domain.com,u=id[:level[:email]][,f=[fb-host]:fb-port:[fb-path]]
--lttw <VLESS-TCP-TLS-WS option> [p=443,]d=domain.com,u=id[:level[:email]][,f=[fb-host]:fb-port:[fb-path]],w=/webpath
--ltpw <VLESS-TCP-PLAIN-WS option> [p=443,]u=id[:level[:email]][,f=[fb-host]:fb-port:[fb-path]],w=/webpath
--lttg <VLESS-TCP-TLS-GRPC option> [p=443,]d=domain.com,u=id[:level[:email]],s=svcname
--ltpg <VLESS-TCP-PLAIN-GRPC option> [p=443,]u=id[:level[:email]],s=svcname
--mtt <VMESS-TCP-TLS option> [p=443,]d=domain.com,u=id[:level[:email]][,f=[fb-host]:fb-port:[fb-path]]
--mttw <VMESS-TCP-TLS-WS option> [p=443,]d=domain.com,u=id[:level[:email]][,f=[fb-host]:fb-port:[fb-path]],w=/webpath
--mtpw <VMESS-TCP-PLAIN-WS option> [p=443,]u=id[:level[:email]][,f=[fb-host]:fb-port:[fb-path]],w=/webpath
--ttt <TROJAN-TCP-TLS option> [p=443,]d=domain.com,u=psw[:level[:email]][,f=[fb-host]:fb-port:[fb-path]]
--tttw <TROJAN-TCP-TLS-WS option> [p=443,]d=domain.com,u=psw[:level[:email]][,f=[fb-host]:fb-port:[fb-path]],w=/webpath
--ttpw <TROJAN-TCP-PLAIN-WS option> [p=443,]u=psw[:level[:email]][,f=[fb-host]:fb-port:[fb-path]],w=/webpath
--ng-opt <nginx-options> [p=443,]d=domain0.com[,d=domain1.com][...]
--ng-proxy <nginx-proxy-options> [d=domain0.com,][d=domain1.com][...][h=127.0.0.1,]p=port-backend,l=location,n=ws|grpc
-u|--user <global-user-options> u=id0[:level[:email]][,u=id1][...]
-k|--hook <hook-url> [Optional] DDNS update or notifing URL to be hit
-r|--request-domain <domain-name> [Optional] Domain name to request for letsencrypt cert
-c|--cert-home <cert-home-dir> [Optional] Reading TLS certs from folder <cert-home-dir>/<domain-name>/
-i|--stdin [Optional] Read config from stdin instead of auto generation
-d|--debug [Optional] Start in debug mode with verbose output
$ docker stop server-xray
...
$ docker rm server-xray
...
The following command will:
- Update domain1 and domain2 with the current IP address server-xray running
- Request TLS certs from Letsencrypt for domain1 and domain2
- Create Vless+TLS+Websocket server on port 443 with the cert of domain1
- Create Trojan server on port 8443 with the cert of domain2 as fallback
Port 80 must be exported for TLS domain ownership verification
$ docker run --name server-xray -p 80:80 -p 443:443 -p 8443:8443 -d samuelhbne/server-xray \
--ltx p=443,d=domain1.duckdns.org,u=myid,f=:8443 \
--ttt p=8443,d=domain2.duckdns.org,u=trojan_pass \
-k https://duckdns.org/update/domain1/c9711c65-db21-4f8c-a790-2c32c93bde8c \
-k https://duckdns.org/update/domain2/c9711c65-db21-4f8c-a790-2c32c93bde8c \
-r domain1.duckdns.org \
-r domain2.duckdns.org
...
$ docker run --name proxy-xray -p 1080:1080 -d samuelhbne/proxy-xray --ltx \
myid@mydomain.duckdns.org:443
$ curl -sSx socks5h://127.0.0.1:1080 https://checkip.amazonaws.com
12.34.56.78
$ docker exec -t proxy-xray /status.sh
VPS-Server: domain1.duckdns.org
Xray-URL: vless://myid@domain1.duckdns.org:443?security=xtls&type=tcp&flow=xtls-rprx-direct#domain1.duckdns.org:443
[QR-Code]
...
$ docker run --name proxy-xray2 -p 2080:1080 -d samuelhbne/proxy-xray --ttt \
trojan_pass@domain2.duckdns.org:8443
$ curl -sSx socks5h://127.0.0.1:2080 https://checkip.amazonaws.com
12.34.56.78
$ docker exec -t proxy-xray2 /status.sh
VPS-Server: mydomain.duckdns.org
Xray-URL: trojan://trojan_pass@domain2.duckdns.org:8443#domain2.duckdns.org:8443
[QR-Code]
...
The following command will:
- Assume to read TLS cert from /home/ubuntu/cert/mydomain.duckdns.org/fullchain.cer
- Assume to read private key from /home/ubuntu/cert/mydomain.duckdns.org/mydomain.duckdns.org.key
- Assume mydomain.duckdns.org has been resolved to the current server
- Run Xray in Vless+TLS+Websocket mode on default port 443 with the given cert
- Fallback to microsoft.com if client handshake failed (Anti-detection)
$ docker run --name server-xray -p 443:443 -v /home/ubuntu/cert:/opt/cert -d samuelhbne/server-xray \
--lttw d=mydomain.duckdns.org,u=myid,w=/websocket,f=microsoft.com:80 \
-c /opt/cert
...
$ docker run --name proxy-xray -p 1080:1080 -d samuelhbne/proxy-xray --lttw \
myid@mydomain.duckdns.org:443:/websocket
$ curl -sSx socks5h://127.0.0.1:1080 https://checkip.amazonaws.com
12.34.56.78
$ docker exec -t proxy-xray /status.sh
VPS-Server: mydomain.duckdns.org
Xray-URL: vless://myid@mydomain.duckdns.org:443?security=tls&type=ws&path=%2Fwebsocket#mydomain.duckdns.org:443
[QR-Code]
...
The following command will:
- Assume to read TLS cert from /home/ubuntu/cert/mydomain.duckdns.org/fullchain.cer
- Assume to read private key from /home/ubuntu/cert/mydomain.duckdns.org/mydomain.duckdns.org.key
- Assume mydomain.duckdns.org has been resolved to the current server
- Run Xray in Vless+TCP+PLAN+gRPC mode on port 65443
- Run nginx on port 443 as a TLS front to protect gRPC backend from detection, with the given cert
- Only port 443 will be available for access from internet
$ docker run --name server-xray -p 443:443 -v /home/ubuntu/cert:/opt/cert -d samuelhbne/server-xray \
-c /opt/cert --ng-opt port=443,domain=mydomain.duckdns.org \
--ltpg port=65443,user=myid,service=gsvc \
--ng-proxy port=65443,location=/gsvc,network=grpc
...
$ docker run --name proxy-xray -p 1080:1080 -d samuelhbne/proxy-xray --lttg \
myid@mydomain.duckdns.org:443:gsvc
$ curl -sSx socks5h://127.0.0.1:1080 https://checkip.amazonaws.com
12.34.56.78
$ docker exec -t proxy-xray /status.sh
VPS-Server: mydomain.duckdns.org
Xray-URL: vless://myid@mydomain.duckdns.org:443?security=tls&type=grpc&serviceName=/gsvc&mode=gun#mydomain.duckdns.org:443
[QR-Code]
...
The following command will:
- Assume to read TLS cert from /home/ubuntu/cert/domain*.duckdns.org/fullchain.cer
- Assume to read private key from /home/ubuntu/cert/domain*.duckdns.org/domain*.duckdns.org.key
- Assume domain0.duckdns.org and domain1.duckdns.org has been resolved to the current server
- Run Vless+TCP+PLAN+gRPC service on port 55443, location /svc0, serve all domains
- Run Vless+TCP+PLAN+WebSocket service on port 53443, location /ws1, serve all domains
- Run Trojan+TCP+PLAN+WebSocket service on port 51443, location /ws2, serve only domain1.duckdns.org
- Run nginx on port 443 as a TLS front with the given certs for 2 domains, proxy 3 services with 3 locations
- Only port 443 will be available for access from internet
$ docker run --name server-xray -p 443:443 -v /home/ubuntu/cert:/opt/cert -d samuelhbne/server-xray \
-c /opt/cert \
--ng-opt p=443,d=domain0.duckdns.org,d=domain1.duckdns.org \
--ltpg p=55443,u=myid0,s=svc0 \
--ltpw p=53443,u=myid1,w=/ws1 \
--ttpw p=51443,u=myid2,w=/ws2 \
--ng-proxy p=55443,l=/svc0,n=grpc \
--ng-proxy p=53443,l=/ws1,n=ws \
--ng-proxy d=domain1.duckdns.org,p=51443,l=/ws2,n=ws
...
Only PLAN (NON-TLS) services (--ltpg, --ltpw, --mtpw, -ttpw) can be proxied by Nginx.
$ docker run --name proxy-gsvc -p 1080:1080 -d samuelhbne/proxy-xray --lttg myid0@domain0.duckdns.org:443:/gsvc
$ docker run --name proxy-vless -p 2080:1080 -d samuelhbne/proxy-xray --lttw myid1@domain1.duckdns.org:443:/ws1
$ docker run --name proxy-trojan -p 3080:1080 -d samuelhbne/proxy-xray --tttw myid2@domain0.duckdns.org:443:/ws2
$ curl -sSx socks5h://127.0.0.1:1080 https://checkip.amazonaws.com
12.34.56.78
$ curl -sSx socks5h://127.0.0.1:2080 https://checkip.amazonaws.com
12.34.56.78
$ curl -sSx socks5h://127.0.0.1:3080 https://checkip.amazonaws.com
12.34.56.78
...
The following instruction start server-trojan in debug mode. Output Xray config file and the log to console for connection diagnosis.
$ docker run --rm -p 80:80 -p 443:443 samuelhbne/server-xray \
-k https://duckdns.org/update/mydomain/c9711c65-db21-4f8c-a790-2c32c93bde8c \
--mttw d=mydomain.duckdns.org,u=myid,w=/websocket,f=microsoft.com:80 \
-r mydomain.duckdns.org --debug
...
$ git clone https://github.com/samuelhbne/server-xray.git
$ cd server-xray
$ docker build -t samuelhbne/server-xray .
...
Please refer the official doc for docker-buildx installation
docker buildx build --platform=linux/arm/v7 --output type=docker -t samuelhbne/server-xray:armv7 .
docker buildx build --platform=linux/arm/v6 --output type=docker -t samuelhbne/server-xray:armv6 .
docker buildx build --platform=linux/arm64 --output type=docker -t samuelhbne/server-xray:arm64 .
docker buildx build --platform=linux/amd64 --output type=docker -t samuelhbne/server-xray:amd64 .